Cabletron Systems SEH100TX-22 User Manual - page 48
Manual is about: Cabletron Systems USER'S GUIDE 100BASE-T STACKABLE SEH100TX-22
of
52
Appendix A: EPIM Information
A-4
SEH100TX User’s Guide
Table A-2 provides the specifications for the EPIM-100FMB.
Table A-2
Transmitter Power (EPIM-100FMB)
The transmitter power levels and receive sensitivity levels listed are peak
power levels after optical overshoot. A peak power meter must be used to
correctly compare the values given above to those measured on any
particular port. If power levels are being measured with an average power
meter, add 3 dBm to the measurement to compare the measured values to
the values listed above.
Cable Type
Worst Case Budget
Typical Budget
50/125
µ
m fiber optic
6.0 dB
9.0 dB
62.5/125
µ
m fiber optic
9.0 dB
12.0 dB
100/140
µ
m fiber optic
15.0 dB
18.0 dB