C&T Solution ACO-3000-3765U User Manual - 1.1 Overview

Manual is about: ACO-3000/3011/3022 Series, Vehicle Applied Fanless System

Summary of ACO-3000-3765U

  • Page 1

    Aco-3000 series vehicle applied fanless system.

  • Page 2: Table Of Contents

    Aco-3000 l user’s manual table of contents prefaces …………………………………………………….……………………………………………. 04 revision …………………………………………………………………………………………..……………….……….. 04 disclaimer ………………………………………………………..…….…….………………………….……………….. 04 copyright notice …………………………………….…………………….…………………………………………… 04 trademarks acknowle...

  • Page 3

    Aco-3000 l user’s manual 3 3.8 installing hdd on internal sata hdd bay……………..…………………..………..….... 61 3.9 installing hdd on removable sata hdd bay……………..……….……..………..….... 63 3.10 assemble chassis bottom cover …….…...…..….………………………………………….. 65 3.11 installing sim card …….…………..….……………..….…………………………………...

  • Page 4: Revision

    Aco-3000 l user’s manual 4 revision disclaimer all specifications and information in this user’s manual are believed to be accurate and up to date. C&t solution inc. Does not guarantee that the contents herein are complete, true, accurate or non-misleading. The information in this document is subjec...

  • Page 5: Safety Precautions

    Aco-3000 l user’s manual 5 safety precautions before installing and using the equipment, please read the following precautions:  put this equipment on a reliable surface during installation. Dropping it or letting it fall could cause damage.  the power outlet shall be installed near the equipment ...

  • Page 6

    Aco-3000 l user’s manual 6 technical support and assistance 1. Visit the c&t solution inc website at www.Candtsolution.Com where you can find the latest information about the product. 2. Contact your distributor, our technical support team or sales representative for technical support if you need ad...

  • Page 7: Package Contents

    Aco-3000 l user’s manual 7 package contents before installation, please ensure all the items listed in the following table are included in the package. Item description q’ty 1 aco-3000 series vehicle applied fanless system 1 2 utility dvd driver 1 3 wall mount kit 1 4 accessory kit 1 5 dvi to vga ad...

  • Page 8

    Aco-3000 l user’s manual 8 model no. Product description aco-3000-4p-m12-5350u vehicle applied fanless embedded system with intel® i5-5350u processor, 2x lan, 4x m12 poe aco-3000-4p-m12-5010u vehicle applied fanless embedded system with intel® i3-5010u processor, 2x lan, 4x m12 poe aco-3000-4p-m12-3...

  • Page 9

    Aco-3000 l user’s manual 9 model no. Product description aco-3011p-5350u vehicle applied fanless embedded system with intel® i5-5350u processor, 2x lan, 1x pci expansion aco-3011p-5010u vehicle applied fanless embedded system with intel® i3-5010u processor, 2x lan, 1x pci expansion aco-3011p-3765u v...

  • Page 10

    Aco-3000 l user’s manual 10 model no. Product description aco-3022ee-4l-5350u vehicle applied fanless embedded system with intel® i5-5350u processor, 6x lan, 2x pcie x4 expansion aco-3022ee-4l-5010u vehicle applied fanless embedded system with intel® i3-5010u processor, 6x lan, 2x pcie x4 expansion ...

  • Page 11: Optional Accessories

    Aco-3000 l user’s manual 11 preface model no. Product description aco-3022pp-4l-m12-5350u vehicle applied fanless embedded system with intel® i5-5350u processor, 2x lan, 4x m12 lan, 2x pci expansion aco-3022pp-4l-m12-5010u vehicle applied fanless embedded system with intel® i3-5010u processor, 2x la...

  • Page 12: Chapter  1

    Chapter 1 product introductions.

  • Page 13: 1.1 Overview

    Aco-3000 l user’s manual 13 1.1.1 key features  onboard intel® core ™ i5-5350u (2.9ghz) / core™ i3-5010u (2.1ghz) / celeron ® 3765u (1.9ghz) dual core processor  1x ddr3l so-dimm max. Up to 8gb  triple independent display from 1x dvi-i and 1x displayport  2x intel® gbe port, support wake-on-lan ...

