Cabletron Systems SmartSwitch 8H02-16 User Manual - Gateway Ip Address.

Flash Download Screen

8H02-16 User’s Guide

6-45

The following briefly explains each field of the Flash Download screen: 

Download Method (Selectable)

This field toggles between BOOTP and TFTP. If set for BootP, the 

device sends out a BootP request to determine the IP address of the TFTP 

server and the filename of the image to be downloaded. If set for TFTP, 

the 8H02-16 attempts a TFTP download based on the IP address and 

filename entered in the fields at the bottom of the Flash Download screen.

Reboot After Download (Read-only)

This field notifies the user that the 8H02-16 will reboot after the download 

is complete.

TFTP Gateway IP Addr (Selectable)

This field shows the IP address of the TFTP gateway server defined in the 

General Configuration screen in Section 6.6.5, Setting the TFTP 

Gateway IP Address.

Last Image Server IP (Read-only)

This field shows the IP address of the server used for the previous FLASH 

Download.

Last Image File Name (Read-only)

This field shows the complete path and file name of the last image 

downloaded to FLASH.

If TFTP is selected as the download method (Figure 6-14), the following 

two additional fields appear:

Download Server IP (Selectable)

The IP address of the TFTP server to be used for the FLASH download is 

entered in this field.

Download File Name (Selectable)

The complete path and file name of the new image is entered in this field.