Model no. 08-0601-c rev051710 attention if any components of this unit are broken or the unit does not operate properly, please contact cabela’s customer service. Retail store purchases: 1-800-905-2731 (u.S. & canada) catalog and internet purchases: 1-800-237-8888 all international: 1-308-234-5555 d...
-2- -23- _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ ___________...
Component list -3- before beginning the assembly, check the package contents for all of the parts. If you are missing any parts, or if any parts are damaged, cabela’s customer service- retail store purchases 1-800-905-2731 (u.S. & canada) / catalog & internet purchases: 1-800-237-8888 / all internat...
-4- -21- q: the vacuum pump starts, but no air is being remove from the vacuum bag. 1. For the best results, always use cabela’s brand vacuum bags. 2. Be sure that the bag is inserted properly. The open end of the bag should be centered within the oval vacuum chamber seals. Be sure not to cover the ...
Protective tape there is a factory installed strip of teflon tape on the vacuum sealer. Do not remove the tape! Teflon tape do not remove! The seal bar heating element is covered with teflon tape to protect vacuum bags during sealing (figure 1). Do not remove the teflon tape. See the “maintenance ki...
-6- -19- vacuum chamber seals there are two factory-installed oval vacuum chamber seals on the vacuum sealer. When the vacuum lid is closed and downward force applied, they form an airtight seal so the vacuum chamber can be evacuated. The oval vacuum chamber seals may wear over time and require repl...
-7- care & cleaning instructions warning! Before cleaning, assembling or disassembling the vacuum sealer, make sure the vacuum sealer is off and the plug is removed from the outlet/power source! Grounding this appliance must be grounded while in use to protect the operator from electrical shock. The...
I o -8- . Mode button: by pressing the mode button, you can switch between the automatic and manual modes. . The automatic light will be illuminated when the unit is in the automatic mode. The vacuum sealer will begin sealing the bag after the air in the bag has been evacuated. . The manual light wi...
-9- assembly • place the vacuum sealer on a flat, dry surface. • plug the female end of the power cord into the power supply port on the right side of the appliance (figure b). • plug the male end of the power cord into a standard, grounded 120-volt household electrical outlet. Do not attempt to mod...
-10- -15- very moist foods: it is best to freeze very moist food items, like fish, before vacuum sealing them. The excessive moisture can interfere with the sealing bar’s ability to completely fuse the layers of the bag together. Powdery items: when vacuum sealing powdery items, like flour, it is be...
-11- some parts of the vacuum sealer may need replacing after repeated use. The vacuum sealer maintenance kitwillbe necessary for the vacuum sealer to properly function. Replacing the oval vacuum chamber seals: 1. Turn “off” the vacuum sealer and remove the power cord from the electrical outlet. 2. ...
-13- -12- before attempting vacuum packaging, be sure that the vacuum sealer is set up in accordance with all of the safety precautions listed in this booklet. 1. With the vacuum sealer plugged in and the power turned on, check to be sure the manual mode light is illuminated; if not press the mode b...
