Cabletech URZ0158 User manual - 2. Quick Installation
9
Owner’s manual
EN
2. Quick installation
2.1 HDD installation
Hard disk installation must be carried out by technicians to avoid damage to the
equipment and hard disk. The DVR mainframe must be powered off before ope-
ration. This equipment supports hard disk with SATA hard disk interface. Seaga-
te brand hard disk is recommended.
Installation procedures are as follows:
A. Open the equipment and a hard disk support can be seen.
B. Connect the hard disk data and power cable well
C. Put the hard disk into support, and align the hard disk’s screw hole with the
support.
D. Fix the hard disk on the support with screw, and cover the DVR.
Note: the newly fixed hard disk can be served for video recording after format-
ted on the mainframe.
2.2 Boot
Connect the DC 12V/3A power adapter to the power cord socket in back pa-
nel, and press the power button in front panel, the recorder will be on, power in-
dicator “POWER” is on, the monitor will display 4-channel monitoring image. If
non-formatted hard disk exists in the equipment, hard disk formatting informa-
tion will be shown. If boot-record mode is on, or boot time is in the setting time,
the system will start automatic recording function, the “REC” indicator will be on
to indicate the system is working normally.
Note:
1.If hard disk is failed to be installed when DVR mainframe is power on, or the
newly installed hard disk is failed to be formatted on the mainframe, the red “H”
logo will be shown in video pre-view picture.
2.The newly installed hard disk must not be used until formatted in the equip-
ment as follows: Main Menu→HDD→HDD Format. The system will be restarted
after completion of formatting.
2.3 System login
The DVR initial code is 000000 without any password, the user can log in main
menu directly. For better safety of equipment operation, the administrator can
enter system “Basic Settings” – “User Password” to change the code and pas-
sword of this equipment. You can set ordinary user password and administrator
password, the administrator has all the operating privileges, ordinary users only
have limited choices, and they can only monitor and video search / playback
(the mainframe will match automatically when you enter password, and different
permissions will be given according to different passwords).
If you want to operate in mainframe menu after password is set, the system will
display “user login” interface: