Summary of CS7
Page 1
Cs7 u nderwater m etal d etector operating instructions.
Page 2
2.
Page 3
3 cs7 - rapid get you going instructions 1. Assemble and set stem to desired length. (neatly twist surplus lead around stem close to the handle, and secure with self securing straps). 2. Adjust head to correct angle and tighten both head bolt. 3. Fit batteries and secure battery compartment cover, e...
Page 4: Contents:
4 contents: page introduction 6 assembly 6 batteries 7 battery check 7 controls and what they do 8 operating your cs7 10 important considerations 10 accessories (optional) available from c-scope 10 care of your detector 10 limitation of warranty 11 detector not operating? 11 further information 12 ©...
Page 5
5 controls c-scope cs7 a upper stem b adjustable handle c detachable control box d battery compartment e stem bolt f lower stem g head securing bolt h batt. Check/frequency control i on/off – threshold control j led target indicator k battery condition indicator a b c d e f g i k j h.
Page 6: Introduction
6 introduction to protect your investment complete both sections of the enclosed guarantee card and return the reply paid portion to c-scope (uk only). This is particularly important in order to obtain the free second year parts guarantee. Please retain the original packing box. In the event that yo...
Page 7: Batteries
7 batteries the cs7 is powered by eight aa batteries (not supplied) available from garages, department stores, etc. Or a single 12v rechargeable pack from c-scope. It is advisable to use standard batteries to start with. You can then evaluate the sort of use you give the detector and decide whether ...
Page 8: Controls and What They Do
8 comes on the batteries should be replaced, or recharged in the case of rechargeable batteries. B) turn the threshold control to off. Checking the batteries controls and what they do the control panel comprises two rotary controls, signal and battery condition indicators. I. On/off - threshold cont...
Page 9
9.
Page 10
10 ii. Battery check - frequency control has two main functions in addition to the battery test which is at the switched, fully anti-clockwise position. Small changes to the frequency setting can be used to minimise interference from other signal sources. Changing the frequency also affects the mach...
Page 11: Operating Your Cs7
11 operating your cs7 check the batteries are in good condition prior to, and frequently during the search. With the search head away from metals, the threshold control is increased to the point just below that at which the continuous audio tone is heard. This is the setting that will allow the user...
Page 12: Limitation of Warranty
12 any terrain, but misuse or lack of due attention will tell in the end. After using your detector in a hostile environment (salt water, sand, etc.) the exterior parts should be flushed with clean fresh water, paying particular attention to clean all mating and moving surfaces of sand or silt which...
Page 13: Further Information
13 further information if you experience any difficulty in operating your cs7, or have any questions on the information in your cs7 operating instructions manual, please do not hesitate to phone our customer service department on 44(0)1233629181. Before returning a detector for repair to c-scope ens...