1. DL manuals
  2. C-Com
  3. DVR
  4. IPAM-1600s
  5. User Manual

C-Com IPAM-1600s User Manual

Manual is about: C-Com IPAM-1600s Standalone 16 Ports’ IP DSLAM

Summary of IPAM-1600s

  • Page 1

    I i p p a a m m - - 1 1 6 6 0 0 0 0 s s - standalone 16 ports’ ip dslam user’s guide document no. Um1600-2-a 2002.

  • Page 2

    Disclaimer the copyright of this user manual is hold by c-com corporation and protected by taiwan’s intellectual property. You may not transmit, copy, modify, or translate this manual, or reduce it or any part of it to any machine-readable form, without the express permission of the copyright holder...

  • Page 3: Contents

    Content um1600-2-a 2002 i contents contents ............................................................................................... I list of figures .................................................................................... Vi list of tables ..........................................

  • Page 4

    Content um1600-2-a 2002 ii parts number explanation................................................................................................ 25 hardware installation ........................................................................................................ 25 safety instruction ...

  • Page 5

    Content um1600-2-a 2002 iii management configuration .............................................................................................. 53 configuring snmp access parameters and trap ips {snmp} ........................................ 53 configuring management ip {management ip} ...........

  • Page 6

    Content um1600-2-a 2002 iv modifying dsl profile and alarm profile ....................................................................... 82 deleting a dsl profile and alarm profile ....................................................................... 84 displying a dsl profile and alarm profile ...

  • Page 7

    Content um1600-2-a 2002 v starting the system........................................................................................................... 117 logging into the system................................................................................................... 117 terminating the ...

  • Page 8: List of Figures

    Content um1600-2-a 2002 vi list of figures fig 0-1 pppoe application in traditional atm-based adsl network .......................... 11 fig 0-2 pppoe application in ipam-1600s with ethernet-all-the-way network.......... 12 fig 1-1 ipam-1600s front view .................................................

  • Page 9: List of Tables

    Content um1600-2-a 2002 vii list of tables table 1-1 ipam-1600s led description....................................................................... 16 table 3-1 physical layer info field definitions............................................................... 55 table 3-2 channel layer informat...

  • Page 10

    Introduction um1600-2-a 2002 viii table a-4 uplink and downlink port (xn) pin assignment ........................................ 138 table a-5 8 ports adsl line connector pin assignment ....................................... 138 table a-6 8 ports pots splitter phone connector pin assignment .........

  • Page 11: About This Guide

    Introduction um1600-2-a 2002 9 about this guide audience this book is intended for anyone who installs, manages, and configures the ipam-1600s, one product of c-com ipam-1600s series, via cid/rs-232 or telnet/ethernet cli command interface. The ipam-1600s is a standalone ip-based dslam which can con...

  • Page 12: Document Conventions

    Introduction um1600-2-a 2002 10 4 system administration with cli provides all the instructions and procedures necessary for you to administer your ipam-1600s with cli interface. 5 ems-netbailff provides the event and status of ipam-1600s viewing with ems. 6 configuration back up and restore provides...

  • Page 13

    Introduction um1600-2-a 2002 11 what’s the difference between atm based dslam and ip based dslam-ipam-1600s? Fig 0-1 & fig 0-2 display the differences between traditional atm-based dslam and ipam-1600s in pppoe application sample. Fig 0-1 pppoe application in traditional atm-based adsl network as fi...

  • Page 14

    Introduction um1600-2-a 2002 12 fig 0-2 pppoe application in ipam-1600s with ethernet-all-the-way network in addition to traditional atm-based adsl network. As fig 0-2 displays, the user application information is still encapsulated by adsl cpe into atm cells in pre-defined vc (virtual channel, pvc)...

  • Page 15: Introduction

    Introduction um1600-2-a 2002 13 introduction general this chapter will help you understand the function and application of your smarddslam. It covers ipam-1600s overview this section describes the overview of your ipam-1600s. The ipam-1600s is cost effective solution for you to complete immediate im...

  • Page 16: Ipam-1600S Overview

    Introduction um1600-2-a 2002 14 ipam-1600s overview today’s bandwidth-hungry application such as internet access, remote lan access, teleconferencing, workgroup and data sharing, telecommuting and numerous varieties of digital video services are driving today’s demand for high-speed data network acc...

  • Page 17

    Introduction um1600-2-a 2002 15 fig 1-1 ipam-1600s front view as fig 1-1 displays, in the front view of ipam-1600s, there are several leds to indicate current system and link status and one 10/100 mega ethernet interface for uplink. Instead of selecting or for centralized management purpose like ipa...

  • Page 18

    Introduction um1600-2-a 2002 16 fig 1-2 displays the led identification of ipam-1600s, and table-1 describes its color definition and status description. Fig 1-2 ipam-1600s led identification table 1-1 ipam-1600s led description color description power green lit when power on maint yellow lit when m...

  • Page 19

    Introduction um1600-2-a 2002 17 fig 1-3 ipam-1600s rear view as fig 1-3 displays, in the rear-panel, there is one power adaptor, both -42v ~ -56v dc or 90v ~ 240v ac power module can be selected. There are two dsl module slots, each module provides 8-port with built-in pots-splitter adsl module, tot...

