1 user manual
1 power adapter DC 12V with lock
1 RS-232 1.8M cable (DB-9 Male to Female)
1 RS-232 control software CD
2 rack rails, 6 screws for MRM-701 only
Any thing missed, please contact with your vendor.
The MRM-701 is a multi-format to HDMI convertor for
digital and analog video input. It combines five
independent switchers in a single compact enclosure: 3x1
HDMI with embedded audio, 1x VGA, 1x YPbPr video, 1x
CVBS, 1x S-Video, and 4x1 analog stereo audio. The
MRM-701 features three selectable switching modes,
including the ability to route all and HDMI sources to the
display using a single HDMI cable. Continuous EDID
communications between the HDMI and VGA sources and
the display device ensures the reliable display of video.
HDMI inputs and outputs are HDCP compliant, ensuring
display of content protected media. The MRM-701 is ideal
for use in single-display applications that require a hybrid
switcher for integration of digital and analog video sources
and associated audio signals.
Deep Color video up to 12-bits, [email protected] (when
HDMI input to HDMI output)
Compliant with HDMI 1.3a and DVI 1.0 standards
Fully HDCP compliant
Video Inputs: 3 x HDMI, 1 x VGA, 1x YPbPr, 1 x
CVBS, 1 x S-Video
Audio Inputs: 3 x HDMI, 3 x 2-chn RCA(work with
YPbPr/ CVBS/ S-Video), 1*x3.5mm (work with VGA)
Video Output: 1 x HDMI
Audio Output: 1x 2-chn analog RCA
IR Remote controller for operation.
Computer can be used RS 232 to control the
1U rack design
HDMI Input Connector
VGA Input Connector
YPbPr Input Connector
CVBS Input Connector
S-Video Input Connector
HDMI Output Connector
Remote control port
RS232, 9600, 8 data bit,
no parity, 1 stop bit
Power Adapter (Min.)
DC 12V with lock
1. Input port selection switch
Press the switch to access the selected video source.
2. Port LEDs
LED lights up when the input port has been
3. IR receiver
Take aim at IR receiver with remote controller.
1. Power Supply
Plug the power adapter.
2. RS232 port
Use a 9-pin RS-232 cable to connect both computer
serial port and MRM-701’s RS-232 port, refer to”
Matrix Application Software“
3. Video Input port
3 x HDMI, 1 x VGA, 1x YPbPr, 1 x CVBS, 1 x S-Video
4. HDMI out port
5. Audio input port
Work with input port: VGA, YPbPr, CVBS, S-Video
Before the installation, making sure the MRM-701 and
monitor are turning off.
1. Making sure all equipments are turned off.
2. Plug the monitor cable into the HDMI OUT port
3. Plug the extension cables from video source device
(DVD player, PC, Digital camera) into the Video IN port
4. Plug the power adapter into the wall socket.
5. Connect the power adapter with the HDMI selector.
6. Turn on the monitor first.
7. Turn on the DVD player/TV receiver.
1. Port selection
Press the button of “port selection switch” for
accessing the wanted DVD player/TV receiver.
The selected corresponding port will light on for the
LEDs which indicating the port is actived.