Rapid scene select plate product guide ebr-4sc.
Install the scene plate in a british standard flush box with a depth of at least 25mm. Wire the plate using a cat5 cable with the one end stripped and wired as per the diagram below. If required wire the room divide terminals to a switch (see room divide section) connect the other end of the cat 5 c...
Operation to select scenes 1-4, press the scene button. The led in the button will illuminate. To select scenes 5-8, press and hold the scene button for more than 1 second—the led will flash. The button assignments are: scene 5 = button 1 scene 6 = button 2 scene 7 = button 3 scene 8 = button 4 when...
Commissioning will normally be performed by our trained commissioning engineers. Please note that prior to commissioning, it is the responsibility of the installing contractor to ensure the following: the lcms must be connected and installed mains power must be available luminaires must be plugged i...
Detectors and interfaces the scene plate can be used in conjunction with detectors, groups of detectors and clock interfaces to select scenes. For example a presence detector can be used to select scene 1 when it detects, and select scene 0 when the room is vacant. To work in this mode dependencies ...
Room divide any combination of connecting rooms can be automatically controlled using a combination of scene plates and room divide switches. Using the example overleaf: all rooms will operate independently if the room divide switches are closed. If, for example, switch 151 is opened between room 1 ...
Room 1 room 2 room 3 room 4 room 5 room 6 room 7 room 8 room 9 id 101 id 151 id 101 id 201 scene plate room divide switch id 152 id 102 id 153 id 154 id 103 id 155 id 104 id 156 id 157 id 105 id 158 id 159 id 106 id 160 id 107 id 161 id 108 id 162 id 109 id 110
Ref: #wd242 issue 2 load see datasheet for rapid lcm supply voltage 12vdc temperature -10°c to 35°c conformity emc-89/336/eec lvd-73/23/eec specification part numbers ebr-4sc eight scene, five button scene plate c.P. Electronics ltd brent crescent london nw10 7xr united kingdom tel: + 44 (0) 333 900...