  • Page 20: Ipam-1600S Application

    Introduction um1600-2-a 2002 18 ipam-1600s application mtu/mdu application as fig 1-4 displays, because of the growth of internet population, band- width becomes more and more important for people that live or work in the buildings. Ipam-1600s enables people inside the buildings to share the expensi...

  • Page 21

    Introduction um1600-2-a 2002 19 fig 1-5 ipam-1600s ethernet-all-the-way application.

  • Page 22: Ipam-1600S Features

    Introduction um1600-2-a 2002 20 ipam-1600s features vlan support the ipam-1600s supports mapping of ethernet-vlan to atm-pvc feature for security concern. Compact design for limited space the ipam-1600s occupies 1.5 u of standard telco rack space. Its compactness is perfect for collocation and basem...

  • Page 23

    Introduction um1600-2-a 2002 21 ipam-1600s specifications ipam-1600s interface: adsl module: 2 modules, each support 8 adsl links with built-in pots splitter lan interface: 10/100 tx ethernet power supply: built-in –48v dc or 90v-240v ac mechanical: dimension: 429mm(w) x 300mm(d) x 66mm(h) weight: 1...

  • Page 24

    Introduction um1600-2-a 2002 22 mechanical: dimension: 429mm(w) x 180mm(d) x 44mm(h) weight: 4 lb operating position: horizontal environment: operating temperature: 0℃ - +50℃ storage temperature: -30℃- +70℃ operating relative humidity (non-condensing): 0%-90% storage relative humidity (non-condensin...

  • Page 25: Getting Started

    Getting started um1600-2-a 2002 23 getting started 2 general this chapter provides the installation instruction for the hardware installation and system configuration of your ipam-1600s so that you can start up quickly. It includes the following sections: unpacking your ipam-1600s this section descr...

  • Page 26: Unpacking Your Ipam-1600S

    Getting started um1600-2-a 2002 24 unpacking your ipam-1600s this section describes how to unpack your ipam-1600s. Unpacking your ipam-1600s for a box of ipam-1600s, there may contains the following materials: fig 2-1 ipam-1600s packing content ipam-1600s box (as fig 2-1 displays) ipam-1600s with tw...

  • Page 27: Hardware Installation

    Getting started um1600-2-a 2002 25 parts number explanation parts number explanation all the part number explanation listed as follows tries to help users to identify the part number by themselves. Ipam-1600 am16-xxxxxx-x-xxx = standard ipam-1600 box xxxxxx = a16ga6: 16 ports adsl dslam, annex a, tw...

  • Page 28

    Getting started um1600-2-a 2002 26 safety instruction the following is the safety instructions for smartdslam before installation: 1. Read and follows all warning notices and instructions of this user manual. 2. The maximum recommended operating temperature for the smartdslam is 50ºc. Care must be t...

  • Page 29

    Getting started um1600-2-a 2002 27 report a gas leak in the vicinity of the leak. Power connection fig 2-2 dc & ac power connector the ipam-1600s provide both ac and dc power model (as fig 2-3 displays). Use the following procedures to connect the office power to the ipam-1600s system dc power (1) p...

  • Page 30

    Getting started um1600-2-a 2002 28 fig 2-3 ipam-1600s rear view & adsl transceiver module ipam-1600s pots and adsl loop connection as fig 2-4 displays, there are two 50-pin female centronic connectors for each ipam-1600s adsl transceiver module. One of the connectors marked “line” connects the adsl+...

  • Page 31

    Getting started um1600-2-a 2002 29 for easy installation & system verification, as fig 2-5 displays, an optional mdf module can be ordered if needed. Cid connection connect the cable between your pc and cid port on the front panel of the ipam-1600s. Please refer to the appendix-a for pin assignment..

  • Page 32

    Getting started um1600-2-a 2002 30 step 3 step 5 step 4 step 1 step 2 step 5 installation with cpe and b-ras ipam-1600s rear panel connection cpe ipam-1600s rearview ipam-1600s rear view fig 2-6 ipam-1600s rear panel connection with your cpe ipam-1600s front panel connection fig 2-7 ipam-1600s front...

  • Page 33

    Getting started um1600-2-a 2002 31 step 1 connecting line connector to the adsl line patch panel with dsl patch cord step 2 connecting cpe from patch panel step 3 connecting phone connector to the telephone patch panel with dsl patch cord step 4 connecting to the telephone jack step 5 connecting the...

  • Page 34

    Getting started um1600-2-a 2002 32 ways of management connection this section will tell you how to connect and manage your ipam-1600s through emweb, cli and ems. Embedded web interface(emweb) the embedded web interface (emweb), comprised of html files, is more user- friendly than cli for your config...

  • Page 35

    Getting started um1600-2-a 2002 33 console port settings. Bits per second 9600 data bits 8 parity none stop bits 1 flow control none 3. Log in as usual. Element management system, netbailiff ipam-1600s supports the element management system to provide the information of current alarms and events of ...