  • Page 14

    Aco-3000 l user’s manual 14 1.2 hardware specification chapter 1: product introductions processor system • onboard intel® core ™ i5-5350u / core™ i3-5010u / celeron ® 3765u dual core processor, 2.9 / 2.1 / 1.9ghz with ami 64mbit spi bios memory • 1x 204-pin ddr3l-1066 / 1333mhz so-dimm (un-buffered ...

  • Page 15: 1.3  System I/o

    Aco-3000 l user’s manual 15 1.3 system i/o 1.3.1 aco-3000 chapter 1: product introductions front panel atx power on/off switch press to power-on or power-off the system reset switch press to reset the system at/atx mode select switch used to select at or atx power mode 12v/24v power input select swi...

  • Page 16

    Aco-3000 l user’s manual 16 chapter 1: product introductions rear panel dc in used to plug a dc power input with terminal block dvi-i port used to connect a dvi monitor or connect optional split cable for dual display mode displayport used to connect a displayport monitor usb 3.0 port used to connec...

  • Page 17

    Aco-3000 l user’s manual 17 1.3.2 aco-3000-4l(p) chapter 1: product introductions front panel atx power on/off switch press to power-on or power-off the system reset switch press to reset the system at/atx mode select switch used to select at or atx power mode 12v/24v power input select switch used ...

  • Page 18

    Aco-3000 l user’s manual 18 chapter 1: product introductions rear panel dc in used to plug a dc power input with terminal block dvi-i port used to connect a dvi monitor or connect optional split cable for dual display mode displayport used to connect a displayport monitor usb 3.0 port used to connec...

  • Page 19

    Aco-3000 l user’s manual 19 1.3.3 aco-3000-4l(p)-m12 chapter 1: product introductions front panel atx power on/off switch press to power-on or power-off the system reset switch press to reset the system at/atx mode select switch used to select at or atx power mode 12v/24v power input select switch u...

  • Page 20

    Aco-3000 l user’s manual 20 chapter 1: product introductions rear panel dc in used to plug a dc power input with terminal block dvi-i port used to connect a dvi monitor or connect optional split cable for dual display mode displayport used to connect a displayport monitor usb 3.0 port used to connec...

  • Page 21

    Aco-3000 l user’s manual 21 1.3.4 aco-3011e(p) chapter 1: product introductions front panel atx power on/off switch press to power-on or power-off the system reset switch press to reset the system at/atx mode select switch used to select at or atx power mode 12v/24v power input select switch used to...

  • Page 22

    Aco-3000 l user’s manual 22 chapter 1: product introductions rear panel dc in used to plug a dc power input with terminal block dvi-i port used to connect a dvi monitor or connect optional split cable for dual display mode displayport used to connect a displayport monitor usb 3.0 port used to connec...

  • Page 23

    Aco-3000 l user’s manual 23 1.3.5 aco-3011e-4l(p) / aco-3011p-4l(p) chapter 1: product introductions front panel atx power on/off switch press to power-on or power-off the system reset switch press to reset the system at/atx mode select switch used to select at or atx power mode 12v/24v power input ...

  • Page 24

    Aco-3000 l user’s manual 24 chapter 1: product introductions rear panel dc in used to plug a dc power input with terminal block dvi-i port used to connect a dvi monitor or connect optional split cable for dual display mode displayport used to connect a displayport monitor usb 3.0 port used to connec...

  • Page 25

    Aco-3000 l user’s manual 25 1.3.6 aco-3011e-4l(p)-m12 / aco-3011p-4l(p)-m12 chapter 1: product introductions front panel atx power on/off switch press to power-on or power-off the system reset switch press to reset the system at/atx mode select switch used to select at or atx power mode 12v/24v powe...

  • Page 26

    Aco-3000 l user’s manual 26 chapter 1: product introductions rear panel dc in used to plug a dc power input with terminal block dvi-i port used to connect a dvi monitor or connect optional split cable for dual display mode displayport used to connect a displayport monitor usb 3.0 port used to connec...

