Cabletron Systems MMAC-Plus 9E423-24 Reference Manual

Other manuals for MMAC-Plus 9E423-24: User Manual
Manual is about: Ethernet SmartSwitch Module

Summary of MMAC-Plus 9E423-24

  • Page 1

    Mmac-plus ™ module local management 9e423-24 module specific appendix 9031671 draft.

  • Page 2: Appendix

    1 appendix 9e423-24 module specific information introduction this appendix contains local management information that is specific to the 9e423-24 ethernet switch module. The 9e423-24 ethernet switch module is a 25-port switching module with: • 24 front panel ethernet ports (2 rj-71 telco connectors)...

  • Page 3

    9e423-24 module specific information 2 module interface codes the 9e423-24 ethernet switch module has 29 interfaces. The table below lists the identifying number, name, and description of each interface. Table 1. 9e423-24 module interface codes interface number interface name interface description 1...

  • Page 4

    3 appendix use the numbers listed in table 1 to configure the module’s default interface (see the general configuration screen). 24 enet19 ethernet front panel port 19 25 enet20 ethernet front panel port 20 26 enet21 ethernet front panel port 21 27 enet22 ethernet front panel port 22 28 enet23 ether...

  • Page 5

    9e423-24 module specific information 4 full duplex configuration screen the 9e423-24 full duplex configuration screen displays the port number, operation mode, link status, and port status of the module’s 24 ports (12 ports at a time). Figure 1. 9e423-24 full duplex configuration screen mmac-plus lo...

  • Page 6

    5 appendix full duplex configuration screen fields operation mode (modifiable) - this field lets you determine whether the specified port will transmit and receive data separately or simultaneously. You can set this field to one of the following values: • standard enet - the port can either transmit...

  • Page 7

    9e423-24 module specific information 6 port status (read-only) - indicates whether the port has been turned on or off administratively. You will see one of the following values: • enabled - the port is turned on administratively. • disabled - the port is turned off administratively. Displaying infor...

  • Page 8

    7 appendix port statistics screen the 9e423-24 port statistics screen displays information and statistics about the module’s 24 ethernet ports. Figure 2. 9e423-24 port statistics screen mmac-plus local management port statistics module name: 9e423-24 firmware revision: 01.Xx.08 slot number: 12 bootp...

  • Page 9

    9e423-24 module specific information 8 port statistics screen fields port # (read-only) - indicates the current port for which statistics are displayed. Octets (read-only) - displays the number of octets transmitted and received. Packets (read-only) - displays the number of packets transmitted and r...

  • Page 10

    9 appendix port type (read-only) - displays one of the following values: • aui • bnc • epim-x • mmf sma • mmf st • rj45 • rj71 • smf st port status (read-only) - indicates the administrative status of the selected port. Possible values are enabled and disabled. Application (read-only) - displays bri...