1. DL manuals
  2. Cablematic
  3. IP Camera
  4. 1080P
  5. User Manual

Cablematic 1080P User Manual

Summary of 1080P

  • Page 1

    Megapixel ip camera user manual v2.0.0 megapixel ip camera user manual 2013.9.16 v2.0.0

  • Page 2: Introduction

    Megapixel ip camera user manual v2.0.0 introduction productions are embedded system software and 38 special high definition ip camera modules, own compression, video data processing functions, are formed by video compression encoder, input and output channel, network interface, video interface, rs42...

  • Page 3

    Megapixel ip camera user manual v2.0.0  support osd.  support client remote monitor software.  support platform.  support mobile monitor.  support cross service. Our suggestions to customer pc basic configuration as follow: cpu four core 3.0ghz, 4g memory, 512 m independent video memory, 2.1 au...

  • Page 4: Content

    Megapixel ip camera user manual v2.0.0 content introduction....................................................................................................................................1 content.......................................................................................................

  • Page 5

    Megapixel ip camera user manual v2.0.0 4.2.4 link down record....................................................................................................28 4.2.5 link down capture..................................................................................................29 4.2.6 schedu...

  • Page 6: 1 Device And Installation

    Megapixel ip camera user manual v2.0.0 1 device and installation 1.1 specifications model 720p 960p 1080p system structure embedded linux rtos ,dual core 32 bits dsp (ti davinci dm365) embedded linux rtos ,dual core 32 bits dsp (ti davinci dm368) pure hardware compression, watchdog, flash, ddr2. Pur...

  • Page 7: 1.3 Device Connection

    Megapixel ip camera user manual v2.0.0 analog output 1 analog video output ,cvbs supported, pal/ntsc (configurable) audio interface 1 ch audio input(level: 2vp-p, impedance: 1kΩ) , sound pickup supported 1 ch audio output (impedance:16Ω,power output : 30mw), headphone connection or amplifier support...

  • Page 8

    Megapixel ip camera user manual v2.0.0 net mask is 255.255.255.0, accessing the device, you must make sure your computer and the device in the same network segment. If not, add a network segment for your computer. Second, the net mask of the computer and the device must be the same. Last, make sure ...

  • Page 9

    Megapixel ip camera user manual v2.0.0 fiure1.3 enter “ping 192.168.0.123 –t” figure1.4 network is open 4.

  • Page 10: 1.4 Controls Installation

    Megapixel ip camera user manual v2.0.0 figure 1.5 network is not open 1.4 controls installation after connected device and finished configuration network parameter, connect the power, one minute later, open the ie browser, and enter ip address, press “enter”, then come out the login interface as fig...

  • Page 11

    Megapixel ip camera user manual v2.0.0 figure 1.7 please install the plug c. After that, you will see the interface of controls’ installation, of course, different browser version has different interface. If there is no the interface of figure 1.8, look down, in the bottom of the browser, there is a...

  • Page 12: 1.5 Video Browsing

    Megapixel ip camera user manual v2.0.0 figure 1.9 the login interface of device notice: 1. During the installation of controls, because different browser versions may be different interfaces, users need install according prompt message. Some antivirus software may prompt there are security risks, th...

  • Page 13

    Megapixel ip camera user manual v2.0.0 the video browsing interface is made up of three parts: the function button located at the top of the zone, the video window located at the lower left and the ptz control panel area located at the lower right. A. The function button area: include three buttons:...

  • Page 14

    Megapixel ip camera user manual v2.0.0 iris close: reduce iris. Figure 1.11 the setting of orbit/scan function orbit: select “orbit” and click “run” then the ptz will turn among all preset number. Stop orbit: select “orbit stop” and click “run” to stop orbit. Scan start point: turn lens and select “...

  • Page 15

    Megapixel ip camera user manual v2.0.0 “camera reset/switch”, “b/w auto”, “wb r/g/b/m”, “initial set”, “menu”, “track off/on”, “path on/off” and so on. For example, for “black/white” and “color”: we can see the preset number of “black/white” and “color” is 64, but “black/white” is “set preset” and “...

  • Page 16: 2 Network

    Megapixel ip camera user manual v2.0.0 in the main interface click the button of “config”, will come out the dialog of “remote config”. Then you can configure the parameter of network, media, ptz, storage, alarm, system and so on. 2 network 2.1 network status click [network]-[network status], it wil...

  • Page 17: 2.3 Wifi Setup

    Megapixel ip camera user manual v2.0.0 usually set it as 255.255.255.0. The correct net mask is the premise for saving it. Gate way is point between two networks such as router. So you can enter the router ip address. The gateway and ip address must in the same network segment. Dns server address is...

  • Page 18

    Megapixel ip camera user manual v2.0.0 when set the wifi network parameter of wireless router, such as tp-link (the type is tl-wr941n), first enter setup interface, enable wireless function and ssid broadcast, custom the ssid which is the name of this wifi, choose wireless channel. Wifi mode usually...