  • Page 36

    System administration with emweb um1600-2-a 2002 34 system administration with emweb 3 this chapter provides all the instruction and procedure necessary for you to administer your ipam-1600s with emweb interface. Log in with embedded web interface this section describes how to log into embedded web ...

  • Page 37: Embedded Web Interface Menu

    System administration with emweb um1600-2-a 2002 35 embedded web interface menu this section describes the overview of the embedded web interface menu, emweb. After your successfully logging into the emweb, the screen will appears as follows: default setting display the information of default (facto...

  • Page 38

    System administration with emweb um1600-2-a 2002 36 system ip / location: allow you to configure the ip address and location of your ipam-1600s. See page 43. System date and time: allow you to configure the date and time of your ipam-1600s. See page 44. Changing password: allow you to change your pa...

  • Page 39

    System administration with emweb um1600-2-a 2002 37 channel layer info: allow you to view the performance information on channel layer by specifying the definite unit. See page 56. Current phy-layer pm: allow you to view the physical layer performance collected within current 15 minutes and a day du...

  • Page 40

    System administration with emweb um1600-2-a 2002 38 default (factory) configuration settings {default setting} this section describes how to get the information of the default setting of your ipam-1600s. 1. Click on “default setting” from the ipam-1600s main menu. The default setting screen appears ...

  • Page 41

    System administration with emweb um1600-2-a 2002 39 displaying the system information of your ipam-1600s {system information} this section describes how to get the information of your ipam-1600s. 1. Click on “system information” from the smartdslam main menu. The system information screen appears as...

  • Page 42

    System administration with emweb um1600-2-a 2002 40 save your configuration to flash {save to flash} this section describes how to save the configuration you have configured to flash. This function will be needed whenever you want to restart your ipam-1600s with the updated configuration. 1. Click o...

  • Page 43

    System administration with emweb um1600-2-a 2002 41 displaying current event {current event } this section describes how to view the current alarm and event status. 1. Click on “current event” from the smartdslam main menu. The current event screen appears as follows: current event no date time sour...

  • Page 44: Configuring Ipam-1600S

    System administration with emweb um1600-2-a 2002 42 configuring ipam-1600s this section describes how to configure your ipam-1600s by selecting system from emweb menu. This section will cover all the function from system menu. It includes: configuring port filtering {set port filter} allow you to co...

  • Page 45

    System administration with emweb um1600-2-a 2002 43 configuring ip and location {system ip / location} allow you to configure the system ip address and location. 1. Click on “system ip / location” from the system menu. The system ip / location screen appears with the default setting and can be confi...

  • Page 46

    System administration with emweb um1600-2-a 2002 44 configuring date and time {system date and time} allow you to configure the date and time of the system. 1. Click on “system date and time” from the system menu. The system date and time screen appears with the default setting and can be configured...

  • Page 47

    System administration with emweb um1600-2-a 2002 45 changing your password {changing password} allow you to change your password. 1. Click on “changing password” from the system menu. The changing password screen appears with your user name and your password can be changed as follows: 2. Enter your ...

  • Page 48: Dsl Line Configuration

    System administration with emweb um1600-2-a 2002 46 dsl line configuration this section covers how to create, display, modify, or delete the line profile and alarm profile by selecting dsl line configuration from emweb menu. This section will cover all the function from dsl line configuration menu. ...

  • Page 49

    System administration with emweb um1600-2-a 2002 47 note: (1) if you configure “transmit rate adaptation” as “fixed”, it is recommended to configure the value of “minimum transmit rate” and “maximum transmit rate” on co side or rt side the same. However, the value of co side and rt side may not be t...

  • Page 50: Port Configuration

    System administration with emweb um1600-2-a 2002 48 displaying and modifying a line profile {current line profile} allow you to view, modify, or delete existing adsl line profiles. 1. Click on “current line profile” of the dsl profile configuration menu. The current line profile screen appears as fo...

  • Page 51

    System administration with emweb um1600-2-a 2002 49 dsl port configuration{dsl port configuration} allow you to display, modify and delete the status of the port. It also provides the configuration of enabling or disabling a port and attaching the specific line profile and alarm profile to a port. T...

  • Page 52

    System administration with emweb um1600-2-a 2002 50 pvc configuration{pvc configuration} allow you to configure pvc (permanent virtual connection) and vid (vlan id) on a port and setting the priority. It also provides the modification and delete function. The procedures are as follows: 1. Click on “...

  • Page 53

    System administration with emweb um1600-2-a 2002 51 4. Configure the vci, says 50 5. Configure the administration status of pvc “up” or “down”, says “up. 6. Configure the vid of the port. Here in example, “4002” is configured. 7. Configure the priority of pvc, says 7. The priority of 0 to 7 is from ...

  • Page 54

    System administration with emweb um1600-2-a 2002 52 subscriber name as you want, says pantagon. 4. Configure the telephone number of subscriber, says 42361258 5. Write note for your reference if you need. 6. Click on the apply button to submit your changes, or click on the cancel button if you want ...

  • Page 55: Management Configuration

    System administration with emweb um1600-2-a 2002 53 management configuration this section covers how to configure snmp access parameters and management ip by selecting management from emweb menu. This section will cover all the function from management menu. It includes: configuring snmp access para...