  • Page 27

    Aco-3000 l user’s manual 27 chapter 1: product introductions 27 1.3.7 aco-3022ee(pp) front panel atx power on/off switch press to power-on or power-off the system reset switch press to reset the system at/atx mode select switch used to select at or atx power mode 12v/24v power input select switch us...

  • Page 28

    Aco-3000 l user’s manual 28 chapter 1: product introductions 28 rear panel dc in used to plug a dc power input with terminal block dvi-i port used to connect a dvi monitor or connect optional split cable for dual display mode displayport used to connect a displayport monitor usb 3.0 port used to con...

  • Page 29

    Aco-3000 l user’s manual 29 chapter 1: product introductions 29 1.3.8 aco-3022ee-4l(p) / aco-3022pp-4l(p) front panel atx power on/off switch press to power-on or power-off the system reset switch press to reset the system at/atx mode select switch used to select at or atx power mode 12v/24v power i...

  • Page 30

    Aco-3000 l user’s manual 30 chapter 1: product introductions 30 rear panel dc in used to plug a dc power input with terminal block dvi-i port used to connect a dvi monitor or connect optional split cable for dual display mode displayport used to connect a displayport monitor usb 3.0 port used to con...

  • Page 31

    Aco-3000 l user’s manual 31 chapter 1: product introductions 31 31 1.3.9 aco-3022ee-4l(p)-m12 / aco-3022pp-4l(p)-m12 front panel atx power on/off switch press to power-on or power-off the system reset switch press to reset the system at/atx mode select switch used to select at or atx power mode 12v/...

  • Page 32

    Aco-3000 l user’s manual 32 chapter 1: product introductions 32 32 rear panel dc in used to plug a dc power input with terminal block dvi-i port used to connect a dvi monitor or connect optional split cable for dual display mode displayport used to connect a displayport monitor usb 3.0 port used to ...

  • Page 33

    Aco-3000 l user’s manual 33 1.4 mechanical dimensions 1.4.1 aco-3000 / aco-3000-4l(p) / aco-3000-4l(p)-m12 unit: mm chapter 1: product introductions.

  • Page 34

    Aco-3000 l user’s manual 34 1.4.2 aco-3011e(p) / aco-3011e(p)-4l(p) / aco-3011e(p)-4l(p)-m12 unit: mm chapter 1: product introductions.

  • Page 35

    Aco-3000 l user’s manual 35 1.4.3 aco-3022ee(pp) / aco-3022ee(pp)-4l(p) / aco-3022ee(pp)-4l(p)-m12 unit: mm chapter 1: product introductions.

  • Page 36: Chapter  2

    Chapter 2 switches and connectors.

  • Page 37

    Aco-3000 l user’s manual 37 2.1 switch and connector locations 2.1.1 top view chapter 2: switches and connectors.

  • Page 38

    Aco-3000 l user’s manual 38 2.1.2 bottom view chapter 2: switches and connectors.

  • Page 39

    Aco-3000 l user’s manual 39 2.2 connector / switch definition list of connector / switch chapter 2: switches and connectors connector location definition at_atx1 at / atx power mode switch clr_cmos1 clear bios switch car_pwr1 car / pc function switch 12v_24v_sel1 12v / 24v car battery switch delay_t...

  • Page 40: 2.3 Switches Definitions

    Aco-3000 l user’s manual switch definition 1-2 (left) at power mode 2-3 (right) atx power mode(default) 40 2.3 switches definitions at_atx1: at / atx power mode switch clr_cmos1: clear bios switch switch definition off normal status (default) on clear bios chapter 2: switches and connectors switch d...

  • Page 41

    Aco-3000 l user’s manual chapter 2: switches and connectors step of setting power ignition step 1: to select power ignition by pc/car switch. Step 2: to select battery input voltage by 12v / 24v switch. Step 3: to configure the power off delay time, please check the delay time setting options in adv...

  • Page 42: 2.4 Connectors Definitions

    Aco-3000 l user’s manual 42 2.4 connectors definitions chapter 2: switches and connectors 42 pwr_sw1: power button pin definition pin definition 1 nc 4 gnd 2 power button 5 nc 3 nc 6 gnd chapter 2: switches and connectors reset1 : reset button pin definition 1 reset 2 gnd usb1_2_1: usb3.0 connector,...

