Bully Dog Power Pup Installation Manual - Operating Instructions
3
Bill of Ma
terials
Do
wnloader O
ptions
W
arr
an
ty & D
isclaimer
OPERATING INSTRuCTIONS
OPeRaTING INSTRUCTIONS (INSTaLLaTION)
1. Make sure that your key is in the ignition in the off position before you plug the downloader into the vehicle.
The downloader will later prompt you to turn the key to the run position.
2. Connect the cable that comes with the downloader into the top of the downloader and then into the OB-
DII port. The OBDII port is the diagnostic port located underneath the dash on the driver side of the vehicle
(see OBDII Picture Below).
3. Once connected the downloader will light up to begin operations. To install a download in the vehicle simply
follow the on-screen instructions. The sections following in these instructions cover the main points of operat-
ing the downloader: Main Menu, Download Options, Returning to Stock,etc.
Once a download begins it is crucial that
it is not disturbed. Make sure that before
downloading that the batteries are at full
charge. While downloading do not unplug
the downloader or remove the key until the
downloader indicates that the downloader
is complete and prompts you to unplug.
Scroll Left
Scroll Right
No/Exit
Scroll Down
Yes/Enter
Scroll Up
OBD II Port
Opera
ting Instruc
tions
Intr
oduc
tion
Bill of Ma
terials