  • Page 56

    System administration with emweb um1600-2-a 2002 54 configuring management ip {management ip} allow you to configure the management ips so that only with those configured management ips can access to your ipam-1600s remotely. The procedures are as follows: 1. Click on “management ip” of the manageme...

  • Page 57: Performance Monitor

    System administration with emweb um1600-2-a 2002 55 performance monitor this section covers performance monitor by selecting dsl port performance from emweb menu. It includes: adsl physical layer pm {physical layer info} allow you to view the performance information on physical layer by specifying t...

  • Page 58

    System administration with emweb um1600-2-a 2002 56 lpr: atu-r failure due to loss of signal output power total output power transmitted by atu. (dbm) attainable rate the maximum currently attainable data rate by the atu. (kbps) adsl channel layer pm {channel layer info} allow you to view the perfor...

  • Page 59

    System administration with emweb um1600-2-a 2002 57 adsl physical layer pm within current 15 minutes and a day duration {current phy-layer pm} allow you to view the physical layer performance collected within current 15 minutes and a day duration. The procedures are as follows: 1. Click on “current ...

  • Page 60

    System administration with emweb um1600-2-a 2002 58 field definition current 15-min lprs number of seconds in the current 15-minute interval during which lpr was detected. Current 15-min ess number of error seconds in the current 15-minute interval. Current 15-min inits number of inits in the curren...

  • Page 61

    System administration with emweb um1600-2-a 2002 59 adsl channel layer pm within current 15 minutes and a day duration {current channel-layer pm} allow you to view the channel layer performance collected within current 15 minutes and 1-day duration. 1. Click on “current channel-layer pm” of the dsl ...

  • Page 62

    System administration with emweb um1600-2-a 2002 60 field definition elapsed start of the current 15-minute interval. Current 15-min received blocks number of blocks of data received during the current 15-minute interval. Current 15-min transmitted blocks number of blocks of data transmitted during ...

  • Page 63

    System administration with emweb um1600-2-a 2002 61 table 3-5 15 min phy-layer pm information field definition field definition co down stream rt up stream lofs counts of lof since agent reset within previous 15-min interval. Loss counts of los since agent reset within previous 15-min interval. Lols...

  • Page 64

    System administration with emweb um1600-2-a 2002 62 interval. Inits counts of adsl line initialization attempts since agent reset, including both successful and failed attempts within previous 1 day interval.(but only at atu-c side) adsl channel layer pm within previous 15 minutes duration {15 min c...

  • Page 65

    System administration with emweb um1600-2-a 2002 63 previous 15min interval. Transmitted the total number of blocks of data transmitted during the previous 15min interval. Corrected number of corrected blocks of data transmitted during the previous 15min interval. Uncorrected number of uncorrected b...

  • Page 66: Command Structure

    System administration with cli um1600-2-a 2002 64 system administration with cli 4 command line interface (cli) is the primary user interface to administrate the system. Cli can be accessed either from the cid port or telnet session. All cli commands are simple strings designed for the administrator...

  • Page 67

    System administration with cli um1600-2-a 2002 65 table 4-1 cli command - action list description show used to view information of the selected identifier and parameters. Add used to add configuration of objects according to the identifier and parameters. Parameters are used for selecting specific f...

  • Page 68

    System administration with cli um1600-2-a 2002 66 description time allow you to configure the current system date and time. Trapdest allow you to configure the trap destination. Subscriber allow you to configure the basic information of the subscriber of each adsl port. User allow you to configure t...

  • Page 69

    System administration with cli um1600-2-a 2002 67 description add alarmprof setting alarm profile name. (alarmprof-atuc) allow you to set the threshold value of co side alarms. (alarmprof-atur) allow you to set the threshold value of rt side alarms. Add connection [vid] [priority] allow you to creat...

  • Page 70

    System administration with cli um1600-2-a 2002 68 description (alarmprof-atur) modify the threshold value of rt side alarms config connection [vid] [priority] modify pvc (vpi/vci) and vlan id by specifying a port. Config lineprof modify existing line profile. (lineprof-atuc) modify the configuration...

  • Page 71

    System administration with cli um1600-2-a 2002 69 description delete connection no.> delete pvc by selecting (vpi/vci) of ipam-1600s port no. Delete event none delete all event information delete lineprof delete adsl line profile by selecting profile name. Delete manip delete the specific ip. Delete...

  • Page 72: General Configuration

    System administration with cli um1600-2-a 2002 70 general configuration help command “help” command can be used to get help specific to a command mode by entering help or help . Command: help history command “history” command is used for to trace the command all users have entered. Command: history ...

  • Page 73: Event Viewing and Deleting

    System administration with cli um1600-2-a 2002 71 event viewing and deleting displaying the current event describes how to display the current event of system. Command: show event example: this example shows how to display the current status of system. Smartdslam# show event ------------------------...

  • Page 74

    System administration with cli um1600-2-a 2002 72 example: this example shows how to reset the specific unit 1/ port 8. Smartdslam# reset port 8 yes or no ? Restart the ipam-1600s describes how to restart the system without turning on/off power. Command: restart example: this example shows how to re...

