Cadet SoftHEAT Owner's Manual - page 2
SAVE THESE INSTRUCTIONS
IMPORTANT INSTRUCTIONS
2
1. Read all instructions before in-
stalling or using this thermostat.
2. Use this thermostat only as
described in this manual. Any
other use not recommended by
the manufacturer may cause
fire, electric shock, or injury to
persons.
3. Do not insert or allow foreign
objects to enter any ventilation
or exhaust opening as this may
cause an electric shock or fire, or
damage the heater or thermostat.
4.
To disconnect thermostat turn off
power to heater circuit at main
disconnect panel.
5. Do not operate any thermostat
after it malfunctions. Disconnect
power at main disconnect panel
and have thermostat inspected
by a qualified electrician before
reusing.
6.
A thermostat has arcing or spark
-
ing parts inside. Do not use in
areas where gasoline, paint, or
flammable liquids are stored.
When using electrical appliances, basic precautions should always be
followed to reduce the risk of fire, electric shock, and injury to persons,
including the following:
WORKING WITH ELECTRICITY
TOOLS REQUIRED
Phillips Screwdriver
Wire Strippers
Wire
Connectors
Volt Meter
®
®
®
If you are uncomfortable working with electricity, running electrical supply
wire or installing a circuit breaker, please consult a licensed electrician.
Unanswered questions? Call our technical support team in Vancouver,
Washington toll free
855.223.3887 or outside the USA 360.693.2505.
®
•
Verify power has been turned off before starting any work!
• Follow the instructions in your SoftHEAT Baseboard Owner’s Guide (included with your
heater) until prompted to make thermostat connections.
TIPS BEFORE YOU BEGIN
PARTS OF YOUR THERMOSTAT
COMFORT
Lorem ipsum
ZONE
control knob
wired on right
wired on left
CO
MFO
RT
Lorem ipsum
ZO
NE
rounded corners to
front of heater
®