Summary of Senta
Page 1
Senta.
Page 2
Read before operating equipment save these instructions to prevent damage to your radio or possible injury to you or others, read these safety precautions and instructions entirely before applying power to your radio. Keep these precautions and instructions where all who use this radio will read the...
Page 3
2 3 to ensure that your audio does not get interrupted if you accidentally press one of the command buttons, the senta ally has a simple but useful way to prevent an accidental command; a backlight timer (see page 18). When the backlight timer is engaged and no buttons are pressed for 10-60 seconds,...
Page 4
Notes on charging: • it is not necessary to connect the 1/8th inch stereo patch cable to charge the device. This is an audio cable. • the senta-ally can only be charged using the mini-usb port on the side of the device labeled dc in. - note: the standard usb port is not for charging. • when charging...
Page 5
Identification 6 7 quick start guide for playing files or fm radio 1. Charge the battery or plug in the included mini-usb to standard usb cable to a computer. 2. Slide the power switch to the on position. 3. Insert sd card, usb drive, or connect audio input device via the 1/8 inch auxiliary input or...
Page 6
7. On the senta-ally, after successfully connecting, you should see the below screen: 8. Begin playing audio from your media player device and adjust the volume control on both the senta-ally and your media device to the desired levels. Notes: the volume control on your media player will affect the ...
Page 7
About the menu the menu is the first screen presented when the senta-ally is turned on. It contains items labeled files, fm radio, audio input, bluetooth, and settings. Use the left or right arrows on the control pad to highlight your desired mode. Use the play/ pause button to select and enter the ...
Page 8
About fm radio from the fm radio mode, you can listen to fm radio stations and preset stations. To tune through the fm band, use the left or right arrow buttons. 12 13 equalizer (usb/ sd playback only) the equalizer settings allow you to change the way the audio from the senta-ally sounds to suit yo...
Page 9
While in fm mode, press the m button to enter the fm menu. Once you have found the desired frequency, press the m button once to enter the fm menu. Highlight save channel and single-press the play/ pause button. The station is now saved to your presets. Repeat the above to add more presets. Once you...
Page 10
About settings from the settings mode, you may make changes to the sleep timer, repeat mode, backlight time settings and contrast. Use the left or right arrows to highlight the setting you’d like to adjust. Then use the play/ pause button to select the desired setting. Use the left or right arrows t...
Page 11
Backlight the amount of time that the backlight stays on after pressing a button can be changed in this section. The time duration options are: always on, 10 seconds, 20 seconds, 30 seconds, and 60 seconds. Note: adjusting the backlight time to be on for only as long as needed is recommended. Minimi...
Page 12
Troubleshooting the senta-ally speaker will not turn on: -if using the provided mini usb cable, verify that the cable is securely connected to the mini usb port on the senta ally speaker and the usb port on your computer. -if using the battery, connect the unit to a computer usb port and allow suffi...
Page 13
Technical specifications speaker: 2 x 1.5” 4 Ω output power: 5w frequency response: 100hz-20khz sensitivity: 80db ± 2db snr: ≥ 80db distortion: ≤ 0.7% battery: li-ion nokia bl-5c senta ally instruction manual r14 22 23.