  • Page 75: Configuring Your Ipam-1600S

    System administration with cli um1600-2-a 2002 73 parameter type description enable / disable enable / disable upgrade mode example: this example shows how to enable download without in-band management channel. Smartdslam# upgrade enable yes or no ? Y system is in the “upgrade” mode now. You could s...

  • Page 76

    System administration with cli um1600-2-a 2002 74 hareware version: ver 1.0 software version: ver 1.0 serial number: 52118581 description: none table 4-6 sysinfo field definition field definition system name alias name of ipam-1600s location location of system contact contact person for service and ...

  • Page 77

    System administration with cli um1600-2-a 2002 75 yes or no ? Port-filtering configuration displaying port-filtering describes how to display the status of port-based vlan. Command: show portfilter example: this example shows how to view the status of port-based vlan smartdslam# show portfilter port...

  • Page 78

    System administration with cli um1600-2-a 2002 76 yes or no ? This example shows how to disable the portfilter and allow all adsl port to communicate with each other and also with the uplink ethernet port. Smartdslam# config portfilter disable yes or no ? Note: the default setting is “enable” ip con...

  • Page 79

    System administration with cli um1600-2-a 2002 77 example: this example shows how to modify the system ip as 192.168.10.100, submask as 255.255.255.0 and gateway as 192.168.10.1. Smartdslam# config sysip 192.168.10.100 255.255.255.0 192.168.10.1 : 192.168.10.100 : 255.255.255.0 : 192.168.10.1 yes or...

  • Page 80

    System administration with cli um1600-2-a 2002 78 smartdslam# config time 2001/07/13 20:25:30 date: 2001/07/13 time: 20:25:30 yes or no ? Changing the password this section describes how to change own password regardless of user’s privilege. Command: config password example: this example shows how t...

  • Page 81: Configuring Dsl

    System administration with cli um1600-2-a 2002 79 configuring dsl creating line profile and alarm profile creating dsl profile describes how to create a dsl profile. Command: add lineprof argument list: parameter type parameter data-type and field description lineprof name string, the name of adsl l...

  • Page 82

    System administration with cli um1600-2-a 2002 80 smartdslam# add lineprof service512k64k (lineprof-atuc)# 2 2 7 32 512 8 (lineprof-atur)# 2 2 7 32 64 8 adsl line profile “service512k64k” content: atu-c: rate mode: adaptatstartup linetype: interleaved targetsnrmargin: 7 mintxrate: 32 maxtxrate: 512 ...

  • Page 83

    System administration with cli um1600-2-a 2002 81 atu-r: 1. Rate mode: adaptatstartup 2. Ratechanratio: interleaved 3. Targetsnrmargin: 6.0 4. Mintxrate: 32 5. Maxtxrate: 1024 6. Maxinterleavedelay:16 creating alarm profile this section describes how to create an alarm profile. Command: add alarmpro...

  • Page 84

    System administration with cli um1600-2-a 2002 82 smartdslam# add alarmprof test (alarmprof-atuc)# 30 10 50 5 4 enable (alarmprof-atur)# 30 2 2 5 adsl alarm profile “test” content: atu-c: thresh15minlofs: 30 thresh15minloss: 10 thresh15minlols: 50 thresh15minlprs: 5 thresh15miness: 4 initfailuretrap...

  • Page 85

    System administration with cli um1600-2-a 2002 83 named service512k64k. Smartdslam# config lineprof service512k64k (lineprof-atuc)# 2 2 6 128 512 1 (lineprof-atur)# 2 2 6 32 64 1 adsl line profile “service512k64k” content: atu-c: rate mode: adaptatstartup linetype: interleaved targetsnrmargin: 6 min...

  • Page 86

    System administration with cli um1600-2-a 2002 84 deleting a dsl profile and alarm profile deleting dsl profile describes how to delete a profile but you cannot delete the default profile. Command: delete lineprof example: this example shows how to delete existing line profile service512k64k. Smartd...

  • Page 87

    System administration with cli um1600-2-a 2002 85 example:this example shows how to display default line profile. Smartdslam# show lineprof default atu-c: 1. Ratemode: adaptatstartup 2. Linetype: interleaved 3. Targetsnrmargin: 6.0 4. Mintxrate: 32 5. Maxtxrate: 8064 6. Maxinterleavedelay: 16 atu-r:...

  • Page 88

    System administration with cli um1600-2-a 2002 86 example: this example shows how to display the default alarm profile. Smartdslam# show alarmprof default atu-c: 1. Thresh15minlofs: 0 2. Thresh15minloss: 0 3. Thresh15minlols: 0 4. Thresh15minlprs: 0 5. Thresh15miness: 0 6. Initfailuretrapenable: ena...

  • Page 90

    System administration with cli um1600-2-a 2002 88 displaying the current status and information of adsl line displaying the current status of line describes how to show the administration, operating, alarm and trap status. Command: show port argument list: parameter description all show all informat...

