1. DL manuals
  2. Bunn
  3. Beverage Dispenser
  4. ULTRA 2 Slush Puppie
  5. Quick Reference Manual

Bunn ULTRA 2 Slush Puppie Quick Reference Manual

Summary of ULTRA 2 Slush Puppie

  • Page 1

    Quick reference guide for operation and maintenance model: bunn ultra 2 equipment setup guide • unbox bunn ultra2 and place on counter top. • ensure 6” of space around machine for ventilation. • plug into dedicated 110v circuit. • do not use an extension cord. (see “initial setup” of the bunn instal...

  • Page 2

    Quick reference guide for operation and maintenance model: bunn ultra 2 signage setup guide install the slush puppie graphic to the bunn ultra. Click the image to watch the instructional video. (your bunn ultra may already have the slush puppie decal applied.) 1 2 3 4 hang the slush puppie mobile ab...

  • Page 3

    Quick reference guide for operation and maintenance model: bunn ultra 2 basic operations and settings pour pre-mixed product into hopper and install lids. Press the on / off button to power unit on. Press the auger button to activate the auger. Press and release the temperature button to cycle throu...

  • Page 4

    Quick reference guide for operation and maintenance 1 5 8 2 6 9 3 7 4 model: bunn ultra 2 10 cleaning 11 12 this guide is for quick reference only and is not intended to replace the information in the operation manual or local health regulations! Turn cooling to off selection. Empty all product from...

  • Page 5

    Quick reference guide for operation and maintenance model: bunn ultra 2 assembly 8 9 11 12 1 2 3 4 5 6 7 10 replace the auger nose bushing inside the front of the hopper. Install the hopper seal over the flange at the rear of the cooling drum as shown. Align the auger shafts with the augers. Push th...

  • Page 6

    Problem reason solution notes lid lights flash on and off beverage levels low refill beverage hopper with premixed product product not freezing ambient temperature too high be sure there is a minimum of 6 inches of air space at the top, back and sides of the dispenser. Maximum ambient temperatures n...