Cables To Go 16898 User Manual - page 10
9
D
EVICE
I
NSTALLATION
D
EVICE
I
NSTALLATION
Note: The following is only for Windows 98/ME
Step 1: Turn off your printer. Plug the C36 connector of
the USB to C36 Parallel Adapter into your printer. Turn
on the printer.
Step 2: Turn on your computer and plug in the USB
connector of the USB to C36 Parallel cable into the
USB port.
If you have already installed a printer:
Click Start. Select Settings, Printers. Right-click
the default printer icon and select Properties. The
Properties dialog box will appear.
Click the Details folder tab. Under Print to the
following port select LPT2: (USB to Parallel Port).
If you do not have a printer installed:
Click on Start. Select Settings, Printer, Add Printer.
The Add Printer Wizard will assist you with installing
a new printer device.
Select your printer manufacturer and model name
from the list provided by the wizard or use the
printer driver diskette supplied with your printer.
When the printer Properties dialog box appears,
click the Details tab. Under Print to the following
port, select LPT2: USB to Parallel Port.
Step 3: Follow the instructions to complete the
installation and run a Print Test Page to verify that the
device is working.
I
NSTALACIÓN DEL DISPOSITIVO
Nota: Lo siguiente es sólo para Windows 98/ME
Paso 1: Apague su impresora. Enchufe el conector
C36 del USB al Adaptador Paralelo C36 en su
impresora. Encienda la impresora.
Paso 2: Encienda su equipo y enchufe el conector USB
del cable paralelo USB a C36 en el puerto USB.
Si ya tiene instalada una impresora:
Haga clic en Inicio. Seleccione Configuraciones,
Impresoras. Haga clic derecho en el icono de
impresora por omisión y seleccione Propiedades.
Aparecerá la caja de diálogo de Propiedades.
Haga clic en la pestaña de la carpeta de Detalles.
Bajo Imprimir al siguiente puerto seleccione LPT2:
(USB a Puerto Paralelo).
Si no tiene una impresora instalada:
Haga clic en Inicio. Seleccione Configuraciones,
Impresora, Añadir Impresora. El Asistente de
Instalación de Añadir una Impresora le ayudará a
instalar un nuevo dispositivo de impresión.
Seleccione el fabricante de su impresora y el
nombre del modelo de esta lista proporcionado por
el asistente o utilice el disco flexible que se
suministro junto con su impresora.
Cuando aparece el cuadro de diálogo de
Propiedades de la impresora, haga clic en la
pestaña de Detalles. Bajo Imprimir al siguiente
puerto seleccione LPT2: USB a Puerto Paralelo.
Paso 3: Siga las instrucciones para completar la
instalación e Imprimir una Página de Prueba para
verificar que el dispositivo esté funcionando.
I
NSTALLATION DU PERIPHERIQUE
Remarque : ce qui suit ne concerne que
Windows 98/ME
Étape 1 : éteindre l'ordinateur. Brancher la prise C36 de
l'adaptateur USB/parallèle C36 sur l'imprimante. Mettre
l'imprimante sous tension.
Étape 2 : mettre l'ordinateur sous tension et brancher la
prise USB de l'adaptateur USB/parallèle C36 dans le
port USB.
Si une imprimante est déjà installée :
Cliquer sur Démarrer. Sélectionner Paramètres,
Imprimantes. Cliquer du bouton droit de la souris
sur l'icône d'imprimante par défaut et sélectionner
Propriétés. La boîte de dialogue Propriétés
s'affiche.
Cliquer sur l'onglet Détails. Sous Impression sur les
ports
suivants,
sélectionner
LPT2 :
(port
USB/parallèle).
Si aucune imprimante n'est installée :
Cliquer sur Démarrer. Sélectionner Paramètres,
Imprimante, Ajouter une imprimante. L'assistance
d'ajout d'imprimante donne les instructions pour
installer une nouvelle imprimante.
Sélectionner le fabricant et le nom du modèle de
l'imprimante dans la liste affichée par l'assistant ou
utiliser la disquette de pilote fournie avec
l'imprimante.
Lorsque la boîte de dialogue Propriétés de
l'imprimante s'affiche, cliquer sur l'onglet Détails.
Sous Impression sur les ports suivants, sélectionner
LPT2 : port USB/parallèle.
Étape 3 : suivre les instructions pour terminer
l'installation et exécuter Imprimer une page de test pour
vérifier que le périphérique fonctionne.