192dmx controller ! User , s manual bank 1 00 turn on turn off cene1 01 turn on turn off ene2 02 turn on turn off scene3 03 turn on turn off scene 4 04 turn on turn off scene5 05 turn on turn off scene6 06 turn on turn off scene7 07 turn on turn off scene8.
Main features 1 . 192dmx channels. 2. 30 banks each composed of 8 programmable scencs. 3.8 fades adjusting output level. 4.Built –in microphone. 5.Auto mode is controllcd by tap sync and speed controlled. 6.Midi control through midi interface. 7.4 digits led display. 8.Fird digit of led shows chases...
30 banks, once only one can be chose. Ⅳ.Scenes can be executed automatically ,and the duration is dependent on tap sync ,scenes are executed under music or note triggering ,also press a scene buttons by hand to run scenes. Ⅴ.There are total 6 chases, each contains240 scenes. You can choose chases. R...
2. Midi running note on: receive note on signals to execute corresponding function. Ⅰ.Select desired chase Ⅱ.Press desired chase while holding auto/del. 5. Clean all chase (all scenes are stil availanble) Ⅰ.Press down +auto /del while turning power off. Ⅱ.Turn the power on. Running scenes ● turn the...
4. Band button (↑or↓) press up or down to increase or decrease bank, the third and fourth digit of led display shows band no.(01-30) 5. Chase 1- chase 6 select ddsired chase to be programmed or run chase. 6. Program t urn the power on ,it is in manual run mode, press program for 2 seeonds, correspon...
Del ,then 10th step is deleted, the previous 11th step turns to the 10th step, the previous 12th step, and so on. 4.Delete a chase.
