Cabletron Systems DIGITAL MultiSwitch 700 DLE22-MA User Manual
Summary of DIGITAL MultiSwitch 700 DLE22-MA
Page 1
Digital multiswitch 700 dle22-ma, dle32-ma, dle23-ma, and dle33-ma interface modules user’s guide.
Page 3
Digital multiswitch 700 dle22-ma, dle32-ma, dle23-ma, and dle33-ma interface modules user’s guide part number: 9032627 september 1998 this manual describes how to use the dle22-ma, dle23-ma, dle32-ma, and dle33-ma multiswitch 700 modules. Revision/update information: this is a new document..
Page 4
Cabletron systems reserves the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult cabletron systems to determine whether any such changes have been made. The hardware, firmware, or software described i...
Page 5
Fcc notice — class a computing device: this equipment generates, uses, and may emit radio frequency energy. The equipment has been type tested and found to comply with the limits for a class a digital device pursuant to part 15 of fcc rules, which are designed to provide reasonable protection agains...
Page 6
Cabletron systems, inc. Program license agreement important: before utilizing this product, carefully read this license agreement. This document is an agreement between you, the end user, and cabletron systems, inc. (“cabletron”) that sets forth your rights and obligations with respect to the cablet...
Page 7
Safety information class 1 laser transceivers the delf3-ui fast ethernet interface module, del05-ui fddi port interface module, and del29-ui atm port inter- face module use class 1 laser transceivers. Read the following safety information before installing or operating these modules. The class 1 las...
Page 8
Declaration of conformity application of council directive(s): 89/336/eec 73/23/eec manufacturer’s name: cabletron systems, inc. Manufacturer’s address: 35 industrial way po box 5005 rochester, nh 03867 european representative name: mr. J. Solari european representative address: cabletron systems li...
Page 9: Contents
Dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide vii contents preface using this guide .......................................................................... Xiii intended audience ........................................................................ Xiii structure of this guide...........
Page 10
Contents viii dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 2.2 10base-t network ......................................................................2-2 2.3 100base-tx network .................................................................2-2 2.4 100base-fx fiber optic network ............
Page 11
Contents dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide ix 5.7.3 setting the chassis date .............................................. 5-18 5.7.4 setting the chassis time .............................................. 5-19 5.7.5 entering a new screen refresh time .............................
Page 12
Contents x dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 5.19.1 setting the operation mode ..........................................5-62 5.20 smarttrunk and the configuration screen .................................5-63 5.20.1 smarttrunk configuration rules ...................................
Page 13
Contents dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide xi appendix a specifications a.1 device specifications ..................................................................A-1 a.2 physical properties ......................................................................A-1 a.3 environme...
Page 15: Preface
Dle22-ma, dle32-ma, dle23-ma, and dle33-ma user’s guide xiii preface welcome to the digital multiswitch 700 dle22-ma, dle32-ma, dle23-ma, and dle33-ma interface modules user’s guide . This guide provides information concerning network requirements, installation, and the use of local management. It a...
Page 16: Document Conventions
Preface xiv dle22-ma, dle32-ma, dle23-ma, and dle33-ma user’s guide chapter 4, troubleshooting, details the dle2x-ma and dle3x-ma lanview leds that enable you to quickly diagnose network/operational problems. Chapter 5, local management, describes how to access local management and use the local man...
Page 17: Related Documentation
Related documentation dle22-ma, dle32-ma, dle23-ma, and dle33-ma user’s guide xv related documentation the following manuals may help the user to set up and manage the dle2x-ma and dle3x-ma: • digital multiswitch 700 port based vlan user’s guide • digital atm modular interface delha-ua user’s guide ...
Page 18: Getting Help
Preface xvi dle22-ma, dle32-ma, dle23-ma, and dle33-ma user’s guide getting help contact your digital representative for technical support. Before calling, have the following information ready: • a description of the failure • a description of any action(s) already taken to resolve the problem (e.G....
Page 19: Safety
Dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide xvii safety overview any warning or caution that appears in this manual is defined as follows: warning warns against an action that could result in equipment damage, personal injury, or death. Vorsicht enthält informationen, die beachtet werden ...
Page 20: Safety Requirements
Safety xviii dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide safety requirements the warnings or cautions that must be observed for the hardware described in this manual are listed below in english, german, french, and spanish. Warning only qualified personnel should install this unit. Vorsic...
Page 21
Safety requirements dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide xix danger delf3-ui utilise les lasers de la classe 1. N'utilisez pas d'instruments d'optique pour voir la sortie du laser. Leur usage augmente les risques de lésions oculaires. Lorsque vous voyez le port optique de la sortie...
Page 22
Safety xx dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide caution failure to observe static safety precautions could cause damage to the dle22-ma and dle23-ma and dle32-ma and dle33-ma. Follow static safety handling rules and properly wear the antistatic wrist strap provided with the dlm6c-aa...
Page 23
Safety requirements dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide xxi precauciÓn si no se observan las precauciones de seguridad estática, se pueden dañar dle22-ma y dle23-ma y dle 32-ma y dle33-ma. Siga las reglas de transporte de seguridad estática y utilice de manera adecuada la banda an...
Page 24
Safety xxii dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide caution an odd number of crossovers (preferably one) must be maintained between devices so that the transmit port of one device is connected to the receive port of the other device and vice versa. If the fiber optic cable being used ...
Page 25
Safety requirements dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide xxiii precauciÓn un número impar de diagonales (de preferencia uno) se debe mantener entre los dispositivos para que el puerto de transmisión de un dispositivo esté conectado al puerto de recepción del otro dispositivo y vice...
Page 26
Safety xxiv dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide precauciÓn no toque los extremos de las bandas de fibra óptica y, no permita que los contactos estén en contacto con polvo, suciedad u otros contaminantes. La contaminación de los extremos causa problemas en la transmisión de datos. ...
