1. DL manuals
  2. Cabletron Systems
  3. Network Hardware
  4. 9E428-12
  5. Technical Manual

Cabletron Systems 9E428-12 Technical Manual

Manual is about: Local Management Appendix

Summary of 9E428-12

  • Page 1

    9032034-01 smartswitch 9000 9e428-12/36 and 9e429-12/36 local management appendix.

  • Page 3: Appendix

    1 appendix 9e428-12/36 and 9e429-12/36 module specific information introduction this appendix contains local management information that is specific to the following ethernet modules: • 9e428-12 (12 ports, multimode fiber, st connectors) • 9e428-36 (36 ports, multimode fiber, st connectors) • 9e429-...

  • Page 4: Module Interface Codes

    9e428-12/36 and 9e429-12/36 module specific information 2 modifying fields and user privileges to modify fields on these modules, you must have read-write or super-user privileges. If you have read-only privileges, you can view information; however, you cannot modify any fields. For more information...

  • Page 5

    3 9e428-12/36 and 9e429-12/36 module specific information use the numbers listed in table 1 to configure the module’s default interface (see the general configuration screen). 18 enet13 ethernet front panel port 13 19 enet14 ethernet front panel port 14 20 enet15 ethernet front panel port 15 21 enet...

  • Page 6

    9e428-12/36 and 9e429-12/36 module specific information 4 full duplex configuration screen the 9e428-12/36 and 9e429-12/36 full duplex configuration screen (figure 1), displays the port number, operation mode, link status, and port status of the module’s ports (12 ports at a time). Figure 1. 9e428-1...

  • Page 7

    5 9e428-12/36 and 9e429-12/36 module specific information full duplex configuration screen fields the following information briefly explains each full duplex configuration screen field. Operation mode (modifiable) indicates whether the specified port will transmit and receive data separately or simu...

  • Page 8

    9e428-12/36 and 9e429-12/36 module specific information 6 displaying information about other ports to display information about other ports: 1. Use the arrow keys to highlight one of the following fields (located at the bottom of the full duplex configuration screen): • [1-12] (for the first 12 port...

  • Page 9: Switch Configuration Screen

    7 9e428-12/36 and 9e429-12/36 module specific information switch configuration screen the 9e428-12/36 and 9e429-12/36 switch configuration screen (figure 2), provides basic setup options for making a switch operational in your network. Figure 2. 9e428-12/36 and 9e429-12/36 switch configuration scree...

  • Page 10

    9e428-12/36 and 9e429-12/36 module specific information 8 switch configuration screen fields the following information briefly explains each switch configuration screen field. Type of sta (toggle) allows you to set the method that switches use to decide which switch is the controlling (root) switch ...

  • Page 11

    9 9e428-12/36 and 9e429-12/36 module specific information status (toggle) allows you to set the forwarding status of the listed interface (either enabled or disabled). Press the space bar to toggle to the desired value. Valid entries are: • enabled • disabled displaying other ports to display other ...

  • Page 12: Port Statistics Screen

    9e428-12/36 and 9e429-12/36 module specific information 10 port statistics screen the 9e428-12/36 and 9e429-12/36 port statistics screen (figure 3), displays information and statistics about the module’s ethernet ports. Figure 3. 9e428-12/36 and 9e429-12/36 port statistics screen smartswitch 9000 lo...

  • Page 13

    11 9e428-12/36 and 9e429-12/36 module specific information port statistics screen fields the following information briefly explains each port statistics screen field. Port # indicates the current port for which statistics are displayed. Octets displays the number of octets transmitted and received. ...

  • Page 14

    9e428-12/36 and 9e429-12/36 module specific information 12 multicasts displays the number of multicasts received. Link status indicates whether there is a physical connection from this port to another 10base- fl device. One of the following values appears: • link - there is a 10base-fl link signal p...

  • Page 15

    13 9e428-12/36 and 9e429-12/36 module specific information port # (modifiable) selects the port for which statistics are to be displayed. Displaying statistics for another port to display statistics for another port: 1. Use the arrow keys to highlight the port # field at the bottom of the screen. 2....

  • Page 16: System Resources Screen

    9e428-12/36 and 9e429-12/36 module specific information 14 system resources screen the 9e428-12/36 and 9e429-12/36 system resources screen (figure 4), displays information about current and available resources on the module. Figure 4. 9e428-12/36 and 9e429-12/36 system resources screen smartswitch 9...

  • Page 17

    15 9e428-12/36 and 9e429-12/36 module specific information system resources screen fields the following information briefly explains each system resources screen field. Flash memory installed/available displays the size of flash memory and indicates how many bytes are currently available. Dram insta...

  • Page 18

    9e428-12/36 and 9e429-12/36 module specific information 16.