Bunker Hill Security 61805 Owner's Manual & Safety Instructions - Instructions
Page 3
For technical questions, please call 1-888-866-5797.
Item 61805
Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this document including all text under subheadings therein
before set up or use of this product.
1. Remove the screw at the bottom of
the lens to open the housing.
2. Slide the battery compartment
out of the housing.
3. Remove the battery cover.
4. Install 2 fresh “
AAA” batteries in proper
polarity. Do not install batteries of different
types, charge levels, or capacities together.
5. Replace the battery cover.
6. Insert the battery compartment
into the housing.
7. Replace the lens, and install the
screw to secure it in place.
8. Verify that installation surface
has no hidden utility lines before
drilling or driving screws.
9. Insert “wire” through center hole in
bracket, so that it is held in place,
but the end is not showing.
10. Hold camera in position and mount using
3 screws of appropriate size and type.
Record Serial Number Here:
Note: If product has no serial number, record
month and year of purchase instead.
Note: Replacement parts are not
available for this product.