Page 27
Safety requirements dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide xxv achtung bevor sie die einstellungen des com-ports ändern, stellen sie sicher, daß für das modul oder das gehäuse eine gültige ip-adresse eingestellt ist. Lesen sie den gesamten abschnitt zur com-port-konfiguration, bevor ...
Page 28
Safety xxvi dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide precauciÓn no desactive ni cambie los parámetros del puerto com mientras esté operando la conexión actual de gestión local local management (lm) a través de un terminal. Si lo hace, se desconectará el terminal lm del puerto, y se ter...
Page 29
Safety requirements dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide xxvii attention si vous sortez sans enregistrer, le message "not saved - press save to keep changes" (non enregistré - appuyez sur save pour conserver les modifications) s'affiche. Toutes vos modifications seront perdues. Pre...
Page 30
Safety xxviii dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide attention lorsque le port com est configuré pour une application ups, toute future connexion local management doit se faire en établissant une connexion telnet au module. Assurez-vous que celui-ci possède une adresse ip valable ava...
Page 31
Safety requirements dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide xxix caution if the dle2x-ma and dle3x-ma are being bridged to an fddi ring (for example, via an delhf-ua installed in the dle3x-ma) ip fragmentation should be enabled. If ip fragmentation is disabled, all fddi frames that ex...
Page 32
Safety xxx dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide caution the fast ethernet interface module and the host module are sensitive to static discharges. Use an antistatic wrist strap and observe all static precautions during this procedure. Failure to do so could damage the fast ethernet...
Page 33
Safety requirements dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide xxxi precauciÓn al instalar un módulo delfx-ui o delf3-ui en el módulo de host, retire el enchufe de caucho del conector sc antes de continuar. Caution when inserting the fast ethernet interface module into the motherboard co...
Page 35: Chapter 1
Dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 1-1 chapter 1 introduction this chapter describes the features of the dle2x-ma and dle3x-ma interface modules. 1.1 dle2x-ma and dle3x-ma overview the dle2x-ma and dle3x-ma, shown in figure 1-1, are interface modules for the dlm6c-aa chassis. The...
Page 36
Chapter 1: introduction 1-2 dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide figure 1-1 the dle22-ma and dle32-ma 1 2 14 13 com cpu 3 4 5 6 7 8 9 10 11 12 15 16 17 18 19 20 21 22 23 24 dle32-ma ethernet 1 2 14 13 25 26 com cpu 3 4 5 6 7 8 9 10 11 12 15 16 17 18 19 20 21 22 23 24 dle22-ma ether...
Page 37: 1.1.1
Dle2x-ma and dle3x-ma overview dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 1-3 1.1.1 connectivity the dle22-ma and dle32-ma connect to ethernet networks or workstations through 24 rj45 ports on the front panel. These ports support utp connections up to 100 meters. The ports are ieee 802.3...
Page 38: 1.1.4
Chapter 1: introduction 1-4 dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 1.1.4 management management of the dle2x-ma and dle3x-ma is accomplished using local management tools or remote snmp management stations. Local management is accessible through the rs232 com port on the front panel us...
Page 39: 1.1.8
Dle2x-ma and dle3x-ma overview dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 1-5 1.1.8 year 2000 compliant the dle2x-ma and dle3x-ma have an internal clock that can maintain the current time and date beyond the year 1999. 1.1.9 runtime ip address discovery this feature enables the modules t...
Page 40: 1.2
Chapter 1: introduction 1-6 dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide • designate workstations to receive snmp traps from the dle2x-ma and dle3x-ma interface modules and the dlm6c-aa chassis. • configure module specific snmp mib objects including the ietf bridge mib objects. Chapter 5 p...
Page 41: Chapter 2
Dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 2-1 chapter 2 network requirements before installing the dle2x-ma and dle3x-ma or fast ethernet interface modules (deltx-ui, delfx-ui, or delf3-ui), review the requirements and specifications referred to in this chapter concerning the following:...
Page 42: 2.2
Chapter 2: network requirements 2-2 dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 2.2 10base-t network when connecting a 10base-t segment to any of the dle2x-ma and dle3x-ma ports (interfaces 1 through 24), ensure that the network meets the ethernet network requirements of the ieee 802.3 st...
Page 43: Chapter 3
Dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 3-1 chapter 3 installation this chapter covers the following items: • required tools • unpacking the dle2x-ma and dle3x-ma • installing the dle2x-ma and dle3x-ma into the dlm6c-aa chassis • connecting to the network 3.1 required tools a phillips...
Page 44: 3.3
Chapter 3: installation 3-2 dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 3.3 dle2x-ma and dle3x-ma options if the dle2x-ma is to be installed with an optional fast ethernet interface module, refer to appendix c for installation instructions. The installation instructions for the hsims avai...
Page 45
Installing the dle2x-ma and dle3x-ma into the dlm6c-aa chassis dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 3-3 4. Remove the module from the plastic bag. (save the bag in the event the module must be reshipped.) observe all precautions to prevent damage from electrostatic discharge (esd)....
Page 46
Chapter 3: installation 3-4 dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide figure 3-1 installing an interface module 1 2 3 4 5 ps1 ps2 plastic locking tab plastic locking tab slot number circuit card card guides metal back-panel multiswitch 700 tm tm dlm6c-aa h3105-aa tm ha205-aa tm ha205-aa...
Page 47: 3.5
Connecting to the network dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 3-5 3.5 connecting to the network this section provides the procedures for connecting segments from the network or other devices to the modules. Ports 1 through 24 on the dle22-ma and dle32-ma have rj45 connectors for t...
Page 48: 3.5.1
Chapter 3: installation 3-6 dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 3.5.1 connecting utp cables to ports 1 through 24 of the dle22-ma and dle32-ma ports 1 through 24 of the dle22-ma and dle32-ma are 10base-t ports with internal crossovers. When connecting a workstation, use a straight...
Page 49
Connecting to the network dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 3-7 3. Verify that a link exists by checking that the port rx led is on (flashing amber, blinking green, or solid green). If the rx led is off, perform the following steps until it is on: a. Verify that the 10base-t dev...