  • Page 43

    Aco-3000 l user’s manual 43 chapter 2: switches and connectors 43 sim1, sim2:sim card socket pin definition pin definition c1 uim_pwr c6 uim_vpp c2 uim_reset c7 uim_data c3 uim_clk cd nc c5 gnd com gnd com1_1: rs232 / rs422 / rs485 connector connector type: 9-pin d-sub pin rs232 definition rs422 / 4...

  • Page 44

    Aco-3000 l user’s manual 44 chapter 2: switches and connectors 44 com3_1: : rs232 / rs422 / rs485 connector connector type: 9-pin d-sub pin rs232 definition rs422 / 485 full duplex definition rs485 half duplex definition 1 dcd3 tx3- data3- 2 rxd3 tx3+ data3+ 3 txd3 rx3+ 4 dtr3 rx3- 5 gnd 6 dsr3 7 rt...

  • Page 45

    Aco-3000 l user’s manual 45 chapter 2: switches and connectors 45 lan1, lan2: rj45 with leds port connector type: rj45 connector pin definition pin definition 1 lan1_mdi0p 5 lan1_mdi2n 2 lan1_mdi0n 6 lan1_mdi1n 3 lan1_mdi1p 7 lan1_mdi3p 4 lan1_mdi2p 8 lan1_mdi3n pin definition pin definition 1 lan2_...

  • Page 46

    Aco-3000 l user’s manual 46 chapter 2: switches and connectors 46 dc_in1: dc power input connector (+9~48v) connector type: terminal block 1x3 3-pin, 5.0mm pitch pin definition 1 +9~48vin 2 power ignition 3 gnd lan3, lan4, lan5, lan6: m12 lan port connector type: m12 x-code female connector pin lan3...

  • Page 47

    Aco-3000 l user’s manual 47 chapter 2: switches and connectors dp1: displayport connector pin definition pin definition 1 dp_lane0_p 11 gnd 2 gnd 12 dp_lane3_n 3 dp_lane0_n 13 gnd 4 dp_lane1_p 14 gnd 5 gnd 15 dp_aux_p 6 dp_lane1_n 16 gnd 7 dp_lane2_p 17 dp_aux_n 8 gnd 18 dp_hpd 9 dp_lane2_n 19 gnd 1...

  • Page 48

    Aco-3000 l user’s manual 48 chapter 2: switches and connectors pwr_sw2 : remote power switch connector type: terminal block 1x2 2-pin, 3.5mm pitch pin definition 1 power button 2 gnd.

  • Page 49

    Aco-3000 l user’s manual 49 chapter 2: switches and connectors cn1: mini pci-express / msata socket cn2: mini pci-express / msata socket pin definition pin definition pin definition 1 wake# 19 nc 37 gnd 2 +3.3v 20 +3.3v 38 usb_d5+ 3 nc 21 gnd 39 +3.3v 4 gnd 22 minipcie rst# 40 gnd 5 nc 23 minipcie_r...

  • Page 50

    Aco-3000 l user’s manual 50 chapter 2: switches and connectors sata1, sata2: sata with power connector pin sata1 definition pin sata1 definition pin sata2 definition pin sata2 definition 1 gnd 12 gnd 1 gnd 12 gnd 2 sata_txp0 13 gnd 2 sata_txp1 13 gnd 3 sata_txn0 14 +5v 3 sata_txn1 14 +5v 4 gnd 15 +5...

  • Page 51

    Aco-3000 l user’s manual 51 chapter 2: switches and connectors pwr_led1: power led status pin definition 1 power led+ 2 power led- pin definition 1 hdd led+ 2 hdd led- hdd_led1: hdd access led status pin definition 1 watchdog led+ 2 watchdog led- wdt_led1: watchdog led status pin definition 1 gpio l...

  • Page 52: Chapter  3

    Chapter 3 system setup.

  • Page 53: Unscrewing.

    Aco-3000 l user’s manual 53 3.1 set torque force to 3.5 kgf-cm to execute all the screwing and unscrewing. 3.2 removing chassis bottom cover 1. Turn the system upside down. Unscrew the 6 screws (m3x5l) on the bottom cover. 2. Now you can remove the bottom cover. Chapter 3: system setup in order to p...

