Caddytek CaddyLite 13.5 User Manual - page 12
of
14
Adjusting & tightening the handle
If the handle becomes
loose during normal use,
please use the supplied
tool to tighten the handle
as in Fig.h.
Front Wheel Alignment
1
3
If the cart veers to the right:
Step 1: Face the front wheel of the cart and use the provided
Allen wrench to loose the two side screws as in Fig.e.
Step 2: Then use the Allen wrench to adjust the front bolt
clockwise until the front wheel is centered as in Fig.f. Then
tighten the two side screws as in Fig.g.
.
If the cart veers to the left:
Step1: The same as above.
Step 2: Adjust the front bolt counterclockwise until the front
wheel is centered as in Fig.f. Then tighten the two side
screws as in Fig.g.
Fig.g
Fig.e
Fig.f
7
Fig.h