Page 50: 3.5.2
Chapter 3: installation 3-8 dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 3.5.2 connecting utp cables to ports 1 through 24 of the dle33-ma and dle23-ma when facing the front panel of the dle33-ma or dle23-ma, the upper rj21 is the connector for 10base-t ports 1 through 12. The lower rj21 i...
Page 51
Connecting to the network dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 3-9 figure 3-5 connection using the rj21 angle adapter 3. Tighten the two screws on the rj21 connector or rj21 angle adapter, as applicable, to secure it to the module. 4. If using the rj21 angle adapter, plug the 25 pa...
Page 52: 3.5.3
Chapter 3: installation 3-10 dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide b. Verify that the rj21 connectors on the twisted pair segment have the proper pinouts and check the cable for continuity. C. Check that the twisted pair connection meets the db loss and cable specifications outlined...
Page 53
Connecting to the network dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 3-11 figure 3-6 deltx-ui crossover switch connect an deltx-ui to a twisted pair segment as follows: 1. Ensure that the device connected to the other end of the segment is powered on. 2. Connect the twisted pair segment ...
Page 54: 3.5.4
Chapter 3: installation 3-12 dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 3.5.4 connecting a fiber optic segment to the delfx-ui and delf3-ui the delfx-ui and delf3-ui have an sc style network port (see figure 3-7). Cabletron systems supplies fiber optic cable that uses sc style connectors...
Page 55
Connecting to the network dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 3-13 figure 3-7 delfx-ui and delf3-ui port 4. Verify that a link exists by checking that the port rx led is on (flashing amber, blinking green, or solid green). If the rx led is off and the tx led is not blinking amber,...
Page 56: 3.6
Chapter 3: installation 3-14 dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide c. Verify that the fiber connection meets the db loss specifications outlined in chapter 2. If a link has not been established, contact your digital representative. 3.6 completing the installation the dle2x-ma and dl...
Page 57: Chapter 4
Dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 4-1 chapter 4 troubleshooting this chapter provides information concerning the following: • using the lanview diagnostic and status monitoring system • troubleshooting network and module operational problems • using the reset button 4.1 using la...
Page 58
Chapter 4: troubleshooting 4-2 dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide figure 4-1 lanview leds 1 2 14 13 25 26 com cpu 3 4 5 6 7 8 9 10 11 12 15 16 17 18 19 20 21 22 23 24 dle22-ma ethernet cpu led lkg-10870-98f receive (rx) transmit (tx).
Page 59
Using lanview dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 4-3 table 4-1 lanview leds led color state recommended action cpu off power off. Power up chassis. Red blinking. Hardware failure has occurred. Contact your digital representative. Solid. Resetting, normal power up reset. No action...
Page 60: 4.2
Chapter 4: troubleshooting 4-4 dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 4.2 deltx-ui led the optional deltx-ui has one led labeled 10/100. The 10/100 led together with the receive led allows the user to determine the link status and the operating speed of the fast ethernet interface mo...
Page 61
Deltx-ui led dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 4-5 figure 4-2 deltx-ui led table 4-3 deltx-ui led indications when the rx led is off a link exists if the associated port (port 25 or 26) receive (rx) led is on. Table 4-2 deltx-ui led indications when the rx led is on led color de...
Page 62: 4.3
Chapter 4: troubleshooting 4-6 dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 4.3 troubleshooting checklist if the dle2x-ma or dle3x-ma is not working properly, refer to table 4-4 for a checklist of possible problems, causes, and recommended actions to resolve the problem. Table 4-4 troubles...
Page 63: 4.4
Using the reset button dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide 4-7 4.4 using the reset button the reset button located near the upper plastic locking tab of the module (refer to figure 4-3) resets the dle2x-ma and dle3x-ma processor without affecting the nvram. Figure 4-3 reset button...
Page 65: Chapter 5
Dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-1 chapter 5 local management this chapter explains how to set up a management terminal to access dle2x-ma and dle3x-ma local management. It also explains how to use the local management screens and commands. 5.1 overview local management for the...
Page 66: 5.2
Chapter 5: local management 5-2 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide • configure the fast ethernet interface modules of the dle2x-ma and the hsim of the dle3x-ma. There are three ways to access local management: • locally using a vt type terminal connected to the com port of the dle3...
Page 67: 5.3
Management terminal setup dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-3 5.3 management terminal setup use one of the following systems to access local management: • an ibm or compatible pc running a vt series emulation software package • a digital equipment corporation vt100 type terminal...
Page 68: 5.3.2
Chapter 5: local management 5-4 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide figure 5-1 management terminal connection 5.3.2 connecting an uninterruptible power supply (ups) if the dlm6c-aa chassis is connected to an american power conversion (apc) ups for protection from a loss of power, a ...
Page 69
Management terminal setup dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-5 2. Plug the rj45 connector at the other end of the cable into the rj45-to-db9 male (ups) adapter, cabletron systems part no. 9372066. 3. Connect the rj45-to-db9 male (ups) adapter to the female db9 port on the rear of...
Page 70: 5.3.3
Chapter 5: local management 5-6 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5.3.3 management terminal setup parameters table 5-2 lists the setup parameters for the local management terminal. Table 5-2 vt terminal setup display setup menu columns -> controls -> auto wrap -> scroll -> text cu...
Page 71: 5.3.4
Accessing local management dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-7 5.3.4 telnet connections once the module or chassis has a valid ip address, the user can establish a telnet session with local management from any tcp/ip based node on the network. Telnet connections to the dle2x-ma ...
Page 72
Chapter 5: local management 5-8 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide figure 5-3 local management password screen 2. Enter the password and press enter. The default super-user access password is “public” or press enter. • if an invalid password is entered, the terminal beeps and the c...
Page 73: 5.4.1
Accessing local management dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-9 5.4.1 navigating local management screens the dle2x-ma and dle3x-ma local management application consists of a series of menu screens. Navigate through local management by selecting items from the menu screens. The d...
