Cabletron Systems ESX-1320 Installation Manual - Automatic 20-Second Exit
Using the LCD
ESX-1320/ESX-1380 Installation Guide
4-13
To Display the Messages
There are two ways to access and display the saved System Messages:
•
From the product name display
Press and hold the DISPLAY button for 3 seconds while the product
name (e.g., CABLETRON ESX-1320) is displayed. When the button
is released, the display steps to the Alarm Messages. Then press and
hold the DISPLAY button for another 3 seconds. When the button is
released, the display steps to the first of the saved System Messages.
Thereafter, each time you press the DISPLAY button, the next saved
message is displayed.
•
From an Alarm Message display
Press and hold the DISPLAY button for 3 seconds while an Alarm
Message is displayed. When released, the display steps to one of the
saved System Messages. Thereafter, each time you press the
DISPLAY button, the next saved message is displayed.
To Exit
There are two ways to exit the System Messages:
•
Automatic 20-second exit
Allowing 20 seconds to elapse after the last DISPLAY button
operation. The display returns to the product name.
•
From any displayed System Message
Press and hold the DISPLAY button for 3 seconds. When released, the
display automatically returns to the product name.