1. DL manuals
  2. Cabletron Systems
  3. Switch
  4. 9E423-36
  5. Owner's Manual

Cabletron Systems 9E423-36 Owner's Manual

Other manuals for 9E423-36: User Manual
Manual is about: Ethernet Module

Summary of 9E423-36

  • Page 1

    9031943-03 smartswitch 9000 9e423-36 local management appendix.

  • Page 3: Appendix

    1 appendix 9e423-36 module specific information introduction this appendix contains local management information that is specific to the 9e423-36 ethernet switch module. The 9e423-36 ethernet switch module is a 37-port switching module with: • 36 front panel ethernet ports • 1 internal network bus (...

  • Page 4: Module Interface Codes

    9e423-36 module specific information 2 module interface codes the 9e423-36 ethernet switch module has 41 interfaces. Table 1 lists the identifying number, name, and description of each interface. Table 1. 9e423-36 module interface codes interface number interface name interface description 1 smb1 1 ...

  • Page 5

    3 9e423-36 module specific information use the numbers listed in table 1 to configure the module’s default interface (see the general configuration screen). 24 enet19 ethernet front panel port 19 25 enet20 ethernet front panel port 20 26 enet21 ethernet front panel port 21 27 enet22 ethernet front p...

  • Page 6

    9e423-36 module specific information 4 full duplex configuration screen the full duplex configuration screen (figure 1), displays the port number, operation mode, link status, and port status of the module’s 36 ports (12 ports at a time). Figure 1. Full duplex configuration screen smartswitch 9000 l...

  • Page 7

    5 9e423-36 module specific information full duplex configuration screen fields the following information briefly explains each full duplex configuration screen field. Operation mode (toggle) lets you determine whether the specified port will transmit and receive data separately or simultaneously. Yo...

  • Page 8

    9e423-36 module specific information 6 setting one port to full duplex to set one ethernet port to full duplex (for example, port 1): 1. Use the arrow keys to highlight standard enet in the operation mode field (to the right of port 1). 2. Press the space bar until full duplex appears in the field. ...

  • Page 9: Port Statistics Screen

    7 9e423-36 module specific information port statistics screen the port statistics screen (figure 2), displays information and statistics about the module’s 36 ethernet ports. Figure 2. Port statistics screen smartswitch 9000 local management port statistics module name: 9e423-36 firmware revision: x...

  • Page 10

    9e423-36 module specific information 8 port statistics screen fields the following information briefly explains each port statistics screen field. Port # (read-only) indicates the current port for which statistics are displayed. Octets (read-only) displays the number of octets transmitted and receiv...

  • Page 11

    9 9e423-36 module specific information multicasts (read-only) displays the number of multicasts received. Link status (read-only) displays one of the following values: • link • no link • n/a port type (read-only) displays one of the following values: • aui • bnc • epim-x • mmf sma • mmf st • rj45 • ...

  • Page 12

    9e423-36 module specific information 10 displaying statistics for another port to display statistics for another port: 1. Use the arrow keys to highlight the port # field at the bottom of the screen. 2. Press the space bar to increment (or press the backspace key to decrement) the port number. 3. Pr...

  • Page 13

    11 9e423-36 module specific information smarttrunk configuration screen the smarttrunk configuration screen (figure 3), allows you to logically group interfaces together between devices to achieve greater bandwidth between the devices. Access the smarttrunk configuration screen from the device speci...

  • Page 14

    9e423-36 module specific information 12 smarttrunk configuration screen fields the following information briefly explains each smarttrunk configuration screen field. Port # (read-only) identifies the number of the port. Port name (read-only) these are the names assigned by cabletron systems for all ...

  • Page 15

    13 9e423-36 module specific information displaying the smarttrunk ports there are two smarttrunk screens. Each screen can display up to 12 ports. The next and/or previous command displays at the bottom of the screen, allowing you to navigate to either the next or previous screen. For example, with t...

  • Page 16

    9e423-36 module specific information 14.