Page 74
Chapter 5: local management 5-10 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide \ figure 5-4 802.1d switching mode, lm screen hierarchy figure 5-5 802.1q switching mode, lm screen hierarchy module menu password main menu snmp community names chassis menu general configuration snmp traps chassi...
Page 75: 5.4.2
Accessing local management dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-11 5.4.2 selecting local management menu screen items select items on a menu screen by performing the following steps: 1. Use the arrow keys to highlight a menu item. 2. Press enter. The selected menu item displays on ...
Page 76: 5.5
Chapter 5: local management 5-12 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5.5 the main menu screen the main menu screen is the access point for all local management screens for the module and the dlm6c-aa chassis. Figure 5-6 shows the main menu screen. Figure 5-6 main menu screen the fol...
Page 77: 5.6
Chassis menu screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-13 modules the modules menu item provides access to the module selection screen that is used to select individual modules in the chassis for management purposes. Access the module selection screen by using the arrow keys to h...
Page 78: 5.7
Chapter 5: local management 5-14 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide chassis configuration the chassis configuration screen allows the user to configure operating parameters for the dlm6c-aa chassis. For details, refer to section 5.7. Snmp community names the snmp community names sc...
Page 79
Chassis configuration screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-15 menu item and pressing enter. The chassis configuration screen, figure 5-8, displays. Figure 5-8 chassis configuration screen the following briefly explains each chassis configuration screen field: mac address (re...
Page 80
Chapter 5: local management 5-16 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide subnet mask (modifiable) displays the subnet mask for the chassis. A subnet mask “masks out” the network bits of the ip address by setting the bits in the mask to 1 when the network treats the corresponding bits in...
Page 81: 5.7.1
Chassis configuration screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-17 application terminates the session, and the display returns to the password screen. To enter a new lockout time, refer to section 5.7.6. Chassis uptime (read-only) displays the total time the chassis has been oper...
Page 82: 5.7.2
Chapter 5: local management 5-18 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5.7.2 setting the subnet mask if the management workstation that is to receive snmp traps from the dlm6c-aa is located on a separate subnet, the subnet mask for the dlm6c-aa must be changed from its default. To cha...
Page 83: 5.7.4
Chassis configuration screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-19 3. Press enter to set the system calendar to the date in the input field. 4. Use the arrow keys to highlight the save command at the bottom of the screen and press enter. If the date entered is a valid format, the...
Page 84: 5.7.5
Chapter 5: local management 5-20 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5.7.5 entering a new screen refresh time the screen refresh time is set from 3 to 99 seconds with a default of 3 seconds. To set a new screen refresh time, perform the following steps: 1. Use the arrow keys to high...
Page 85: 5.7.7
Chassis configuration screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-21 5.7.7 setting the operational mode to set the operational mode, proceed as follows: 1. Use arrow keys to highlight the operational mode field. 2. Press the space bar to step to the appropriate operation mode, (802...
Page 86: 5.8
Chapter 5: local management 5-22 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5.8 snmp community names screen the snmp community names menu item allows the user to set local management community names. Community names act as passwords to local/remote management and provide security access to...
Page 87
Snmp community names screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-23 figure 5-10 snmp community names screen the following explains each snmp community names screen field: community name (modifiable) displays the user-defined name through which a user accesses dlm6c-aa management. A...
Page 88: 5.8.1
Chapter 5: local management 5-24 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide super-user this community name permits read-write access to the dlm6c-aa mib objects and allows the user to change all modifiable parameters including community names, ip addresses, traps, and snmp objects. 5.8.1 e...
Page 89: 5.9
Snmp traps screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-25 5.9 snmp traps screen since the dlm6c-aa is an snmp compliant device, it can send messages to multiple network management stations to alert users of status changes. The snmp traps screen is shown in figure 5-11. Access the s...
Page 90: 5.9.1
Chapter 5: local management 5-26 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide enable traps (toggle) enables transmission of the traps to the network management station with the associated ip address. This field toggles between [yes] and [no]. 5.9.1 configuring the trap table to configure the...
Page 91
Chassis environmental screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-27 environmental menu item and pressing enter. The chassis environmental information screen, figure 5-12, displays. Figure 5-12 chassis environmental information screen the following describes each of the chassis env...
Page 92: 5.11
Chapter 5: local management 5-28 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5.11 port redirect function screen the port redirect function screen, figure 5-13, allows the user to set each one of the modules in the chassis (1 through 5), and the ports of the corresponding module installed, a...
Page 93
Port redirect function screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-29 figure 5-13 port redirect function screen the following definitions briefly explain each field of the port redirect function screen. Source module (read-only) displays which modules are currently set as source mo...
Page 94: 5.11.1
Chapter 5: local management 5-30 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide source port [ n ] (selectable) allows a selected port [n] to be configured as a source port. Destination module [ n ] (selectable) allows a selected module [n] to be configured as a destination module. Destination ...
Page 95: 5.12
Module selection screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-31 3. Use the arrow keys to highlight the source port field. 4. Press the space bar or backspace one or more times to increment or decrement the port number displayed in the brackets [n] until the appropriate port number ...
Page 96
Chapter 5: local management 5-32 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide figure 5-14 module selection screen the following explains each module selection screen field as shown in figure 5-14. Module # the module # field displays the slot in which the module is installed. The module numb...
Page 97: 5.12.1
Module menu screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-33 5.12.1 selecting a module to select an individual module to perform local management functions, proceed as follows: 1. Use the arrow keys to highlight the desired module number in the module # field. 2. Press enter, the app...
Page 98
Chapter 5: local management 5-34 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide figure 5-15 module menu screen the following explains each module menu screen field as shown in figure 5-15: module configuration the module configuration screen provides access to the local management screens that...
Page 99: 5.14
Module configuration menu screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-35 network tools the network tools function resides on the dle2x-ma and dle3x-ma and consists of a series of commands that allow the user to access and manage network devices. Section 5.31 explains how to use the...
