Cable Electronics SW204HD Instruction Manual

Other manuals for SW204HD: Instruction Manual
Manual is about: Component Video/Audio 4 x 2 Matrix HDTV SWITCH with Digital Audio

Summary of SW204HD

  • Page 1

    Ce labs, inc. Sw204hd matrix switch in s t r u c t io n m a n u a l component video/audio 4 x 2 matrix hdtv switch with digital audio model: sw204hd * allows you to connect 4 hd sources to either of the two outputs without having to swap cables. Full matrix capabilities. * full metal cabinet has the...

  • Page 2

    Ce labs, inc. Sw204hd matrix switch installation / operation instructions unpack the switch and wall power supply from the box. Pick a suitable location and place the switch close to the equipment to be connected. Plug the end of the power supply into the power jack on the unit. Connect the wall tra...

  • Page 3

    Ce labs, inc. Sw204hd matrix switch sw204hd installation / operation instructions ir remote learning function 1. Press and hold the power switch for 4 seconds. The power may be in the off or on position. The sw204hd will enter the learning mode and output 1, led 1 will flash. To learn a command: 2. ...

  • Page 4

    Ce labs, inc. Sw204hd matrix switch specifications sw204hd video nominal input level: 1 volt peak to peak gain: 1 volt into 75 ohms (2 volts unterminated) input impedance: 75 ohms output impedance: 75 ohms isolation port to port: >40 db isolation on to off: >60 db return loss: >18 db video bandwidth...

  • Page 5

    Ce labs, inc. Sw204hd matrix switch warranty sw204hd cable electronics, inc. Cel warrants this product to be free from defects in material and workmanship, under normal use and service, for a period of one year from the purchase by the original purchaser. If this product is defective or malfunctions...

  • Page 6

    Ce labs, inc. Sw204hd matrix switch appendix a the sw204hd controller application - ce labs, inc the sw204hd controller application controls and monitors the sw204hd video/audio switch. The sw204hd is a 4 input, 2 output switch. Each input and output consists of component video and right/left/digita...

  • Page 7

    Ce labs, inc. Sw204hd matrix switch controlling and monitoring the sw204hd once connected, the sw204hd may be controlled using the power, and select buttons. The current power status of the sw204hd is shown next to the connect status. If power is off, then the following status appears. To toggle pow...

  • Page 8

    Ce labs, inc. Sw204hd matrix switch the graphical status display the lower part of the screen of the sw204 controller shows the switch status in a graphical format. Below, it can be quickly seen that output 2 is connected to input 2 and output1 is connected to input 4. Note that it is possible for b...

  • Page 9

    Ce labs, inc. Sw204hd matrix switch example status with new labels when the power is off, no connections are made and the status will be grayed- out as below. Notes on using usb when a usb cable is first plugged in between a windows xp/vista computer and the sw204hd, a “found new hardware” message c...