Bulova ANALOG T200 Settings Manual

Watch Setting Guide  

FEATURES AND APPLICATIONS

Independent Analog (hands) and

Digital (digits) displays of time – the

traditional look of an Analog watch

with the high technology features

available only from a Digital.

Alarm – use to wake you up, as a

reminder for appointments, etc.

Chronograph – use for parking

meters, cooking, sporting events, etc.

Hourly Chime – use to keep track of time passage, as a

reminder for pill taking, etc.

Conventional (am/pm) or 24 hour time format – use 24

hour format for working with computers, military time, etc.

Calendar – Displays month, date and day.

Alarm Demonstration – to demonstrate the alarm, in the Normal

Time or Calendar Displays, simultaneously press and hold B and C

buttons.

THE CONTROLS

A. Crown for setting and synchroniz-

ing analog hands

B. Push Button for advancing num-

bers in set modes, light, alarm demo

(with C), activate/deactivate alarm,

activate/deactivate chime (with C),

chronograph start/stop.

C. Push Button for entering and

selecting set modes, chronograph

split/reset, alarm demo (with B).

D. Push Button for changing digital displays.

THE ANALOG DISPLAY

Hours, Minutes and Seconds are dis-

played in the traditional manner.To set,

merely pull the notched crown out

when the Second hand reaches the 12

o’clock position all hands will stop. At

this point set the Hours and Minutes

(Hour and Minute Hands may be turned

clockwise or counterclockwise). Set the

Minute Hand to the next approaching minute, now the Second

hand can be synchronized with a time signal (telephone beep, etc.)

by pressing the crown in when the signal sounds the exact time.

Note: When moving from one time zone to another, you may opt

to use the Digital display for local time (enabling you to use the

Alarm) and the Analog display for time at the point of departure.

SETTING THE TIME

Press and release D

button until the

Normal Time

Display appears

To set Seconds, press

and hold C button for at least three sec-

onds. Seconds will flash.To set the Seconds

to zero, press “B” button. Seconds synchro-

nization should coincide with the time stan-

dard being used (telephone beep, etc.). If

the seconds are set to “00” between 30 and

59, the minutes will advance by one minute.

This feature is useful for periodically syn-

chronizing your watch to an accurate time

standard.

From Seconds setting press  C  button

again. Minutes will flash. Press and release B

button to advance Minutes.

From Minutes setting press C button again.

Hours will flash. Press and release B button

to advance Hours. make sure to select the

right indicator (above seconds).A for AM

and P for PM.

TO SELECT THE 12/24 HOUR FORMAT

From Hour setting press C button again. The numbers 12 or 24

will flash, an H indicator will appear at the right side of the dis-

play. Use B button to alternate the 12 or 24 Hour format.

After the desired format has been selected, press and release C or

D buttons to return to Normal Time Display.

Note: To return to Normal time, Alarm Time or Calendar display

(depending on the function being set) during any setting

sequence, simply press and release D button. If the setting

sequence is not continued, the display will automatically return to

Normal Time, Alarm Time or Calendar Display (depending on the

function being set) within one minute.

SETTING THE CALENDAR

Press and release D button until

Calendar Display appear.

To set date, press and hold C button for

at least three seconds. Date will flash.

Press and release B button to advance

Date.

From Date setting, press C button again. Month and Date indicator

will flash. Press and release B button to advance Month.

From Month setting, press C button again. Day of Week will flash.

press and release B button to advance Day of Week. To return to

Normal Time Display, press and release D button.

SETTING THE ALARM

Press and release D button until Alarm

Time Display appears.

To set the Alarm Hours, press and release

C button. Hours will flash. Press and

release B button to advance Hours.

From Hours setting, press C button

again.The Minute Digit will flash. Press and release B button to

advance the Minute Digit. Press and release C button to return to

Alarm Time Display. Use D button to return to Normal Time

Display.

To activate or deactivate the alarm: In the Alarm Time Mode, press

and release B button to activate or deactivate the alarm (alarm

symbol will appear at the upper left corner when activated).

To stop the alarm, use any of the three buttons.

Technical

Letter

BOOK NO. 529

ANALOG/DIGITAL – T200

Page 1 of 2

HOW TO SELECT 

THE FUNCTIONS