Page 100
Chapter 5: local management 5-36 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide the following briefly explains each screen accessible from the module configuration menu screen: general configuration the general configuration screen allows the user to monitor and configure operating parameters ...
Page 101: 5.15
General configuration screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-37 5.15 general configuration screen the general configuration screen, figure 5-17, allows the user to set the system date and time, ip address and subnet mask, the default gateway, the tftp gateway ip address, the o...
Page 102
Chapter 5: local management 5-38 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide ip address (modifiable) this display allows the ip address to be set for the dle2x-ma and dle3x-ma. To set the ip address, refer to section 5.15.1. Subnet mask (modifiable) displays the subnet mask for the module. ...
Page 103
General configuration screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-39 screen lockout time (modifiable) contains the maximum number of minutes that the local management application displays a module’s screen while awaiting input or action from a user. For example, if the number 5 is ...
Page 104: 5.15.1
Chapter 5: local management 5-40 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide module to which the user may wish to restrict access. Section 5.15.10 describes how to set the management mode. Com (toggle) this field allows the user to enable or disable the com port. The selection toggles betwe...
Page 105
General configuration screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-41 1. Use the arrow keys to highlight the ip address field. 2. Enter the ip address into this field using decimal dotted notation (ddn) format. For example: 134.141.79.120 3. Press enter. If the ip address is a valid...
Page 106: 5.15.2
Chapter 5: local management 5-42 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5. Use the arrow keys to highlight the yes command and press enter. The changes are saved and the module reboots. 5.15.2 setting the subnet mask if the management workstation that is to receive snmp traps from the ...
Page 107: 5.15.4
General configuration screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-43 3. Press enter. If the default gateway entered is a valid format, the cursor returns to the beginning of the default gateway field. If the entry is not valid, the event message line displays “invalid default gatew...
Page 108: 5.15.6
Chapter 5: local management 5-44 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 1. Use the arrow keys to highlight the module date field. 2. Enter the date in an mm/dd/yyyy format. 3. Press enter to set the system calendar to the date in the input field. 4. Use the arrow keys to highlight the ...
Page 109: 5.15.7
General configuration screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-45 3. Press enter to set the system clock to the time in the input field. 4. Use the arrow keys to highlight the save command at the bottom of the screen and press enter. If the time entered is a valid format, the ev...
Page 110: 5.15.9
Chapter 5: local management 5-46 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide if the time entered is within the 1 to 30 minutes range, the event message line at the top of the screen displays “saved ok”. If the entry is not valid, local management does not alter the current setting, but it d...
Page 111
General configuration screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-47 2. Use the space bar to toggle the options (distributed or stand alone) until the desired mode displays. 3. Use the arrow keys to highlight the save command, then press enter. The warning screen shown in figure 5-...
Page 112
Chapter 5: local management 5-48 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide management or ups applications. Select disabled if you wish to disable the com port for additional module security. Figure 5-19 com port warning screen 3. Use the arrow keys to highlight yes. Press enter. 4. If you...
Page 113
General configuration screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-49 5.15.12 changing the com port application after enabling the com port as described in section 5.15.11, you can select one of the applications supported by the com port: lm, and ups. The default application is lm. ...
Page 114: 5.15.13 Clearing Nvram
Chapter 5: local management 5-50 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5.15.13 clearing nvram clearing nvram allows the user to clear all user-entered parameters, such as ip address and community names from nvram. Clear nvram as follows: 1. Use the arrow keys to highlight the clear nv...
Page 115: 5.16
Snmp community names screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-51 the dle2x-ma and dle3x-ma clear nvram and reboot. All user-entered parameters default to factory settings. 5.15.14 enabling/disabling ip fragmentation to enable or disable ip fragmentation, proceed as follows: 1. U...
Page 116
Chapter 5: local management 5-52 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide access the snmp community names screen from the module configuration menu screen by using the arrow keys to highlight the snmp community names menu item and pressing enter. The snmp community names screen, figure 5...
Page 117: 5.16.1
Snmp community names screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-53 read-write this community name allows read and write access to the dle2x-ma and dle3x-ma mib objects, excluding security protected fields for super-user access only. Super-user this community name permits read-writ...
Page 118: 5.17
Chapter 5: local management 5-54 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5.17 snmp traps screen since the dle2x-ma and dle3x-ma are snmp compliant devices, they can send messages to multiple network management stations to alert users of status changes. The snmp traps screen is shown in ...
Page 119: 5.17.1
Switch configuration screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-55 trap destination (modifiable) indicates the ip address of the workstation to receive trap alarms. Up to eight different destinations can be defined. Trap community name (modifiable) displays the community name incl...
Page 120
Chapter 5: local management 5-56 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide the switch configuration screen, figure 5-23, provides the basic setup options to make a switch operational in your network. Access the switch configuration screen from the module configuration menu screen by using...
Page 121
Switch configuration screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-57 figure 5-23 switch configuration screen the following describe each field of the switch configuration screen: switch address (read-only) displays the base mac address of the switch. Number of ports (read-only) disp...
Page 122: 5.18.1
Chapter 5: local management 5-58 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide time specified in the age time field. To change the age time field from the default value of 300 seconds, refer to section 5.18.2. Port # (read-only) lists each switch port on the module. If the number of ports is ...
Page 123: 5.18.2
Switch configuration screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-59 2. Use the space bar to step to the appropriate setting (ieee, dec, or none). 3. Use the arrow keys to highlight the save command at the bottom of the screen. 4. Press enter. The message “saved ok” is displayed. 5....
Page 124: 5.19
Chapter 5: local management 5-60 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5.19 ethernet full duplex configuration screen the ethernet full duplex configuration screen, figure 5-24, allows the user to set ports 1 through 24 for either standard ethernet or full duplex operation and monitor...
Page 125
Ethernet full duplex configuration screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-61 the following section explains each field of the ethernet full duplex configuration screen. Port # (read-only) identifies the number of the port. Operation mode (toggle) allows the user to set the spe...
