Bully Dog 153001 Installation Manual - Parts Included:
of
8
2
Parts included:
ThE SpRINgS: The two springs included with this kit will replace two of the stock springs that are in the trans-
mission valve body.
TRIm valvE a w/RIB: This trim valve
will replace the stock vavle. Trim Valve A is
unique, notice that it has a little rib in the
center. It is very important not to mix up Trim
Valve A with Trim Valve B.
TRIm valvE B: This trim valve does not
have an ribs.
1/8” DRIll BIT: This is a standard off the shelf metal drill bit, you can replace it with a drill bit from a local
hardware store or from your own collection if it is lost.
Parts
ThE mODUlE BOx
Contents:
• Yellow Springs (2)
• Trim Valve A w/rib
• Trim Valve B
• 1/8” Drill Dit
Trim Valve A w/rib
Trim Valve B