C. Crane CCRadio SW Instruction Manual - page 16
Page 16
CCRadio SW
Features and Operation Explained — Front of Radio
This switch is used with “AM/SW–FM” band switch
o
to select
AM
band or
SW
band ranges
“SW1”, “SW2” and “SW3”.
AM/SW SWITCH
i
This switch is used to select
AM
and
SW
“WIDE” and “NARROW” modes. It is also used to
select
FM
“MONO” and “STEREO” modes. The “MONO” setting will give the best reception
while listening to a weak station.
TUNING TIP:
To tune to
SW
, set this switch to
AM
“WIDE.” Then using the “AM/SW BAND”
switch
i
, select either “SW1”, “SW2” or “SW3”. To tune to
AM
, set this switch to
AM
“WIDE”.
Then set the “AM/SW BAND” switch
i
to
AM
. If you experience overlapping stations or back-
ground noise, try setting the switch to “NARROW”. When tuning
FM
stations, set the switch to
“STEREO” only when you are listening with headphones. The word will be displayed
when a stereo signal is received.
AM/SW–FM BAND SWITCH
o
The “HEADPHONE” jack output will be in stereo for
FM
stations that broadcast in stereo. Set
“AM/SW–FM” band switch
o
to “FM STEREO” position to hear
FM
stations in stereo with
headphones. will be displayed when the “AM/SW–FM” band switch is set to “FM
STEREO” and a stereo signal is received.
HEADPHONE JACK TIP:
When using headphones, turn down the volume before plugging in
headphones.
HEADPHONE JACK
u
distortion, try reducing the “AM RF GAIN” for a clearer signal; and
2) Reduce static. When a signal is amplified by the RF amplifier, background noise is gen-
erally amplified out of proportion to the audio signal. This is due to the inherent nature
of solid state chips. By reducing the “AM RF GAIN” control you can reduce static while
keeping a decent audio signal.
TUNING TIP:
The “AM RF GAIN” knob should be set to full clockwise to begin.
AM
and
SW
station signal strengths are indicated on the display with signal bar graph. If you
experience background noise or overlapping stations when tuning to your sta-
tion, turn the “AM RF GAIN” down or counter clockwise and it will reduce inter-
ference in many cases.