Page 126: 5.19.1
Chapter 5: local management 5-62 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide set all ports (toggle) ports 1 through 24 can be set all at once to either standard or full from this field. To set all ports, refer to section 5.19.1. [1-12],or [13-24] (navigation key) when the full duplex config...
Page 127: 5.20
Smarttrunk and the configuration screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-63 2. Press the space bar until you see full or standard. 3. Use the arrow keys to highlight the save command on the bottom line of the screen. 4. Press enter. The message “saved ok” is displayed. 5.20 sma...
Page 128: 5.20.2
Chapter 5: local management 5-64 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 6. You must enable spanning tree before enabling smarttrunk. Spanning tree will ‘block’ any ports not used by smarttrunk that are looped. This can include network and user ports. The reason for the blocking of a ne...
Page 129
Smarttrunk and the configuration screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-65 smarttrunk configuration menu item and pressing enter. The smarttrunk configuration screen displays. Figure 5-25 smarttrunk configuration screen the following explains each field of the smarttrunk confi...
Page 130: 5.20.3
Chapter 5: local management 5-66 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide port name these are the names assigned for all bridging interfaces. Connection (toggle) enables the connection type for the interface. This field toggles between user and network. User is not used for load sharing;...
Page 131: 5.20.4
Module specific configuration menu screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-67 5.20.4 displaying the smarttrunk ports there are three smarttrunk screens. Each screen displays 12 ports. The next and/or previous command is displayed at the bottom of the screen, allowing the user t...
Page 132
Chapter 5: local management 5-68 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide figure 5-26 module specific configuration menu screen the following explains each field of the module specific configuration menu screen: system resources the system resources screen displays the amount of flash me...
Page 133
Module specific configuration menu screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-69 the high speed configuration screen for the dle3x-ma allows management of the installed hsim. For details, refer to the applicable hsim user’s guide. Flash download the flash download screen allows th...
Page 134: 5.22
Chapter 5: local management 5-70 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5.22 system resources screen the system resources screen, figure 5-27, provides information concerning the processor, the amount of flash memory, dram, and nvram that is installed and how much of that memory is ava...
Page 135: 5.22.1
System resources screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-71 flash memory installed (read-only) indicates the amount of flash memory installed in the dle2x-ma and dle3x-ma and how much is currently available. Dram installed (read-only) indicates the amount of dram installed in t...
Page 136: 5.23
Chapter 5: local management 5-72 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5.23 high speed interface configuration menu screen (dle2x-ma only) access the high speed interface configuration menu screen from the module specific configuration menu screen by using the arrow keys to highlight ...
Page 137
High speed interface configuration menu screen (dle2x-ma only) dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-73 figure 5-28 high speed interface configuration screen for the dle2x-ma the following briefly explains each field of the high speed interface configuration screen. Port type (read-...
Page 138
Chapter 5: local management 5-74 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide current oper. Mode (read-only) this field displays the current operating mode of ports 25 and 26. Depending on the interface installed (100base-fx or 100base-tx) this field displays the following: • with a 100base-...
Page 139: 5.23.1
High speed interface configuration menu screen (dle2x-ma only) dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-75 that only devices that operate at 100 mbps can communicate with that port. Section 5.23.5 describes how to enable or disable advertised modes. 5.23.1 configuring an delfx-ui or de...
Page 140: 5.23.5
Chapter 5: local management 5-76 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide selected, the deltx-ui automatically sets the active technology. To manually set the active technology through local management, proceed as follows: 1. Use the arrow keys to highlight the desired oper. Mode field. ...
Page 141: 5.24
Flash download screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-77 5.24 flash download screen the flash download screen, shown in figure 5-29, allows the user to clear the information stored in the dle2x-ma and dle3x-ma flash memory and download a new image file from a tftp server. Befo...
Page 142
Chapter 5: local management 5-78 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide figure 5-29 flash download screen the following briefly explains each field of the flash download screen: download method (selectable) this field toggles between tftp, runtime and bootp. If set for bootp, the modul...
Page 143
Flash download screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-79 reboot after download (modifiable when runtime is chosen only) this field notifies the user that the dle2x-ma and dle3x-ma will reboot after the download is complete. If a runtime download is performed, this field toggle...
Page 144: 5.24.1
Chapter 5: local management 5-80 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5.24.1 image file download using tftp set the dle2x-ma and dle3x-ma to download to flash using tftp as follows: 1. Use the arrow keys to highlight the download method field. 2. Use the space bar to select tftp. 3. ...
Page 145: 5.24.2
Flash download screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-81 5.24.2 image file download using runtime set the dle2x-ma and dle3x-ma to download to flash using runtime as follows: 1. Use the arrow keys to highlight the download method field. 2. Use the space bar to select runtime. ...
Page 146: 5.24.3
Chapter 5: local management 5-82 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5.24.3 image file download using bootp set the dle2x-ma and dle3x-ma to download to flash using bootp as follows: 1. Use the arrow keys to highlight the download method field. 2. Use the space bar to select bootp. ...
Page 147
Port redirect function screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-83 access the port redirect function screen from the module specific configuration menu screen by using the arrow keys to highlight the port redirect function menu item and pressing enter. The port redirect function...
Page 148: 5.25.1
Chapter 5: local management 5-84 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide remap errors (read-only) displays whether the corresponding source ports are configured to send errored frames to the destination ports, or to drop all errored frames before forwarding traffic. Source port [ n ] (s...
Page 149
Port redirect function screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-85 2. Press the space bar or backspace one or more times to increment or decrement the port number displayed in the brackets [n] until the appropriate port number is displayed. 3. Use the arrow keys to highlight the...
Page 150: 5.26
Chapter 5: local management 5-86 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5.26 broadcast suppression screen the broadcast suppression screen, figure 5-31, allows the user to set a desired limit of receive broadcast frames per port per second. Access the broadcast suppression screen from ...
Page 151: 5.26.1
Broadcast suppression screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-87 the following explains each field of the broadcast statistics screen: port # (read-only) identifies the number of the port. Total rx (read-only) displays the total number of broadcast frames received. Peak rate (r...
