CAD Audio MB-18 Specifications

Page of 2

Download

Bookmark us

MB-18

18" Dual-Flex Gooseneck Intended for 1600VP Microphone System

Dimensional Drawing

Shown with 1600VP

Microphone System

Description

The MB-18 is an 18" dual-fl ex gooseneck intended to support

the Astatic 1600VP microphone system. The MB-18 is designed

to fi t on a quick-mount type XLRF-type connector mounted in

a table or shock mount. The dual-fl ex gooseneck features

a diameter of 8mm on the bottom and 6mm on the top for

exact positioning and low visibility.

The MB-18 is terminated with a TA3F-type connector which

mates with the microphone head of the Astatic 1600VP

microphone system. The opposite end of the gooseneck is

fi tted with a XLRM-type connector to be used for mounting the

gooseneck to a base, shock mount or chassis type connector.

RF Resistant Architecture provides greatly reduced susceptibility

to radio interference from GSM based cell phones/smart phones,

two-way walkie-talkies and similar communication devices.

Features

• Silent, durable 18" (45.7cm) dual-fl ex gooseneck

• RF (radio frequency) Resistant Architecture

• Quick-mount format

Page 1
Mb-18 18" dual-flex gooseneck intended for 1600vp microphone system dimensional drawing shown with 1600vp microphone system description the mb-18 is an 18" dual-fl ex gooseneck intended to support the astatic 1600vp microphone system. The mb-18 is designed to fi t on a quick-mount type xlrf-type con...
Page 2: Mb-18
Mb-18 18" dual-flex gooseneck intended for 1600vp microphone system two-year limited warranty cad audio hereby warrants that this product will be free of defects in material and workmanship for a period of two years from the date of purchase. In the unlikely event that a defect occurs cad audio will...