  • Page 54

    Aco-3000 l user’s manual 54 3.3 removing chassis top cover 1. Unscrew the four screws (m3x5l) highlighted below. 2. Hold the body of the system and lift it vertically away from the top cover. 3. Top cover separated from the system body. Chapter 3: system setup.

  • Page 55: 3.4 Installing Sodimm

    Aco-3000 l user’s manual 55 3.4 installing sodimm 1. Place the system body with sodimm socket facing upward. 2. Insert memory module from 45 degree direction. 3. Press the memory module vertically downward until you hear the “click” sound. Make sure the memory module is firmly in place. Chapter 3: s...

  • Page 56

    Aco-3000 l user’s manual 56 3.5 installing mini pcie card / msata 1. Two mini pcie slots are available for aco-3000 series. They both also support msata. 2. Insert mini pcie card or msata module from 45 degree direction. 3. Press the mini pcie card or msata module down and lock it with two screws (m...

  • Page 57: 3.6  Installing Antenna

    Aco-3000 l user’s manual 57 3.6 installing antenna 1. Three antenna holes are available for aco-3000 series on the rear panel. 2. Remove antenna hole cover on the system panel. 3. Have antenna jack penetrate through the hole. Chapter 3: system setup.

  • Page 58

    Aco-3000 l user’s manual 58 4. Put on washer and fasten the nut with antenna jack. 5. Attach the rf connector at the cable-end onto the communication module. 6. Assemble the antenna and antenna jack together. Chapter 3: system setup.

  • Page 59

    Aco-3000 l user’s manual 59 3.7 assembly chassis top cover 1. Place both top cover and system body upside down as shown below. 2. Ensure thermal pad is in place on the cpu thermal block. 3. Hold the system body and slide the front/rear panel into the slide rail on the top cover. Chapter 3: system se...

  • Page 60

    Aco-3000 l user’s manual 60 4. Push the system body down until it is firmly in place. 5. Fasten the four screws (m3x5l) to lock the system body with top cover. Chapter 3: system setup.

  • Page 61

    Aco-3000 l user’s manual 61 3.8 installing hdd on internal sata hdd bay 1. Unscrew the below four screws (m3x5l) to remove the internal sata hdd bay. 2. Lock the 2.5” hdd with hdd bracket using four screws (m3x4l). Chapter 3: system setup.

  • Page 62

    Aco-3000 l user’s manual 62 3. Install the hdd bracket following the direction below. 4. Fasten the four screws to lock the internal hdd bracket. Chapter 3: system setup.

  • Page 63

    Aco-3000 l user’s manual 63 3.9 installing hdd on removable sata hdd bay 1. Unscrew the two sun screws circled below to take out the removable sata hdd bay. 2. Lock the 2.5” hdd with hdd bracket using four screws (m3x4l). Chapter 3: system setup.

  • Page 64

    Aco-3000 l user’s manual 64 3. Slide the hdd bracket back and then fasten the sun screws. Chapter 3: system setup.

  • Page 65

    Aco-3000 l user’s manual 65 3.10 assemble chassis bottom cover 1. Place the bottom cover according to the below direction and make sure the rail is facing inside the system. 2. Lock the bottom cover with the four screws (m3x5l). Chapter 3: system setup.

  • Page 66: 3.11  Installing Sim Card

    Aco-3000 l user’s manual 66 3.11 installing sim card 1. Take out the removable sata hdd bay in order to locate the sim card slot. 2. Now you can insert sim card into the socket. 3. Please note that the installation of sim 1 and sim 2 has to match the installation of mini pcie slots. 4. To uninstall ...

  • Page 67

    Aco-3000 l user’s manual 67 3.12 to configure power ignition settings 1. Ignition power control area is available for aco-3000 series on the front panel. 2. Unscrew the below screw to remove the control area cover. 3. Now you can configure car mode delay time setting switch, pc/car mode select switc...

  • Page 68

    Aco-3000 l user’s manual 68 3.13 installing wall mount kit 1. Wall mount kit is available for aco-3000 series included in the standard package. 2. Place the system upside down so you can see the bottom cover. The highlighted screw holes below will be used. 3. Lock the wall mount kit with eight screw...