  • Page 19

    Megapixel ip camera user manual v2.0.0 figure 2.6 click ap, automatically fill information the interface of wifi config as figure 2.7, when use the function of ap search, double-clicking can auto add the configuration of wifi parameter, but if the ap you added enable encrypt, you need enter the righ...

  • Page 20: 2.4 Adsl Setup

    Megapixel ip camera user manual v2.0.0 figure 2.8 the configuration of wifi network to avoid device drops in the case of abnormal, we can enable the function of ping watch dog. Right fill ping ip address, ping time interval, ping maximum timeout and save, then during the operation of the device, it ...

  • Page 21: 2.5 Ddns Setup

    Megapixel ip camera user manual v2.0.0 2.5 ddns setup ddns setup is as figure 2.11. First you must have a domain name. Www.3322.Org is recommended; please remember the username, password and domain name. Then enable ddns, select the ddns server as “3322.Org”. If your domain name is “test.3322.Org”, ...

  • Page 22: 2.7 Ftp Account Setup

    Megapixel ip camera user manual v2.0.0 2.7 ftp account setup ftp account setup is as figure 2.13. First a ftp server is indeed. Then apply a ftp account from the ftp server (username and password). And you must create four directory as “alarm”, “log”, “set”, “update” or other directory name, also yo...

  • Page 23: 2.9 Media Stream Setup

    Megapixel ip camera user manual v2.0.0 mail address. Cc mail address has the same rule with user mail address. Mail subject is the subject of the mail, you can write it by yourself. Figure 2.14 smtp account setup 2.9 media stream setup media stream setup is as figure 2.15. Access protocol: while the...

  • Page 24: 2.11 Pptp Setup

    Megapixel ip camera user manual v2.0.0 figure 2.16 platform setup the device can login platform server on the premise that the server ip and server port is corresponding to the server. The server account and password can enter them wt will. Of course enable login server is indeed. 2.11 pptp setup pp...

  • Page 25: 3 Media

    Megapixel ip camera user manual v2.0.0 3 media 3.1 video capture video capture includes two sides: ircut setting and video capture setup. Ircut has five work modes: active mode, day and night, passive, manual and inverse passive. The working principle of active mode is that it use module to set cont...

  • Page 26: 3.2 Time And Title Setup

    Megapixel ip camera user manual v2.0.0 figure 3.2 video capture setup you can enter number to set the parameter of “brightness”, “saturation”, “sharpness”, “contrast” and “backlight control”; also click “default” is a good method. High “saturation” means color is more obvious; high “contrast” means ...

  • Page 27: 3.3 Video Encode

    Megapixel ip camera user manual v2.0.0 3.3 video encode video encode includes two sides: video encode parameter setup and video encode advanced parameter setup. Video has two streams, one is main stream another is sub stream, the encode format of both are h.264. Main stream of t38r/r2 has three reso...

  • Page 28: 3.4 Picture Capture

    Megapixel ip camera user manual v2.0.0 problem of update slowly, so, if not must, it suggested disabled. Private date: when the video is not smooth, enable it will make this problem be improved. Figure 3.5 video encode advanced parameter setup user could click the button of “default” to set all para...

  • Page 29: 3.6 Media Info

    Megapixel ip camera user manual v2.0.0 figure 3.7 privacy mask setting 3.6 media info in this interface, the main duty is display the status of video encodes. Figure 3.8 media status 24.

  • Page 30: 4 Storage

    Megapixel ip camera user manual v2.0.0 4 storage 4.1 storage manage 4.1.1 uninstall of storage device “uninstall” means remove the storage from the device with a safe way, in order to prevent data been destruct. Choose the storage device that you want to uninstall, click the button of “uninstall”, i...

  • Page 31: 4.2 Storage Setting

    Megapixel ip camera user manual v2.0.0 lose and can’t restoration, so if there is some important date you’d better transfer it to other place. Figure 4.3 if ensure to format storage device? 4.2 storage setting 4.2.1 basic setup the basic setup of storage setting is as figure 4.4. Figure 4.4 basic se...

  • Page 32

    Megapixel ip camera user manual v2.0.0 figure 4.5 motion alarm record motion alarm record: only when it enables others parameters can be changed. Video stream: there are two choices “main stream” and “sub stream”. Main stream has clearer stream, but record same time needs more storage space, so you ...

  • Page 33

    Megapixel ip camera user manual v2.0.0 figure 4.6 motion alarm snap motion alarm snap: only when it enables others parameters can be changed. Pre-capture time: before start snap, camera saves date in temporary buffer. Once start snap, then call those dates, this is the function of pre-capture. The m...

  • Page 34

    Megapixel ip camera user manual v2.0.0 video format: you can just choose avi. Media type: “audio and video” means the record file you will get with sound, so video without sound. But this not means that you choose “audio and video”, you will get record file with sound. The premise is that your camer...

  • Page 35

    Megapixel ip camera user manual v2.0.0 figure4.10 schedule record enable: only when it enables others parameters can be changed. Video stream: there are three choices “main stream”, “sub stream” and “snap picture”. When you choose “main stream” or “sub stream”, you will get record file, or you will ...

