CABAC T8211D Operation Manual - page 10
Customer Care Australia P: 133 122 F: 1300 303 310 E: sales@cabac.com.au W: cabac.com.au
A: 8 Distribution Pl, Seven Hills NSW 2147
Customer Care New Zealand P: 8 0077 6969 F: 8 0088 6969 E: sales@cabac.co.nz W: cabac.co.nz
10
5. MAINTENANCE
5.1 BATTERY REPLACEMENT
WARNING
Before attempting to open the battery cover of the meter, be sure that the probe tip of the meter
and test lead (or test clip) have been disconnected from measurement circuit to avoid electric
shock hazard.
5.1.1 If the sign ‘
’ appears on the LCD display, it indicates that the battery should be replaced.
5.1.2
Loosen the screw fixing the battery cover and remove it.
5.1.3
Replace the exhausted battery with a new one.
5.1.4 Put the battery cover as its
origin.
5.2
TEST LEADS (OR TEST CLIP) REPLACEMENT
WARNING
Full in compliance with safety standards can be guaranteed only if used with test leads supplied.
If necessary, they must be replaced with the same model or same electric ratings. Electric ratings
of the test leads:
600
V 10A.
You must be replaced the test lead if the lead is exposed.
6. ACCESSORIES
Test Lead: Electric Ratings
600
V
10
A
one piece
Test Clip: Electric Ratings
600
V
10
A
one piece
Battery:
1.5
V, AAA
two pieces
Instruction Manual
one piece
CAUTION
Using this appliance in an environment with a strong radiated radio-frequency electromagnetic field (approx. 3V/m), may influence
its measuring accuracy. The measuring result can be strongly deviating from the actual value.