Installation manual cta-30/1000 wall mount distribution amplifier 1.
Package contents this package contains: one cta-30/1000 wall mount distribution amplifier one cta-30/1000 installation manual product description the cta-30/1000 is a wall mount push-pull amplifier producing signals with extremely low distortion and harmonic content. The unit is capable of catv 2 to...
Installation and operation 1. Unpacking and handling each unit is shipped with all equipment assembled, and factory tested. Ensure that all accessories are removed from the container before discarding packing material 2. Mechanical inspection inspect the front and rear of the equipment for shipping ...
1 gain adjust for rf gain adjustment 2 tilt adjust for slope adjustment over the entire bandwidth 3 input input rf signal 4 output amplified rf signal available for output 5 -20 db input test port input test port to monitor input level to the amplifier 6 -20 db output test port output test port for ...
The cta-30/1000’s tilt adjust control should be used to set the appropriate slope per system specifications. Note that the tilt adjust allows the adjustment of the gain-to-frequency characteristic of the amplifier. When making adjustments always apply the following principles: 3 input signal levels ...
