Cs 4 pi operating instructions.
2 1) control box mounting clip 2) on/off/sensitivity control 3) loudspeaker 4) signal intensity led 5) pulse frequency control 6) battery compartment 7) 8 x aa battery holder 8) battery contacts 9) search-head lead 10) headphone socket 11) control box 12) hand grip 13) upper stem 14) arm support 15)...
3 cs 4 pi overview the cs4pi is a high performance metal detector operating on the ‘pulse induction motion’ principle. Optimum performance is achieved by adopting a steady sweep speed. The cs4pi is an ‘all-metal’ detector which can operate effectively on ground conditions (notably waterlogged areas ...
4 where a background tone is just starting to become apparent. Some detector users prefer to set sensitivity at a lower level than this so that there is no background tone. (sometimes referred to as ‘silent search mode’). 3) loudspeaker (and battery condition indicator). The presence of metal is ind...
5 belt mounting squeeze the control box retaining clips together using your thumbs a shown in the photograph. The control box will now slide towards you free of the control box mounting clip. The control box can be fitted to your belt using the clip provided. In belt mounted use be sure to wind the s...
6 successful treasure hunting starts with a well researched site. Sweep the detector head from side to side with a steady relaxed motion. Keep the search-head parallel and as close as possible to the ground right across the arc of the sweep. The use of a search- head cover protects the head from abr...
7 cs 4 pi the cs4pi is a robust design, however the control box should be treated with similar care as any electronic product. Dry off any water splashes immediately. The search-head may be immersed in water. Stem and search-head parts should be cleaned and dried at the end of a day’s detecting. Do ...
C.Scope international ltd kingsnorth technology park wotton road ashford kent tn23 6ln uk telephone: 01233 629181 fax: 01233 645897 email: info@cscope.Co.Uk internet: www.Cscope.Co.Uk.
