Bunn DUAL Installation & Operating Manual

Summary of DUAL

  • Page 1

    C a u t i o n : w a r m e r s a n d s u r fa c e s a r e h o t ca utio n discard de ca nt er if: . C ra ck ed . Sc ra tc he d . B oile d d ry . H ea te d wh en em pty . U se d o n h igh fl am e . Or ex pos ed el ec tr ic e le me nt s fa ilu re to comp ly ris ks in ju ry pn : 65 8 198 5 b un n-o -ma ...

  • Page 2

    Page 2 27040 030912 bunn-o-matic commercial product warranty bunn-o-matic corp. (“bunn”) warrants equipment manufactured by it as follows: 1) airpots, thermal carafes, decanters, gpr servers, iced tea/coffee dispensers, mcp/mca pod brewers thermal servers and thermofresh servers (mechanical and digi...

  • Page 3: Main On/off

    Page 3 user notices the notices on this brewer should be kept in good condition. Replace unreadable or damaged labels. As directed in the international plumbing code of the international code council and the food code manual of the food and drug administration (fda), this equipment must be installed...

  • Page 4

    Page 4 caution – improper electrical installation will damage electronic components. 1. An electrician must provide electrical service as specified. 2. Using a voltmeter, check the voltage and color coding of each conductor at the electrical source. 3. Remove the front panel beneath the sprayheads. ...

  • Page 5

    Page 5 27040 111808 venter and dispenser. Installing the shock arrestor as close to dispenser as possible will provide best results. 1. Flush the water line and securely attach it to the flare fitting on the strainer/flow control located on bottom of brewer. 2. Turn on the water supply. Ce requireme...

  • Page 6

    Page 6 27040 011110 note: to increase the water bypass turn the needle valve counterclockwise, to decrease the water bypass turn the needle valve clockwise. An adjustment of the needle valve will require a timer adjustment for volume. To determine how many turns must be performed to achieve the desi...

  • Page 7

    Page 7 to be removed from the total brew time period; then immediately press and hold down the start or brew switch until three clicks are heard. Release the switch. (failure to release the switch within two seconds after the third click causes the volume setting to be aborted and previous volume se...