  • Page 36

    Megapixel ip camera user manual v2.0.0 1. The record or snap is the function of device that does not depend on network. So, once you enable record or snap, and set parameter in right way, when the device connects with power, it will record or snap according to the configuration. 2. If there is no st...

  • Page 37: 5 Alarm

    Megapixel ip camera user manual v2.0.0 5 alarm 5.1 motion alarm the setting of motion alarm is as figure 5.1. Figure 5.1 motion alarm motion alarm: only when it enables others parameters can be changed. Sensitivity: the sensitivity of motion detection. The value is larger and more easily to create a...

  • Page 38: 5.2 Video Lost Alarm

    Megapixel ip camera user manual v2.0.0 figure 5.2 motion detect alarm schedule the period number is auto create. A period consists of date, start time and end time. After set an alarm time, click the button of “add”, then this alarm time will show in below list. A camera can add twenty-four alarm ti...

  • Page 39: 5.3 Storage Full Alarm

    Megapixel ip camera user manual v2.0.0 at the same time, many parameters need to be configured, as figure 5.5. Alarm output is another way for reminding “video lost”. But you need to enable it and configure parameters for it. Figure 5.5 video lost alarm 5.3 storage full alarm if the camera with stor...

  • Page 40: 6 System Setup

    Megapixel ip camera user manual v2.0.0 6 system setup 6.1 account manage in order to better manage device, we add functions of adding user, modifying user, deleting user and dividing different permission to different user. Figure 6.1 account manage 6.1.1 add user steps of adding a user as follows: f...

  • Page 41

    Megapixel ip camera user manual v2.0.0 when add user the username and password can’t be null, and the password and confirm password must be the same. User group is to limit user privilege: administrator without any limit; operator can change configuration information but can’t view device status inf...

  • Page 42: 6.2 Time Setup

    Megapixel ip camera user manual v2.0.0 6.2 time setup there are two types of update mode in this system. One is “manual”, another is “ntp server”. Ntp server is a protocol that syncs the time of device. It can make device synchronization with the server or clock source, which can provide high precis...

  • Page 43: 6.4 Log File Manage

    Megapixel ip camera user manual v2.0.0 auto backup is to set when device deletes a log file, send this log file to ftp or smtp, achieve this function need you had right configured parameters of ftp or smtp. Figure 6.7 system log setup 6.4 log file manage device supports query, download and delete fu...

  • Page 44

    Megapixel ip camera user manual v2.0.0 the interface of configuration file manage is as figure 6.9, it supports the function of uploading and downloading configuration file. Figure 6.9 configuration file manage when upload configuration file, you need select a file from local computer. While uploadi...

  • Page 45

    Megapixel ip camera user manual v2.0.0 button of “open”, then the file path auto written in the text box which behinds the “firmware file”, click “upgrade” button, update beginning. The firmware update include three stages: first is the upload of firmware file, as figure 6.15; then is firmware upgra...

  • Page 46: 6.6 Regular Maintenance

    Megapixel ip camera user manual v2.0.0 figure 6.15 firmware file uploading the interface of “system restore” is as figure 6.16. It includes two functions: factory default setting and reboot. If device recover to factory default setting, the current configuration information such as ip address, video...

  • Page 47: 6.7 Devices Language

    Megapixel ip camera user manual v2.0.0 6.7 devices language this version supports five languages: simplified chinese, traditional chinese, english, russian and turkish language. Select the language you need, click the button of “save”, then set language successfully. After that, system will auto jum...

  • Page 48: 7 Playback

    Megapixel ip camera user manual v2.0.0 7 playback when device connects with storage device, click the button of “playback” in the main interface, it will come out a dialog of “record file play back”, as figure 7.1. In this interface, we can do operations as search, playback, download and delete for ...

  • Page 49: 7.2 Playback Of File

    Megapixel ip camera user manual v2.0.0 record type divides according to the trigger condition of files. They are motion, schedule and alarm. Media type includes audio and video, only video and picture. The type of “audio and video” with audio date when it record, if the device with audio input, it w...

  • Page 50

    Megapixel ip camera user manual v2.0.0 figure 7.5 record file playing buttons click the button of “play”, then begin playback video file. During this time, the button changes to “pause”. When playing video file, double click the window, video will display in full screen. Clicking the button of “stop...

  • Page 51: 7.3 The Download Of File

    Megapixel ip camera user manual v2.0.0 the window, picture will display in full screen. If select more than one picture, you can switch pictures by buttons of “previous” and “next”, button switches just limit in the selected pictures. When the playing picture is the first one in selected, even there...

  • Page 52

    Megapixel ip camera user manual v2.0.0 figure 7.10 download file when you need download video files or snap pictures to local computer, you can use the function of “download”. After searched files, select one or more, click the button of “download”, come out the dialog as figure 7.10. To achieve the...

  • Page 53: 7.4 The Delete Of File

    Megapixel ip camera user manual v2.0.0 figure 7.13 download complete 7.4 the delete of file when you don’t need a file, you can delete it. Select the file that need deleted, click the button of “delete”, then come out the dialog as figure 7.14, click “ok”, the selected file will be deleted. Once del...