  • Page 69

    Aco-3000 l user’s manual 69 3.14 installing din rail holder 1. Din rail holder is available for aco-3000 series as optional accessories. 2. Place the system upside down so you can see the bottom cover with two screw holes for din rail holder. 3. Place the din rail holder on top of the bottom cover a...

  • Page 70: Chapter  4

    Chapter 4 bios setup.

  • Page 71: 4.1 Bios Introduction

    Aco-3000 l user’s manual 71 4.1 bios introduction the system bios software is stored on eeprom. The bios provides an interface to modify the configuration. When the battery is removed, all the parameters will be reset. Bios setup power on the embedded system and by pressing or immediately allows you...

  • Page 72: 4.2 Main Setup

    Aco-3000 l user’s manual 72 4.2 main setup press to enter bios cmos setup utility. The main setup screen is showed as following when the setup utility is entered. System date/time is set up in the main menu. Chapter 4: bios setup 4.2.1 system language set the system language. Please use to switch be...

  • Page 73: 4.3  Advanced Setup

    Aco-3000 l user’s manual 73 4.3 advanced setup 4.3.1 cpu configuration chapter 4: bios setup ■ hyper-threading this item allows you to enable or disable the intel hyper-threading technology. ■ active processor cores set number of cores to be enabled. Select or mode..

  • Page 74

    Aco-3000 l user’s manual 74 chapter 4: bios setup 4.3.2 acpi settings ■ enable acpi auto configuration this item allows you to enable or disable bios acpi auto configuration. ■ enable hibernation this item allows you to enable or disable system ability to hibernate.  enhanced c1 state this item all...

  • Page 75

    Aco-3000 l user’s manual 75 chapter 4: bios setup ■ intel amt this item allows you to enable or disable intel active management technology bios extension. ■ bios hotkey pressed this item allows you to enable or disable bios hotkey press function. ■ mebx selection screen this item allows you to enabl...

  • Page 76

    Aco-3000 l user’s manual 76 chapter 4: bios setup 4.3.4 super io configuration this setting allows you to select options for the super io configuration, and change the value of the selected option. ■ serial port 1 configuration  serial port this item allows you to enable or disable serial port.  c...

  • Page 77

    Aco-3000 l user’s manual 77 ■ serial port 2 configuration chapter 4: bios setup  serial port this item allows you to enable or disable serial port.  change settings this item allows you to change the address & irq settings of the specified serial port.  device type select change the serial interf...

  • Page 78

    Aco-3000 l user’s manual 78 ■ serial port 4 configuration  serial port this item allows you to enable or disable serial port.  change settings this item allows you to change the address & irq settings of the specified serial port.  device type select change the serial interface. Select , or inter...

  • Page 79

    Aco-3000 l user’s manual 79 chapter 4: bios setup 4.3.5 hardware monitor these items display the current status of all monitored hardware devices/ components such as voltages and temperatures. 4.3.6 serial port console redirection ■ console redirection this item allows you to enable or disable conso...

  • Page 80

    Aco-3000 l user’s manual 80 chapter 4: bios setup 4.3.7 sata configuration ■ sata controller(s) this item allows you to enable or disable sata controller. ■ sata mode selection this item allows you to select ahci or raid mode. ■ sata controller speed the item is for user to set the maximum speed the...

  • Page 81

    Aco-3000 l user’s manual 81 chapter 4: bios setup 4.3.8 network stack configuration ■ network stack use this item to enable or disable uefi network stack..

  • Page 82

    Aco-3000 l user’s manual 82 chapter 4: bios setup 4.3.9 csm configuration ■ csm support this item allows you to enable or disable csm support. ■ gatea20 active this item allows you to select or . Upon request: ga20 can be disabled using bios services. Always: do not allow ga20 disabling. This option...

  • Page 83

    Aco-3000 l user’s manual 83 4.3.10 usb configuration chapter 4: bios setup ■ legacy usb support this item allows you to select , or . Enabled: to enable legacy usb support. Disabled: to keep usb devices available only for efi specification, auto: to disable legacy support if no usb devices are conne...