  • Page 91

    System administration with cli um1600-2-a 2002 89 compliance, channel mode and which line profile and alarm profile have attached at the specific adsl line. Command: show adslline argument list: parameter description all show all information. Port no. Port id example: this example shows how to displ...

  • Page 92

    System administration with cli um1600-2-a 2002 90 admin status up/down used to up/down connection. Vid (optional) 2 ~ 4094 optional vlan id, no element represents the connection is without vlan tag. Priority (optional) 0 ~ 7 (max:7 , min:0) optional connection priority. No vlan tag, no priority. Exa...

  • Page 93

    System administration with cli um1600-2-a 2002 91 table 4-14 ways of pvc configuration either with vlan tag or without vlan tag port 1 st pvc 2 nd pvc with vlan tag with vlan tag without vlan tag the same port without vlan tag with vlan tag modifying pvc describes how to modify the virtual connectio...

  • Page 94

    System administration with cli um1600-2-a 2002 92 deleting pvc describes how to delete virtual connection you set, including the default setting. Command: delete connection argument list: parameter type parameter data-type and field description port no. (1 ~ 16) indicated ipam-1600s port no. Pvc (0 ...

  • Page 95

    System administration with cli um1600-2-a 2002 93 table 4-15 “show connection” field definition items description port id the specific ipam-1600s port no. Pvc vpi/vci vid vid. Priority the priority of this connection. (max: 7 / min:0) admin status the admin status of each connection (up/down). Opera...

  • Page 96

    System administration with cli um1600-2-a 2002 94 subscriber configuration displaying the information of subscriber describes how to view the information of subscriber of each port. Command: show subscriber argument list: parameter description all show all information. Port no. Port id example: this...

  • Page 97

    System administration with cli um1600-2-a 2002 95 example: this example shows how to modify the subscriber description of port 7. Smartdslam# config subscriber 7 (subscriber) help (subscriber) adms 2148485965 test_again. Adsl port “1/7” subscriber information: subscriber name: adms telephone number:...

  • Page 98: Management Configuration

    System administration with cli um1600-2-a 2002 96 management configuration configuring snmp access parameters displaying snmp describes how to display the information of snmp. Command: show snmp example: this example shows how to display the information of snmp. Smartdslam# show snmp 1.Vid: 4094 2.C...

  • Page 99

    System administration with cli um1600-2-a 2002 97 this example shows how to modify snmp with the configuration of community string - “private” and vid – “4025” smartdslam# config snmp public 4025 vid: 4025 community: public yes or no ? Configuring trap ip creating trap ip describes how to create the...

  • Page 100

    System administration with cli um1600-2-a 2002 98 deleting snmp trap describes how to delete a specific trap ip. Command: delete trapdest example: this example shows how to delete the trap ip 192.168.0.100. Smartdslam# delete trapdest 192.168.0.100 yes or no ? Configuring management ip creating mana...

  • Page 101

    System administration with cli um1600-2-a 2002 99 command: show manip example: this example shows how to display existing management ip. Smartdslam# show manip ip address mask ------------------------------------------------------------------ 192.168.0.1 255.255.255.128 192.168.100.1 255.255.255.0 2...

  • Page 104

    System administration with cli um1600-2-a 2002 102 current 15 minutes and 1-day duration. Smartdslam# show adslphperf 8 r atu-r 1. Lofs: 0 2. Loss: 0 3. Lprs:0 4. Ess: 2 5. Current 15-min time elapsed: 105 6. Current 15-min lofs: 0 7. Current 15-min loss: 0 8. Current 15-min lprs: 0 9. Current 15-mi...

  • Page 105

    System administration with cli um1600-2-a 2002 103 field definition current 1-day loss number of seconds in the current 1 day interval during which los was detected. Current 1-day lols number of seconds in the current 1 day interval during which lol was detected. Current 1-day lprs number of seconds...

  • Page 106

    System administration with cli um1600-2-a 2002 104 17. Current 1-day corrected blocks: 3566 18. Current 1-day uncorrected blocks: 2100 table 4-24 “show adslchperf” field definition field definition in octets the total number of bytes received since the last agent reset. Out octets the total number o...

  • Page 107

    System administration with cli um1600-2-a 2002 105 displaying physical performance statistics during previous 15 minutes or 1 day duration describes how to display the physical performance of a port or all port on co side, remote side or both sides during previous 15 minutes or 1-day duration. For 1...

  • Page 108

    System administration with cli um1600-2-a 2002 106 displaying channel performance statistics during previous 15 minutes or 1 day duration describes how to display the channel performance of a port or all port on co side, remote side, or both sides during previous 15 minutes or 1day duration. For 15 ...

  • Page 109: Configuring User Account

    System administration with cli um1600-2-a 2002 107 configuring user account creating user account describes how to create a user account and setting his privilege. Command: add user argument list: parameter type parameter data-type and field description user name string, user name (login account) ad...

  • Page 111

    System administration with cli um1600-2-a 2002 109 parameter type parameter data-type and field description user name none user account example:this example shows how to delete the user account guest1. Smartdslam# delete user guest1 yes or no ? Note: you can’t delete your own account..

