Cables Unlimited SWB-9000UA User Manual - page 6
5
Keyboard Hot Key Menu
Press [Scroll Lock] twice, and you will hear an audible switching confirmation tone to
ensure you are already in the Hot Key Mode (LED is blinking)
In the Auto Scan mode, the KVM switch remains on one port for 10 seconds before
switching to the next. Please notice that the mouse and keyboard control will be restricted
in the Auto Scan mode.
P.S: Escape from Hot Key Mode, if you don't press any buttons after 4 or 5 seconds.
Note:
This KVM Switch will not detect whether a computer is on or off if the “Power On”
function is set in the Bios. Meaning, when you switch to the computer that is turned
off, there will be nothing displayed on the monitor.
BEEP
Sc ro ll
Lock
X2
: To Hot-Key mode
PS:
Auto scan intervals : 10 seconds.
Leave the Hot Key mode automatically 3 seconds later.
BEEP
BEEP
space bar
Sc ro ll
Lock
X2
S
BEEP
BEEP
BEEP
: End the auto scan
Sc ro ll
Lock
X2
←
→
or
BEEP
BEEP
: To forward/backward port
Sc ro ll
Lock
B
X2
BEEP
Open
→
Close
: Close the buzzer
Close
→
Open
Sc ro ll
Lock
B
X2
BEEP
: Open the buzzer
Sc ro ll
Lock
M
X2
BEEP
BEEP
: Reset Mouse
Sc ro ll
Lock
Sc ro ll
Lock
Sc ro ll
Lock
Sc ro ll
Lock
1
: Switch to PC1 but Audio still with PC2. PC1 LED is blinking.
BEEP
2
BEEP
:Switch to PC2 but Audio still with PC1. PC2 LED is blinking.
F1
BEEP
:Switch computer and Audio to PC1 simultaneously. PC1 LED is solid.
F2
:Switch computer and Audio to PC2 simultaneously. PC 2 LED is solid.
BEEP
X2
X2
X2
X2