Bumbleride Queen B Assembly & Maintenance Manual - page 6
OPERATION
MAINTENANCE
5 | Bumbleride 1-800-530-3930 info@bumbleride.com www.bumbleride.com
Assembling wheels:
Attach the wheels by squeezing the hubcap release button and sliding wheel onto the axle as far as it
can go [1]. Release button so wheel clicks into position and pull on the wheel to ensure it is securely
attached to the axle. Locate the pull lever on the front left side of the pram to lock the steerable wheels.
Push the lever down and move to the desired setting. Release lever to click into place [2].
To remove wheels, squeeze hubcap release button and slide wheel off of axle.
WARNING: Pull on each wheel to ensure that it is locked before use.
Operating brake:
Apply the brakes by pushing down on the brake bar with your foot (3). Make sure that the brake bar is
securely locked into place. Ensure that the brake bar is engaged when parking the Queen B. Release
the brake bar by lifting with your foot.
1
3
2