Cabletron Systems LM User Manual - page 18
GETTING STARTED
Page 3-3
Figure 3-1. MRXI/LM Screens
3.4
ACCESSING LOCAL MANAGEMENT VIA TERMINAL
To use MRXI/LM, the console must be connected as described in
Chapter 2,
Attaching the Console
. To access MRXI/LM:
1.
If not already powered on, power on the MRXI.
2.
Turn on power to the terminal. After a brief (approximately 5
seconds) warmup, the Password Screen appears (see Figure 3-2).
3.
If you are not using the password feature of MRXI/LM or if you
have not yet applied your own password, press Return.
If you have applied a password known only to you, enter that
password now, then press Return.
PASSWORD SCREEN
MRXI SNMP LOCAL MANAGEMENT
MAIN
COMMUNITY NAMES
RETURN
SAVE
DEVICE/PORT INFORMATION SCREEN
ENABLE PORT
ENABLE ALL PORTS
DISABLE ALL PORTS
EXIT
SAVE
PORT n
DISABLE PORT
RESET COUNTERS
COMMUNITY NAMES