Parts list 1. Never operate this appliance unattended. 2. Never operate this appliance within 10 ft (3 m) of any structure, combustible material or other gas cylinder. 3. Never operate this appliance within 25 ft (7.5 m) of any flammable liquid. 4. If a fire should occur, keep away from appliance an...
Parts list 1. Never operate this appliance unattended. 2. Never operate this appliance within 10 ft (3 m) of any structure, combustible material or other gas cylinder. 3. Never operate this appliance within 25 ft (7.5 m) of any flammable liquid. 4. If a fire should occur, keep away from appliance an...
19. Do not use accessories not specified for use with appliance. 20. Never use gasoline, gasoline-type lantern fuel, kerosene, charcoal lighter fluid, or similar liquids to start or freshen up a fire in this appliance. Keep all such liquids well away from the appliance when in use. 21. Ashes should ...
19. Do not use accessories not specified for use with appliance. 20. Never use gasoline, gasoline-type lantern fuel, kerosene, charcoal lighter fluid, or similar liquids to start or freshen up a fire in this appliance. Keep all such liquids well away from the appliance when in use. 21. Ashes should ...
Attach chimney and chimney cap 1. Install chimney to grill as shown in fig 3. Make sure to install the gasket between the grill and the chimney. 2. Tighten all hardware. 3. Install m6 x 76 bolt through chimney cap and secure using qty (1) m6 nut. Thread second nut onto bolt leaving approximately 1.5...
Attach chimney and chimney cap 1. Install chimney to grill as shown in fig 3. Make sure to install the gasket between the grill and the chimney. 2. Tighten all hardware. 3. Install m6 x 76 bolt through chimney cap and secure using qty (1) m6 nut. Thread second nut onto bolt leaving approximately 1.5...
Emptying the hopper this grill is equipped with a hopper drain to quickly remove the pellets from the hopper. This can be used to remove pellets if the grill is being stored for a long time or to remove pellets to change to a different flavor pellet. Warning: never remove the auger guard from the ho...
Emptying the hopper this grill is equipped with a hopper drain to quickly remove the pellets from the hopper. This can be used to remove pellets if the grill is being stored for a long time or to remove pellets to change to a different flavor pellet. Warning: never remove the auger guard from the ho...
1. Make sure the grill is plugged into a powered outlet. Check the circuit breaker and/or gfci switch. Test the outlet using another appliance. 2. Unplug the grill and check the fuse located in the front panel. If the fuse is blown replace only with 5.0 amp 250v 5x20mm slow blow fuse. Typical fuse m...
1. Make sure the grill is plugged into a powered outlet. Check the circuit breaker and/or gfci switch. Test the outlet using another appliance. 2. Unplug the grill and check the fuse located in the front panel. If the fuse is blown replace only with 5.0 amp 250v 5x20mm slow blow fuse. Typical fuse m...
Recipe suggestion and tips pulled pork (boston butt) times and temps 6-8 lbs takes 8-12 hours it’s done when the internal temp reaches 195º-200ª f smoke on the “high smoke” setting on the grill recommended wood pellets: mesquite, apple and alder the cheapest and easiest way to learn about your new s...
Recipe suggestion and tips pulled pork (boston butt) times and temps 6-8 lbs takes 8-12 hours it’s done when the internal temp reaches 195º-200ª f smoke on the “high smoke” setting on the grill recommended wood pellets: mesquite, apple and alder the cheapest and easiest way to learn about your new s...
