Heavy duty meat grinder model no. 33-0101-c rev050410 for household use only. Attention if any components of this unit are broken or the unit does not operate properly, please contact cabela’s customer service. Retail store purchases: 1-800-905-2731 (u.S. & canada) catalog and internet purchases: 1-...
-19- important safeguards when using electrical appliances, basic safety precautions should always be followed including the following: 1. Read all instructions before using the appliance. 2. To protect against risk of electrical shock, do not submerge or use this appliance near water or other liqui...
-3- -18- warning! 1. Do not use the grinder without the tray secured into place. 2. Always disconnect grinder from power source before servicing, changing accessories or cleaning the unit. 3. Plug the grinder into a standard 120 volt, 60 hz wall outlet. 4. Do not use the grinder if the power cord, p...
-4- -17- 1 2 3 5 6 4 7 8 9 10 11 12 13 13 14 15 16 17 18 19 20 21 plastic square washer white plastic washer metal washer auger bearing (2) small washer auger screw types of sausage most sausages fall into one of four categories: fresh, smoked, cooked or dried. All sausages, except dried, require re...
This appliance is equipped with a polarized plug (one blade is wider than the other) to reduce the risk of electric shock. The plug must fully fit into an electrical outlet. If the plug does not fit, reverse it and try again. If it still does not fit, contact a qualified electrician to inspect and/o...
Cleaning 1. Unscrew the ring nut and remove all parts from the grinder head (figure a). 2. To remove the grinder head, press the head release button and turn the grinder head clockwise (figure b). 3. Wash all parts that come in contact with food in hot soapy water. Rinse with clear water. Dry immedi...
-7- -14- grinder assembly 1. Remove the ring nut, grinding plate, knife and auger from the grinder head before installing the grinder head to the main body. 2. Align the notches on the grinder head with the tabs on the main body. 3. Press the grinder head against the motor and rotate it counterclock...
1. Follow the “grinder assembly instructions” to fully assemble the grinder including the tray. Note: it is best to grind the meat using the coarse, 8 mm grinding plate first. If a finer grind of meat is desired, run the coarse ground meat through the grinder a second time using the fine, 4.5 mm or ...
-9- -12- stuffer assembly 1. Remove the ring nut, grinding plate, knife and auger from the grinder head before installing the grinder head to the main body. 2. Align the notches in the grinder head with the tabs on the main body. 3. Press the grinder head against the motor and rotate it counterclock...
Stuffing instructions -10- -11- warning! Before cleaning, assembling or disassembling the grinder, make sure the plug is removed from the outlet/power source! Always unplug the grinder when not in use. 1. After grinding the meat following the “grinding instructions”, mix the ground meat with the sau...
