CableTronix CT-DLM870D User Manual - page 5
Configure plan
In this setup menu, you can set the default settings of all
channels.
1 Bandwidth2 Audio IF
3 Digi mode
4 Mode
5 Symbol rate
6 Save settings
After setting all items, using arrow keys select “Save settings”
and press
, and select “YES” in the pop-up then press
to confirm.
Edit Plan
The user can edit the channel plan items INCLUDING:
Channel number, availability, channel type, video carrier
frequency, bandwidth and sound carrier frequency; when the
channel type is set to digital, it can also be the digital channel
center frequency, bandwidth, modulation mode, and the
symbol rate.
Channel Type: digital signal / analog signal
Channel bandwidth: 1MHz - 9.9MHz
Modulation: 16/32/64/128/256QAM
Symbol rate: 1M - 7M
Create Plan
The following steps can create a user channel table:
1. Connecting cable.
2. In the “SETUP” menu, select “CREAT PLAN…” and press
to enter.
3. The unit will show below content:
Using the
to select the channel plan of your TV system
and then press the
or
key to start. The progress
bar shows the degree of created.