Cables To Go 27386 User Manual

Other manuals for 27386: User Manual

Manual is about: 2 Port USB 2.0 PC Card

Page of 12

Download

Print this page

Bookmark us

2 Port USB 2.0 PC Card

User’s Manual

Introduction

The USB 2.0 PC Card allows you to easily add two USB 2.0 ports to your PC or MacIntosh notebook computer.

This 32-bit PC Card’s dual USB 2.0 ports are capable of handling data transfers up to 480Mbps are fully hot-

swappable and daisy-chainable up to 127 devices. Supported under Windows® (98 SE/ME/2000/XP) and Mac®

OS X /9.0.4 and higher, the Port Authority2 PCCard enables your laptop to take advantage of today's high-speed

USB 2.0 devices, including hubs, scanners, printers, PC cameras, digital cameras, keyboards, telephones, and

other USB devices. Download and edit your digital pictures, MP3s, video streams, and data files with the easy to

use USB 2.0 PC Card.

Features:

• Adds two USB 2.0 “A” female ports to your notebook

• Supports 1.5/12/480Mbps transfer rates

• Fully plug-and-play and hot-swap compatible

• Compliant USB Specification Revision 2.0 and backwards compatible with USB 1.1

• Supports Windows 98SE/Me/2000/XP

• 32-bit PC Card/CardBus compliant

• Supports up to 127 devices by daisy-chaining

• VIA

chipset

used.

System Requirements

• Notebook computer with 32-bit Cardbus slot

• Windows® 98SE/ME/2000/XP/Vista

Package Contents

• USB 2.0 Card Bus Adapter

• CD

Driver

• User

Manual

1 2 3 4 5 6 7 Next › »

Summary of 27386

Page 1
1 2 port usb 2.0 pc card user’s manual introduction the usb 2.0 pc card allows you to easily add two usb 2.0 ports to your pc or macintosh notebook computer. This 32-bit pc card’s dual usb 2.0 ports are capable of handling data transfers up to 480mbps are fully hot- swappable and daisy-chainable up ...
Page 2
2 installation driver installation for windows vista 1. Start power to run vista 2. Windows will automatically detect you have a new device the first time you power on your pc and thus request the devices software drivers. 3. Detect you have device to install device software 4. Install the driver “y...
Page 3
3 driver installation for windows xp 1. Please install microsoft windows xp service pack 1 before running the setup program. 2. Make sure usb2.0 cardbus been correctly installed on to the system. 3. Setup.Exe will redirect the user to microsoft windows update for downloading the drivers, please make...
Page 4
4 5. Click “yes” and the setup program will enable the user to connect to the windows update web site. 6. Setup.Exe launches microsoft internet explorer and opens http://windowsupdate.Microsoft.Com . Click on the “scan for updates” to get the latest updates. 7. Microsoft windows update lists all ava...
Page 5
5 driver installation for windows 2000 1. Install service pack 3 or above before running the set up program. 2. Please make sure usb2.0 cardbus has been correctly installed on to the system. 3. Open the device manager and check if there is a “universal serial bus (usb) controller” under “other devic...
Page 6
6 5. The screen shows the “software license agreement”. Please read it first and press “yes” if wish to further proceed the driver installation. 6. Press “next”..
Page 7
7 7. Select “install usb driver” and press “next” 8. The screen shows the microsoft software license agreement. Please read it first and press “yes” if wish to further proceed the driver installation..
Page 8
8 9. Press “ok” 10. Press “print to file”..
Page 9
9 11. Press “ok”. 12. Press “finish” and the microsoft ehci drivers for windows 2000 are now installed successfully. Note: for driver uninstallation, remove the “microsoft usb 2.0 host controller driver” by selecting the “uninstall” button. This will completely remove the driver from the system..
Page 10
10 driver installation for windows 98se/me 1. Please make sure usb2.0 cardbus has been correctly installed on to the system. 2. Open the device manager and check if there is a yellow exclamation mark on any one of the “via tech 3038 pci to usb universal host controller” items. 3. Insert the supplied...
Page 11
11 4. Press “next” 5. Select “install usb driver” and press “next”..
Page 12
12 6. Press “finish” and this will restart the computer system. Please remember to save all files before clicking the “finish” button. Note: for driver uninstallation, the user can remove the “microsoft usb 2.0 host controller driver” by selecting the “uninstall” button. This will completely remove ...