Summary of XAM series
Page 2
Xam600.1 amplifier feature descriptions thank you for purchasing this cadence xam series amplifier. Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We have tens of thousands of satisfied customers still using our first generation ultra drive amplifiers w...
Page 3
Xam600.1 1.Line input rca jacks: these inputs are for signal cables from the source. 2.High level input: if your head unit does not have rca outputs, use the speaker outputs for the audio source. 3.Remote bass control: remote controls the subwoofer level. 4.Smart turn on: turn on by headunit remote ...
Page 4
Xam400.2 1.Line input rca jacks: these inputs are for signal cables from the source. 2.High level input: if your head unit does not have rca outputs, use the speaker outputs for the audio source. 3.Smart turn on: turn on by headunit remote or high level input auto start. 4.Power & protection indicat...
Page 5
Xam500.4 1.Line input rca jacks: these inputs are for signal cables from the source. 2.High level input: if your head unit does not have rca outputs, use the speaker outputs for the audio source. 3.Smart turn on: turn on by headunit remote or high level input auto start. 4.Power & protection indicat...
Page 6
Xam500.4bt 1.Line input rca jacks: these inputs are for signal cables from the source. 2.High level input: if your head unit does not have rca 3.Output rca jacks: to audio inputs of satellite amplifier(if present). Outputs, use the speaker outputs for the audio source. 4.Smart turn on: turn on by he...
Page 7
Xam600.1 mono block amplifier applications 6 level control level control min max dual subwoofers min max 2-ohm minimum 4-ohm each minimum.
Page 8
Xam400.2 2 channel amplifier applications 7 min max low pass hi pass filter min max low pass hi pass filter 2-ohm minimum 4-ohm minimum mono subwoofer full range speakers r l.
Page 9
Xam500.4 4 channel amplifier applications l r l r 2-ohm each minimum full range speakers 4-ohm each minimum mono subwoofers 8 min max min max ch ch hi pass filter min max min max ch ch hi pass filter.
Page 10
Xam500.4bt 4 channel amplifier with bluetooth applications full range seaker 2-ohm each minimum 9 min max min max ch ch hi pass filter min max min max ch ch hi pass filter bluetooth bluetooth mono subwoofers 4-ohm each minimum r r r r.
Page 11
Xam series amiplifier features model output power rating rms @ 4 ohm 300w x 1 600w x 1 200w x 2 125w x 2 400w x 1 n/a n/a 50-150hz n/a n/a n/a n/a n/a 50-150hz low pass / full / high pass 0 to +12db@45hz 0 to +12db@45hz yes yes yes yes yes yes yes yes yes yes yes yes 0 to +12db@45hz low pass 50-150h...
Page 12
Xam600.1/ xam400.2/xam500.4 /xam500.4bt amplifier applications general: level (gain) control setup: at this point you are ready to get more specific on the settings for your amplifier. If you are not sure what the radio output sensitivity is, follow these general guide lines: turn the level control ...
Page 13
Troubleshooting amplifier will not power up. Check for good ground connection. Check that remote dc terminal has at least 13.8v dc. Check that there is battery power on the + terminal. Check for shorts on speaker leads. Check that the volume control on the head unit is turned down low. Remove speake...
Page 14
// features and specifications subject to change and or improvement without notice. Though we tried our best to ensure that this manual is free and clear of errors please don’t hold us responsible for printing errors. // copyright by cadence acoustics ltd. Www.Cadencesound.Com.