Page 152: 5.26.2
Chapter 5: local management 5-88 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 4. Press enter. The message “saved ok” is displayed. 5.26.2 setting the reset peak switch to set the reset peak switch field to yes or no, proceed as follows: 1. Use the arrow keys to highlight the reset peak field...
Page 153: 5.28
Switch statistics screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-89 figure 5-32 module statistics menu screen the module statistics menu screen displays the following menu items: switch statistics the switch statistics screen lists the number of frames received, transmitted, filtered,...
Page 154
Chapter 5: local management 5-90 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide access the switch statistics screen from the module statistics menu screen by using the arrow keys to highlight the switch statistics menu item and pressing enter. The switch statistics screen displays. Figure 5-33...
Page 155: 5.28.1
The interface statistics screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-91 frames frwded (read-only) displays the number of frames forwarded by the interface. [1-12], [13-24],or [25-26] (dle2x-ma), [25] (dle3x-ma)(selectable) when the switch statistics is displayed, the statistics are...
Page 156
Chapter 5: local management 5-92 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide figure 5-34 interface statistics screen the following definitions explain each field of the interface statistics screen: interface (read-only) this field displays the interface number for which statistics are curre...
Page 157
The interface statistics screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-93 inunicast (read-only) the inunicast field displays the total number of frames that have been received that were sent to a single address. Innonunicast (read-only) this field displays the total number of frames ...
Page 158
Chapter 5: local management 5-94 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide outerrors (read-only) this field displays the total number of outbound frames discarded because they contained errors. This field represents the total number of errored frames, regardless of the cause of the error....
Page 159: 5.29.1
Rmon statistics screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-95 interface [xx] (command) this command is used to enter an interface number for viewing statistics. For instructions on how to use this command, refer to section 5.29.1. Clear counters (command) this command is used to r...
Page 160
Chapter 5: local management 5-96 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide figure 5-35 rmon statistics screen the rmon statistics screen provides statistics for all front panel ethernet interfaces, and any fast ethernet interface modules installed in the dle2x-ma. Rmon statistics are not ...
Page 161
Rmon statistics screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-97 the following definitions explain each field of the rmon statistics screen: rmon index (read-only) this field displays the current ethernet interface for which statistics are being shown. The dle2x-ma and dle3x-ma have ...
Page 162
Chapter 5: local management 5-98 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide multicasts (read-only) the multicasts field displays the total number of good frames received that were directed to a multicast address. The value of this field does not include frames directed to the broadcast add...
Page 163
Rmon statistics screen dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-99 total octets (read-only) this field displays the total number of octets (bytes) of data, including those in bad frames, received on this interface. 64 octets (read-only) displays the total number of frames including bad...
Page 164: 5.30.1
Chapter 5: local management 5-100 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5.30.1 displaying rmon statistics to display the statistics for any index, proceed as follows: 1. Use the arrow keys to highlight the index [xx] field at the bottom of the screen. 2. Press the space bar to increme...
Page 165: 5.31
Network tools dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-101 5.31 network tools the network tools function resides on both the dle2x-ma and dle3x-ma and allows the user to access and manage network devices. Access the network tools screen by using the arrow keys tohighlight the network t...
Page 166: 5.31.1
Chapter 5: local management 5-102 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide • special commands – allow the user to exit from network tools. The commands are done, exit, and quit. The commands are presented in the following format: command: syntax: shows the required command format. It ind...
Page 167
Network tools dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-103 static route. Super-user access is required to delete an entry or add a static route. Each arp cache entry lists the network interface that the device is connected to, the device’s network address or ip address, the device’s ph...
Page 168
Chapter 5: local management 5-104 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide example: -> arp -a # interface # (sonicint) # (sonicint) # (sonicint) # (sonicint) network address 122.144.40.111 122.144.48.109 122.144.52.68 122.144.21.43 physical address 00.00.0e.12.3c.04 00.00.0e.F3.3d.14 00....
Page 169
Network tools dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-105 bridge: syntax: bridge [enable/disable] [ifnum/all] description: the bridge command allows each bridge port to be enabled or disabled at the user’s request, either one at a time or all at once. Specifying a single interface num...
Page 170
Chapter 5: local management 5-106 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide defroute: syntax: defroute [interface number] [ip address] description: the defroute command allows the user to view, set or delete the default ip route to a managed device through the specified interface. Options...
Page 171
Network tools dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-107 netstat: syntax: netstat [option] description: the netstat command provides a display of general network statistics for the managed device. The netstat command must be used with one of the two display options. Options: -i displ...
Page 172
Chapter 5: local management 5-108 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide ping: syntax: ping [ip address] description: the ping command generates an outbound ping request to check the status (alive/not alive) of a device at a specified ip address. Options: not applicable example: -> pin...
Page 173
Network tools dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-109 reset: syntax: reset description: the reset command allows a soft reset of the device. The user will be queried to confirm the reset command to insure against unwanted resets. Options: not applicable example: ! The network tool...
Page 174
Chapter 5: local management 5-110 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide show: syntax: show [protocol] [table] description: the show command displays information concerning various components of the device. Protocols currently supported are ip, ipx, decnet, and appletalk. Components of...
Page 175
Network tools dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-111 traceroute: syntax: traceroute [ip address] description: the traceroute command generates a traceroute request to a specified ip address and provides a display of all next-hop routers in the path to the device. If the device is...
Page 176
Chapter 5: local management 5-112 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide soft_reset: syntax: soft_reset description: this command restarts the software image, which restores the user configuration settings from nvram. The user will be queried to confirm the reset command to ensure agai...
Page 177
Network tools dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-113 telnet: syntax: telnet [ip address] [port #] description: the telnet command allows the user to communicate with another host (that supports telnet connections) using the telnet protocol. The user must specify the remote host u...
