1. DL manuals
  2. Cabletron Systems
  3. Network Hardware
  4. MMAC-Plus 9A128-01
  5. Management Manual

Cabletron Systems MMAC-Plus 9A128-01 Management Manual

Other manuals for MMAC-Plus 9A128-01: User Manual
Manual is about: ATM Access Modules

Summary of MMAC-Plus 9A128-01

  • Page 1

    9032070 mmac-plus ® 9a128-01/9a129-01 atm module local management appendix.

  • Page 3: Appendix

    1 appendix 9a128-01 and 9a129-01 module specific information introduction this appendix contains local management information that is specific to the following atm modules: • 9a128-01 (1 port, multimode fiber, sc connector) • 9a129-01 (1 port, single-mode fiber, sc connector) module interfaces the 9...

  • Page 4

    9a128-01 and 9a129-01 module specific information 2 fnb resource configuration codes the 9a128-01 and 9a129-01 atm modules provide connectivity between two interfaces: the front panel interface and one of the fddi rings on the backplane (fnb-1 or fnb-2). The fnb resource configuration screen allows ...

  • Page 5

    3 9a128-01 and 9a129-01 module specific information virtual channels and virtual paths rather than addressing cells to a specific destination, as in a lan, atm addresses cells to virtual channels (vcs) and/or virtual paths (vps). This addressing takes place in the header field of the atm cell. Vcs a...

  • Page 6: Atm Connection Setup Screen

    9a128-01 and 9a129-01 module specific information 4 atm connection setup screen the atm connection setup screen (figure 1), displays the module’s permanent virtual channels (pvcs) and switched virtual channels (svcs). You can add or delete pvcs. Figure 1. Atm connection setup screen mmac-plus local ...

  • Page 7

    5 9a128-01 and 9a129-01 module specific information atm connection setup screen fields the following information briefly explains each atm connection setup screen field. Atm port displays the mib ii interface number. Valid values are 4 through 67. Current connections displays the number of connectio...

  • Page 8

    9a128-01 and 9a129-01 module specific information 6 oper. Status displays the operational status of each connection. Valid values are: • enabled ( default ) • disabled displaying information about another port to display information about another port (change the mib ii interface number): 1. Use the...

  • Page 9

    7 9a128-01 and 9a129-01 module specific information atm connection add/delete entry screen the atm connection add/delete entry screen (figure 2), is used to add or delete a pvc on the module. Figure 2. Atm connection add/delete entry screen mmac-plus local management atm connection add/delete entry ...

  • Page 10

    9a128-01 and 9a129-01 module specific information 8 atm connection add/delete entry screen fields the following information briefly explains each atm connection add/delete entry screen field. Port the mib ii interface that the pvc is being created on. Vpi use this field to enter the vpi of the pvc y...

  • Page 11

    9 9a128-01 and 9a129-01 module specific information adding pvcs to the atm connection table to add a pvc to the atm connection table: 1. Go to the atm connection add/delete entry screen. 2. Use the arrow keys to move the cursor to the vpi field. 3. Enter the number of the vpi you want to add and the...

  • Page 12

    9a128-01 and 9a129-01 module specific information 10 modifying an existing pvc to modify a pvc: 1. Go to the atm connection add/delete entry screen. 2. Use the arrow keys to move the cursor to the vpi field. 3. Enter the number of the vpi you want to modify and then press the tab key. 4. Enter the n...

  • Page 13: Lec Administration Screen

    11 9a128-01 and 9a129-01 module specific information lec administration screen the lec administration screen (figure 3), is used to add, delete, modify, or view lan emulation attributes on the module. Figure 3. Lec administration screen mmac-plus local management 9a128-01 lec administration module n...

  • Page 14

    9a128-01 and 9a129-01 module specific information 12 lec administration screen fields the following information briefly explains each lec administration screen field. Lec index displays the mib ii interface number. Valid values are 4 through 67. Configure elan (toggle) specifies whether the lan emul...

  • Page 15

    13 9a128-01 and 9a129-01 module specific information max mtu size (toggle) the maximum data frame size that this client will use the next time it returns to the initial state. Use the space bar to select one of the following choices: • 1516 (default) • 4544 lan type (toggle) the data frame format th...

  • Page 16

    9a128-01 and 9a129-01 module specific information 14 deleting an elan to delete an elan: 1. Use the arrow keys to highlight delete, then press the return key. The message “delete complete” is displayed. Modifying an elan to modify an elan: 1. Use the arrow keys to move to the field you want to modif...

  • Page 17: Lec Properties Screen

    15 9a128-01 and 9a129-01 module specific information lec properties screen the lec properties screen (figure 4), displays information about the various lan emulation components. Figure 4. Lec properties screen mmac-plus local management 9a128-01 lec properties module name: 9a128-01 firmware revision...

  • Page 18

    9a128-01 and 9a129-01 module specific information 16 lec properties screen fields the following information briefly explains each lec properties screen field. Lec index displays the mib ii interface number. Valid values are 4 through 67. Lec id displays the two-byte id assigned to this lec by the le...

  • Page 19

    17 9a128-01 and 9a129-01 module specific information les control distribute vcc an optional point-to-multi-point, or point-to-point connection. The les uses this to forward le_arp requests that it cannot process. This connection is maintained for as long as the lec participates in the elan. Bus mult...

  • Page 20: Svc Signalling Screen

    9a128-01 and 9a129-01 module specific information 18 svc signalling screen the svc signalling screen (figure 5), is used to change the type of svc signalling and lan emulation used by the module. Figure 5. Svc signalling screen mmac-plus local management 9a128-01 svc signalling module name: 9a128-01...

  • Page 21

    19 9a128-01 and 9a129-01 module specific information svc signalling screen fields the following information briefly explains each svc signalling screen field. Signalling/lan emulation type (toggle) displays the types of signalling and lan emulation to be used by the module. Use the space bar to sele...

  • Page 22

    9a128-01 and 9a129-01 module specific information 20