Bumbleride car seat cover Product Manual - page 2
1) Begin by removing the existing canopy
from the infant seat. Separate the canopy’s
frame to slide the canopy fabric off. Each
brand of infant seat is slightly different.
1) Commencer en enlevant le baldaquin de
la place petite. Séparer le cadre de baldaquin
et enlever le tissu. Chaque place petite est
différente.
2) Thread the canopy frame through the
Bumbleride canopy fabric and secure the
frame. Set the canopy aside to be attached
later.
2) Pousser le cadre par le tissu de Bumbleride.
Pousser le baldaquin de côté pour utiliser
plus tard.
3) Look on the back side of the infant seat
and detach the harness belts. You will
need to remove these before attaching the
infant seat cover.
3) Compter sur le côté arrière de la place
petite et enlever l'harnais. Enlever l'harnais
avant d'attacher.
4) Attach the infant seat cover and thread
the harness belts through the seat again.
Attach the canopy.
4) Attacher la couverture de la place petite
et enfiler l'harnais sur la place. Attacher le
baldaquin.
WARNING: Please review your infant seat
instructions and warnings before removing
harness.
AVERTISSEMENT: S'il vous plaît réexaminer les
instructions et les avertissements avant
d'enlever l'harnais.
Operating Instructions
Instructions d'opération
1
2
3
4