CableTronix CT-9X1HD Installation Manual - page 2
2
This package contains:
One CT-9X1HD Audio/Video Distribution Amplifier
One 9V AC Power Adaptor
One CT-9X1HD Installation Manual
PRODUCT DESCRIPTION
The CT-9X1HD is a component audio/video 9-port HDTV distribution amplifier. The unit is
designed to allow any audio/video source with Y, Cb, CR or Y, Pb, Pr outputs (components) to
distribute audio and video from a single source to nine different locations without any signal loss.
The CT-9X1HD also supports composite video and digital audio. 480i, 720p, 1080i, and 1080p
resolutions are supported making it ideal for high definition signals.
SPECIFICATIONS
CT-9X1HD
1-In 9-Out Distribution Amplifier Specifications (Typical)
Video
1. Video Impedance
75 ohm
2. Video Bandwidth
>100MHz (HDTV requires 37MHz minimum)
3. Video Gain
2V unterminated, 1V into 75 ohms
4. Return Loss
18dB
5. Port to Port Isolation
32dB
6. Out to In Isolation
60dB
7. Nominal Input Level
1 Volt peak-to-peak
Audio (Analog)
8. Audio Input Impedance
22K ohm
9. Audio Output Impedance
1K ohm
10. Gain
Unity
11. THD
0.05%
12. Frequency Response
20Hz to 100kHz
13. Channel Separation
>75dB
14. Port to Port Isolation
60dB
15. Out to In Isolation
60dB
16. Signal to Noise
100dB@2V (out)
17. Nominal Input Level
1 Volt peak-to-peak
18. Digital Audio
Supports standard SPDIF digital audio. Unity gain when terminated
into 75 ohms (2X gain high impedance). Greater than 50MHz of
bandwidth to ensure minimal degradation.
General
19. Power
9V AC @1000mA with a 2.1mm center coaxial connector.
20. Dimensions