CABASSE Xo SYSTEM Owner's Manual - Adjusting

ADJUSTING

Subwoofer adjusting

Take care of positioning the sector switch 115V/230V on the right position according to your

country.

The switch on/off of the subwoofer has 3 positions:

ON

AUTO: Automatic, the system is put automatically on ON or OFF according to the  

the presence of signal coming from the amplifier. 

OFF

Put the switch on/off on AUTO or ON position.

CROSSOVER:  adjust the potentiometer on 200 Hz.

VOLUME: The adjustment of the volume will depend upon room positioning, type of

amplifiers… With Xo SYSYEM the average position is on " 12 am ". For an optimum

adjustment of the volume, we advise you to carry out it starting from a stereo source (CD).

Then use the " test tone " of your audio amplifier video 5.1 to adjust the level of channel

SUBWOOFER / LFE.

PHASE: usually it is necessary to position the potentiometer on 0°, however there is 2

positions: 0° and 180 °.

1 / Adjust the potentiometer on 0° when the subwoofer and the satellites are positioned at

the same distance of the listening area.

2 / Adjust the potentiometer on 180° when the subwoofer is positioned 1,50 m/5 ft ahead or

behind the satellites.

16