  • Page 84

    Aco-3000 l user’s manual 84 4.3.11 intel(r) ethernet connection i218-lm-xx:xx:xx:xx:xx:xx chapter 4: bios setup ■ nic configuration press enter to configure the network device port. ■ blink leds use this item to identify the physical network port by blinking the associated led. ■ link status use thi...

  • Page 85

    Aco-3000 l user’s manual 85 4.3.12 intel(r) i210 gigabit network connection- xx:xx:xx:xx:xx:xx chapter 4: bios setup ■ nic configuration press enter to configure the network device port. ■ blink leds use this item to identify the physical network port by blinking the associated led. ■ link status us...

  • Page 86: 4.4 Chipset

    Aco-3000 l user’s manual 86 4.4 chipset 4.4.1 system agent (sa) configuration chapter 4: bios setup ■ vt-d this item allows you to enable or disable vt-d support..

  • Page 87

    Aco-3000 l user’s manual 87 chapter 4: bios setup  gtt size this item allows you to change the gtt size.  aperture size this item allows you to change the aperture size.  cd clk frequency this item allows you to change the cd clock frequency.  dvmt pre-allocated used the dvmt pre-allocated optio...

  • Page 88

    Aco-3000 l user’s manual 88 chapter 4: bios setup 4.4.2 pch-io configuration ▶ pci express configuration.

  • Page 89

    Aco-3000 l user’s manual 89 chapter 4: bios setup  pci express root port 1 / 2 / 4 / 5 / 6  pci express port 1 / 2 / 4 / 5 / 6 this item allows you to enable or disable pci express port 2 / 4 / 5 / 6 in the chipset.  aspm this item allows you to select the aspm state for energy-saving. Select ,, ...

  • Page 90

    Aco-3000 l user’s manual 90 chapter 4: bios setup 90 chapter 4: bios setup 90 chapter 4: bios setup 90 chapter 4: bios setup  usb precondition precondition work on usb host controller and root ports for faster enumeration.  xhci mode mode of operation of xhci controller.  btcg this item allows yo...

  • Page 91: 4.5 Security

    Aco-3000 l user’s manual 91 chapter 4: bios setup 91 chapter 4: bios setup 91 chapter 4: bios setup 91 chapter 4: bios setup ■ pch lan controller this item allows you to enable or disable the onboard pch integrated ethernet controller. ■ wake on lan this item allows you to enable or disable wake on ...

  • Page 92: 4.6 Boot

    Aco-3000 l user’s manual 92 4.6 boot this menu allows you to setup the system boot options. 4.6.1 setup prompt timeout this item sets number of seconds to wait for setup activation key. 4.6.2 bootup numlock state this item selects the keyboard numlock state. Select or . 4.6.3 full screen logo show t...

  • Page 93: 4.7 Save & Exit

    Aco-3000 l user’s manual 93 4.7 save & exit this setting allows users to configure the boot settings. 4.7.1 save changes and reset this item allows user to reset the system after saving the changes.This item allows user to reset the system after saving the changes. 4.7.2 discard changes and reset th...

  • Page 94: Appendix

    Appendix wdt & gpio this appendix provides the sample codes of wdt (watch dog timer) and gpio (general purpose input/ output)..

  • Page 95: Wdt Sample Code

    Aco-3000 l user’s manual 95 wdt sample code sio_index_port equ 02eh sio_data_port equ 02fh sio_unlock_value equ 087h sio_lock_value equ 0aah watchdog_ldn equ 007h wdt_unit equ 60h ; 60h=second, 68h=minute, 40h=disabled watchdog timer wdt_timer equ 30 ; ex. 30 seconds sample code: ;enable config mode...

  • Page 96: Gpio Sample Code

    Aco-3000 l user’s manual 96 gpio sample code  gpi 1 ~ gpi 4  gpo 1 ~ gpo 4 gpi_reg equ 0a03h gpo_reg equ 0a02h gpo_0 equ 00010000b ____________________________________________________________________________________ sample code: #1 : get gpi 0 status ; get gpi 0 pin status register in al, gpi_reg ...

  • Page 97

    Copyright © c&t solution inc. All rights reserved www.Candtsolution.Com.