Securit 703 user manual c & k systems ltd the securit 703. User instructions version 1.4 september 1996 c031-111-03.
1 1.0 setting 1.1 full set to start the exit procedure ensure all alarmed zones are clear and enter your four digit user code, the buzzer will emit a steady sound and the exit time will start. Leave the building by the approved exit route and close the final exit door. Wait outside the door until th...
2 2.0 unsetting enter by your usual route, the buzzer will sound, do not stop go directly to the keypad. Enter the four digit code, the buzzer will stop and the control return to the 'day' mode. If the exit time has less than 10 seconds remaining the buzzer will emit a quick pulsing sound to indicat...
3 to reset the control enter your user code the sounder will emit a low level two tone alternating ( dee dah ) sound to indicate that there is a "reset required". Press the # key to reset the control. If the reset is allowed an accept tone will be given the leds for the zones in alarm will go out an...
4 tone will be given and your old code will still be valid. Start again and enter a different four digit code. Note: if you require user codes 2,3 or 4 enabled you must make sure user code 1 is not set at 1 2 3 4. If the master code is reset to 1 2 3 4, user codes 2, 3 and 4 will be removed. 4.4 wal...
5 7 log 7 8 log 8 9 log 9 0 the last alarm press the * key to finish. You should test your system at regular intervals, to aid this a walk test mode is provided. You are allowed to test all alarm devices. Do not test any personal attack buttons. Important. If you have any problem with your system or...
6 engineering enter your code and then * 9 9. To remove access simply set the panel and then unset again. The following is given so a record of your zone configurations can be made. Simply fill in where each zone is located in your premises. Also you can fill in any relevant contact numbers zone no....
7 c&k systems ltd. Unit 24 walkers road north moons moat industrial estate redditch worcs b98 9he tel : +44 (0)1527 68111 fax : +44(0)1527 68222 email: info@cksys.Co.Uk http://users.Powernet.Co.Uk/cksys.
