Summary of TV AVS 815
Page 1
C a b l e s e n d e r ( p o w e r s e n d e r t v a v s 8 1 5 ).
Page 2
20 thank you very much. You have acquired an electronic system of a very high technical standard. With the tv avs 815 power transmitter you can transmit colour images with stereo sound through walls and ceilings. The greatest possible care is necessary for bringing it into operations, and that means...
Page 3
21 contents page 1. Safety instructions 22 2. General description 22 3. Transmissions 23 4. The avs 850 power transmitter 24 5. The avs 840 power transmitter 26 6. The rc 815 infra-red remote control for the cable tuner 28 7. Bringing into operation 29 7.1 connecting the avs 850 29 7.2 connecting th...
Page 4: 1. Safety Instructions
1. Safety instructions 2. General description 22 correct and proper use the tv avs 815 power transmitter is designed for use in dry, indoor rooms. The power supply is provided by the mains adapter enclosed with the transmitter. Please only ever use this mains adapter. It is not allowed to alter or m...
Page 5: 3. Transmissions
3. Transmissions 23 if you use the infra-red remote control of another piece of video equipment, these infra-red signals will be passed on via the rx 579 infra- red module to the relevant appliance, such as a satellite-receiver, the audio and video signals of which are being transmitted. In order to...
Page 6
4. The avs 850 power transmitter 24 items included 1 power sender avs 850 power transmitter 1 12 v plug-in mains adapter 1 rx 579 infra-red module 1 cinch/scart connecting cable 1 co-axial branch plug 1 co-axial cable 1 co-axial infra-red remote-control unit for cable tuner 1 aerial adapter control ...
Page 7
25 3. Channel switch the channels can either be selected one behind the other (1,2,3,4,1,2, etc., or the other way round) or set by means of the enclosed infra-red remote-control unit (using the keys txa ... Txd – see point 5). 4. Tv channel selection switch the tv channels can be selected with this...
Page 8: 5. Avs 840 Power Receiver
5. Avs 840 power receiver 26 items included: 1 power avs 840 power receiver 1 9 v plug-in mains adapter 1 cinch/scart connecting cable control elements 1. A/v cinch output sockets 1 video, 2 audio output sockets. These take the received signal and feed it into the receiving unit via the appropriate ...
Page 9
27 4. Channel and switch settings. The avs 840 power receiver can be operated in one of two ways: 1. Permanent reception of a given wireless channel (cable tv or video). 2. Switching between the pre-set wireless channels at pre- determined intervals. This function is necessary when, for instance, th...
Page 10
6. The infra-red remote-control unit for the cable tuner 28 general you need the rc 815 remote-control unit in order to be able to control the cable tuner integrated into the avs 850 power transmitter. The basic code "0000” is set on the remote-control unit when it is delivered. This code can be cha...
Page 11: 7. Bringing Into Operation
7. Bringing into operation 29 1. Insert the cable branch plug "a” into the tv cable socket. 2. Insert the adapter "b” into the aerial socket of the avs 850. 3. Connect the cable branch plug "a” and the aerial input "b” of the avs 850 with the enclosed co-axial cable "c”, using the adapter "b”. 4. Co...
Page 12: 7. Starting Up
7. Starting up 30 carries the video signal and must be inserted into the "video” socket, the red one goes into "audio right”, and the white one into "audio left”. 3. Set one of the channels 1 to 4 at the channel switch. Note. If the avs 850 power transmitter and the avs 840 power receiver are to wor...
Page 13
31 connecting the power receiver to a television set with a video recorder if you would like to feed the av signal into a video recorder, connect the avs 840 power receiver to the av or scart input sockets on the video recorder. You can then record the programme that is being received and/or watch t...
Page 14: 7. Starting Up
7. Starting up 32 7.3 settings on the cable tuner the settings on the cable tuner are made with the rc 815 infra-red remote-control unit from the place where the avs 840 power receiver is set up. Note: the tv avs 815 power transmitter has two separate television programme memories, one for tv channe...
Page 15
33 5. Press the "set” button. 6. Switch on the television set connected to the avs 840 power receiver and select the av input. You will see the lettering "rf id xxx" (xxx represents the code currently set on the rc 815 remote-control unit). 7. Disconnect the mains adapter of the avs 850 from the wal...
Page 16: 8. Operating Possibilities
8. Operating possibilities 34 fine-tuning the tv avs 815 power transmitter the avs 850 power transmitter is able to transmit av signals over a distance of up to 300 metres (line of sight). Any wall or concrete ceiling will represent a slight obstacle, and will thus reduce the transmission range of t...
Page 17
35 extension possibilities with the tv avs 815 power transmitter an avs 815 power transmitter tv set can be extended with a number of avs 840 power receivers. Example: 1 power transmitter to 3 power receivers 1 2 3 4 5 6 on avs 840 power receiver ch t 1 2 3 4 5 6 on avs 840 power receiver ch t 1 2 3...
Page 18: 9. Rectifying A Malfunction
9. Rectifying a malfunction 36 poor transmission quality 1. Reflections of the signal can sometimes affect the transmission quality. Move the power transmitter or receiver away just a few inches and this should solve the problem. 2. Change the channel settings (1 to 4) on the power transmitter and t...
Page 19: 10. Technical Data
10. Technical data 37 power transmitter tv set avs 815 power transmitter avs 850 operating voltage: mains adapter 12 v dc transmitter: 4 channel channel 1 (txa): 2.414 ghz channel 2 (txb): 2.432 ghz channel 3 (txc): 2.450 ghz channel 4 (txd): 2.468 ghz transmitter output: 10 mw range: up to 300 metr...