Cadet BTF1 Installation Instructions Manual

cadetheat.com    Tel: 360-693-2505    PO Box 1675   Vancouver, WA    98668-1675

Benefits You Can Depend On

SAVE THESE INSTRUCTIONS

BTF Built-In Thermostat Kit

Installation Instructions

IMPORTANT

Temperature Set Position

Co

ole

r        Warm

er

•  Easy to use with large twist dial

•  Eliminates the need for extra wiring

•  Conveniently mounts to either end of 

Cadet Electric Baseboard

•  Use with 120-, 208-, or 240-volt Electric 

Baseboard models

•  Choose from white or almond color to 

match your Electric Baseboard heater

•  Available in single (2 wires) or double (4 

wires) pole

•  Setpoint temperature range: 45º - 80ºF

•  25 Amp

•  Your BTF built-in thermostat is guaranteed 

with a 

1 year limited warranty

1.  Read all instructions before installing or using 

this thermostat.

2.  High temperatures  may be generated under 

certain abnormal conditions. Do not partially or 

fully cover or obstruct the front of this heater.     

3.   Do  not operate any heater after it malfunctions. 

Disconnect power at service panel and have 

heater inspected by a qualified electrician before 

reusing.

4.  To disconnect heater, turn  controls to off, and 

turn off power to heater circuit at main disconnect 

panel.

5. Do not insert or allow foreign objects to enter 

any ventilation or exhaust opening as this may 

cause  an  electric  shock  or  fire,  or  damage  the 

heater.

6.  To  prevent  a  possible  fire,  do  not  block  air 

intakes or exhaust in any manner.

7.  A heater has hot and arcing or sparking parts 

inside. Do not use it in areas where gasoline, 

paint, or flammable vapors or liquids are used or 

stored. 

8. Do not use outdoors.

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, 

electric shock, and injury to persons, including the following:

http://www.cadetheat.com/products/thermostats/BTF

CONTROLS

Turn knob counter-clockwise for cooler 

room temperature. Turn knob clockwise 

for warmer room temperature.

TOOLS REQUIRED

• Phillips Screwdriver        

• Wire Connectors       

• Straight Screwdriver

BTF1

BTF1TP

BTF2

BTF2TP

Page 1