  • Page 112: Ems-Netbailiff

    Ems-netbailiff um1600-2-a 2002 110 ems-netbailiff 5 netbailiff is designed to facilitate the management of smartdslam. There are two components to netbailiff---a background server process application and a foreground graphical user interface (gui) client application. The server process application e...

  • Page 113: Installation

    Ems-netbailiff um1600-2-a 2002 111 installation hardware and software requirements the following checklist provides the minimum hardware and software required to operate netbailiff. Windows 2000 netbailiff software package 133 mhz or higher cpu 2gb hard disk with a minimum of 650 mb of free space 64...

  • Page 114

    Ems-netbailiff um1600-2-a 2002 112 installing netbailiff 1. Insert netbailiff cd into cd –rom drive, say f: 2. From the program manager window, choose the start button and then run. 3. Type “f:\disk1\setup.Exe” in the command line field and choose ok, then the welcome window of netbailiff setup appe...

  • Page 115

    Ems-netbailiff um1600-2-a 2002 113 6. When the select program folder window appears, you may either choose the default program folder, “smartdslam”, or enter the name you prefer. Then, click on “next>” button to continue,.

  • Page 116

    Ems-netbailiff um1600-2-a 2002 114 7. When setup process status window appears, the installation process is now in progress. This window displays a bar indicating the percentage of completion for the current installation. In addition, the names of the files being installed appear above the bar until...

  • Page 117

    Ems-netbailiff um1600-2-a 2002 115 setting snmp services the snmp service of windows 2000 network function is required and must be configured before running netbailiff. The procedure of setting snmp services is to open the control panel folder from windows program manager. Then choose service icon t...

  • Page 118

    Ems-netbailiff um1600-2-a 2002 116 3. After you click on add/remove button. The following dialogue box then prompts to you for confirmation. Click on “yes” to continue the removal process. 4. The following window, “un-installation completion status” appears. Click “ok” to complete the removal proces...

  • Page 119: Starting The System

    Ems-netbailiff um1600-2-a 2002 117 starting the system from program manager, choose the “c-com nms-a1” program group in the program manager window. Then, choose the “bailiff” program item to launch the program. Logging into the system 1. Once the system is started, the login window then prompts as f...

  • Page 120: Terminating The System

    Ems-netbailiff um1600-2-a 2002 118 can be performed through agent desktop although you can achieve the same purpose by using the menus and commands. Terminating the system to terminate the system at any time, simply choose the exit command from session menu. The system then terminates. Logging out t...

  • Page 121: Managing Smartdslam Agents

    Ems-netbailiff um1600-2-a 2002 119 managing smartdslam agents all of the smartdslam agents that are to be managed by netbailiff must be “registered” to the system. The “registeration” process is to make the system aware of agent’s ip address and alias name. Once an agent is registered, it is put int...

  • Page 122

    Ems-netbailiff um1600-2-a 2002 120 data. 2. Enter values in fields, ip address, and description. The apply button to the left of these fields then become enable. 3. Click on apply button to apply the agent to the system. 4. If to activate (so-called “mount”) the system’s monitoring of an agent, clic...

  • Page 123

    Ems-netbailiff um1600-2-a 2002 121 1. Select the required agent in the mount agent list, then click on the demount button . The agent will then disappears from the mount agent list and appears on the demount agent list on the left. 2. Click on close button to exit the window or continue to perform o...

  • Page 124: Managing User Accounts

    Ems-netbailiff um1600-2-a 2002 122 managing user accounts netbailiff uses user accounts, password as well as power level (system privileges) to control access and log in. There are two types of privileges, administrator and guest. Administrator: the highest level. User with this privilige can access...

  • Page 125

    Ems-netbailiff um1600-2-a 2002 123 2. Enter the account information as described in security window below. 3. Click on close button to exit the window or continue to perform other operations in the same window. If to remove a user account from the system, 1. Select a user account by clicking on the ...

  • Page 126

    Ems-netbailiff um1600-2-a 2002 124 1. Either add or modify action buttons is selected, this window appears. 2. Enter data in the fields, user account, user name, description, password as required. Re-enter the password in field, verify password, for purpose of verification. 3. If to force the user t...

  • Page 127

    Ems-netbailiff um1600-2-a 2002 125 6. If to remove a power level from the user, click on the desired entry in the mount list on the right, then click on the demount button, . The selected power level entry will then be removed. 7. Click on ok button to complete the operation or cancel to abort the c...

  • Page 128

    Ems-netbailiff um1600-2-a 2002 126 agent desktop (network monitor) agent desktop (see below) is the main window for the network administrators in performing their day-to-day network monitoring jobs. Like the standard desktop of ms windows, agent desktop appears at all time once the system is started...

  • Page 129

    Ems-netbailiff um1600-2-a 2002 127 options. It also allows you to view the system information. Legends icons the grade of alarm indicated abbreviation icons after the alarm has been viewed. Major alarm mj minor alarm mn outstanding event and system information this window allows you to view the outs...

  • Page 130

    Ems-netbailiff um1600-2-a 2002 128 2. Click on sysinfo button to get the information of your smartdslam. It is only provided when you click on the agent. The window appears as follow: 3. Click on emweb button to link to emweb for configuration, if you needed. 4. Click on close button to exit the win...