Page 178
Chapter 5: local management 5-114 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide link_trap: syntax: link_trap [enable/disable/status] [port/all] description: the link_trap command allows link traps to be enabled or disabled when specifying a single port, or simultaneously when specifying “all”...
Page 179
Network tools dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5-115 atm_stp_state: syntax: atm_stp_state [state] description: the atm_stp_state command allows the user to enable, disable, or check the status of the spanning tree algorithm on all atm interfaces. The user must specify the state o...
Page 180: 5.31.2
Chapter 5: local management 5-116 dle22-ma,dle32-ma,dle23-ma and dle33-ma user’s guide 5.31.2 special commands done, quit, exit: syntax: done description: the done command enables the user to exit from network tools and return to the main menu screen. Options: not applicable example: -> done connect...
Page 181: Appendix A
Dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide a-1 appendix a specifications this appendix provides operating specifications for the dle32-ma, dle22-ma, dle33-ma and dle23-ma interface modules. Cabletron systems reserves the right to change these specifications at any time without notice. A....
Page 182: A.4
Appendix a: specifications a-2 dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide a.4 input/output ports dle22-ma dle32-ma dle23-ma dle33-ma ports 1 through 24 ethernet (10base-t compliant) with rj45 type connectors. Slots for optional fast ethernet interface modules (ports 25 and 26) slots acce...
Page 183: A.5
Com port pinout assignments dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide a-3 a.5 com port pinout assignments the com port is a serial communications port that supports local management or connection to a ups. The com port has the following pin assignments: a.6 regulatory compliance safety ...
Page 185: Appendix B
Dle28-ma, dle38-ma, dle29-ma and dle39-ma user’s guide b-1 appendix b deltx-ui, delfx-ui and delf3-ui specifications the dle2x-ma supports three fast ethernet interface modules: • deltx-ui • delfx-ui • delf3-ui this appendix provides the specifications for these modules. B.1 deltx-ui the deltx-ui us...
Page 186: B.2
Appendix b: deltx-ui, delfx-ui and delf3-ui specifications b-2 dle28-ma, dle38-ma, dle29-ma and dle39-ma user’s guide b.2 delfx-ui the delfx-ui shown in uses an sc style connector that supports multimode fiber optic cabling. Specifications for the delfx-ui are listed below. Figure b-2 delfx-ui table...
Page 187: B.3
Delf3-ui dle28-ma, dle38-ma, dle29-ma and dle39-ma user’s guide b-3 b.3 delf3-ui the delf3-ui shown in uses an sc style connector that supports single mode fiber optic cabling. Specifications for the delf3-ui are listed in table b-2 below. Figure b-3 delf3-ui table b-2 transmitter power cable type w...
Page 189: Appendix C
Dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide c-1 appendix c mode switch bank settings and optional installations this appendix covers the following items: • required tools (section c.1) • locations, functions, and settings for the mode switches (section c.2) • installing optional fast ethe...
Page 190
Appendix c: mode switch bank settings and optional installations c-2 dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide figure c-1 shows the location of the mode switches and the switch settings for normal operation. Figure c-1 dle2x-ma and dle3x-ma mode switch location/component layout switch d...
Page 191
Setting the mode switch dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide c-3 • switch 6 – after changing the position of switch 6 and restarting the module, the dle2x-ma and dle3x-ma request a new image download until they either receive a new image or the reset button on the front panel is pr...
Page 192: C.3
Appendix c: mode switch bank settings and optional installations c-4 dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide c.3 installing optional fast ethernet interface modules figure c-2 shows the location of the fast ethernet interface module connectors on the dle2x-ma board for port slots 25 a...
Page 193
Installing optional fast ethernet interface modules dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide c-5 to install a fast ethernet interface module in port slot 25 or 26 of the dle2x-ma, proceed as follows: 1. Remove the coverplate from the port slot where the fast ethernet interface module w...
Page 194
Appendix c: mode switch bank settings and optional installations c-6 dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide figure c-3 coverplate removal 2. Remove the screw from the rear standoff. Save the screw. 3. Refer to figure c-4. Gently pull the faceplate of the host module forward to allow ...
Page 195
Installing optional fast ethernet interface modules dle22-ma, dle32-ma, dle23-ma and dle33-ma user’s guide c-7 figure c-4 installing the fast ethernet interface module 5. Press down firmly on the fast ethernet interface module until the pins slide all the way into the motherboard connector. Ensure t...
Page 197: Numerics
Dle22-ma, dle32-ma, dle23-ma, dle33-ma user’s guide index-1 numerics 100base-tx cable length 2-2 10base-t connection 3-6, 3-8 requirements 2-2 802.1q vlan configuration 5-14, 5-69 a access policy 5-23, 5-52 b broadcast suppression screen 5-86, 5-87, 5-88 c cable specifications 100base-fx mmf 2-2 100...
Page 198
Index index-2 dle22-ma, dle32-ma, dle23-ma, dle33-ma user’s guide clear nvram 5-40 com port application 5-40 com port configuration 5-47 default gateway 5-38, 5-42 ip address 5-38, 5-40 ip fragmentation 5-40, 5-51 mac address 5-37 management mode 5-39, 5-46 module date 5-38 module time 5-38, 5-43, 5...
Page 199
Index dle22-ma, dle32-ma, dle23-ma, dle33-ma user’s guide index-3 atm_stp_state 5-115 bridge 5-105 defroute 5-105, 5-106 done 5-116 link_trap 5-114 ping 5-108 reset 5-109 show 5-110 soft_reset 5-111 telnet 5-113 traceroute 5-111, 5-113, 5-115 o operational mode 5-17 p password screen 5-7 peak switch...
Page 200
Index index-4 dle22-ma, dle32-ma, dle23-ma, dle33-ma user’s guide instance 5-66 port # 5-65 port name 5-66 smart trunk state 5-66 smarttrunk, introduction to 1-3 snmp community names screen 5-22, 5-51 access policy 5-23, 5-52 community name 5-23, 5-52 snmp traps screen 5-25, 5-54 enable traps 5-26 t...
Page 202
9032627 printed in u.S.A..