  • Page 131

    Ems-netbailiff um1600-2-a 2002 129 table 5-4 outstanding event window field definitions field description happen time the date/time when the event is occurred. Agent the ip address of the agent associated shelf the shelf number associated. Unit the slot number associated loop co indicates central of...

  • Page 132

    Ems-netbailiff um1600-2-a 2002 130 3. Click on emweb button to link to emweb for configuration, if you needed. 4. Click on close button to exit the window. Table 5-6 closed event window field definition field description release time the date/time when the event is closed. Others rest of the fields ...

  • Page 133

    Configuration backup and restore um1600-2-a 2002 131 configuration backup and restore 6 this chapter describes how to back up your user configuration from ipam-1600s onto your computer and restore them from computer to ipam-1600s using configuration file “sf_user.Cfg”. This chapter will cover the de...

  • Page 134

    Configuration backup and restore um1600-2-a 2002 132 configuration: step 1: open a terminal emulation interface in order to execute cli. Step 2: enter the command “upgrade enable” in command line interface for executing tftp to ipam-1600s. Example smartdslam# upgrade enable yes or no ? Y system is i...

  • Page 135: Configuration Restore

    Configuration backup and restore um1600-2-a 2002 133 configuration restore describes how to restore your configuration settings from computer to smartdslam. The following procedures will help you to restore configuration: step 1: open the hyber terminal interface in order to execute cli. Step 2: ent...

  • Page 136: Troubleshooting

    Troubleshooting um1600-2-a 2002 134 troubleshooting 7 this chapter describes some potential problems and possible remedies and helps you diagnose and solve the problems. It includes the problems of: problems with starting up ipam-1600s this section describes the corrective actions of the problems wi...

  • Page 137

    Troubleshooting um1600-2-a 2002 135 problems with starting up ipam-1600s table 7-1 troubleshooting the start-up your ipam-1600s problems steps to take none of the led(s) are on 1. Check all cables connection. 2. If the leds remain off, contact for technical support. The led(s) are on, but data can n...

  • Page 138

    Troubleshooting um1600-2-a 2002 136 problems with snmp table 7-3 troubleshooting the snmp server problems steps to take the snmp manager server can not get information from ipam-1600s 1. Check to see that the community in the ipam-1600s matches the snmp server’s community. 2. If the above corrective...

  • Page 139: Appendix-A: Pin Assignment

    Appendix-a um1600-2-a 2002 137 appendix-a: pin assignment cid pin assignment the cid port is configured as dce. The connection for such link is given below: table a-1 ipam-1600s cid port pin assignment pin no. Usage 1 ---------- 2 rd 3 td 4 dtr 5 gnd 6 dsr 7 rts 8 ------------ 9 ------------ note: c...

  • Page 140

    Appendix-a um1600-2-a 2002 138 table a-4 uplink and downlink port (xn) pin assignment pin no. Usage 1 tx+ 2 tx- 3 rx+ 4 --------- 5 --------- 6 rx- 7 --------- 8 ---------- note: (1) ports are auto-crossover (2) connector type is rj 45 transceiver connector pin assignment table a-5 8 ports adsl line...

  • Page 141

    Appendix-a um1600-2-a 2002 139 8 phone#8-t 33 phone#8-r 9 : 25 : : : 34 : 50 : : : note: connector type is 50 pin teleco-champ female.

  • Page 143: Glossary

    Glossary um1600-2-a november 2002 141 glossary aal atm adaptation layer. Service-dependent sublayer of the data link layer. The aal accepts data from different applications and presents it to the atm layer in the form of 48-byte atm payload segments. Aals consist of two sublayers: cs and sar. Aals d...

  • Page 144

    Glossary um1600-2-a november 2002 142 atu-c adsl transmission unit—central office. Atu-r adsl transmission unit—remote. Bas broadband access server. Device within the adsl pop terminating ppp sessions providing access to routing or service selection. Can be the same hardware platform as the lac. Bra...

  • Page 145

    Glossary um1600-2-a november 2002 143 digital subscriber line access multiplexer. A device that concentrates traffic in dsl implementations through a process of time-division multiplexing (tdm) at the co or remote line shelf. This device is usually located in the co for termination of multiple custo...

  • Page 146

    Glossary um1600-2-a november 2002 144 user's premises. Lofs (loss of frames) lofs is a generic term with various meanings depending on the signal standards domain in which it’s being used. Lols (loss of links) lols is a generic term with various meanings depending on the signal standards domain in w...

  • Page 147

    Glossary um1600-2-a november 2002 145 pstn (public switched telephone network) general term referring to the variety of telephone networks and services in place worldwide. Sometimes called pots. Pvc( permanent virtual circuit, or connection) virtual circuit that is permanently established. Pvcs save...

  • Page 148

    Glossary um1600-2-a november 2002 146 selection. Snmp (simple network management protocol) simple network management protocol. The network management protocol used almost exclusively in tcp/ip networks. Snmp provides a means to monitor and control network devices, and to manage configurations, stati...