1. DL manuals
  2. Cadillac
  3. Automobile
  4. 2004 SRX
  5. Owner's Manual

Cadillac 2004 SRX Owner's Manual

Summary of 2004 SRX

  • Page 1

    Seats and restraint systems ........................... 1-1 front seats ............................................... 1-2 rear seats ............................................... 1-7 safety belts .............................................. 1-8 child restraints ...................................

  • Page 2: Canadian Owners

    General motors, gm, the gm emblem, cadillac, the cadillac crest & wreath are registered trademarks and the name srx is a trademark of general motors corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without furth...

  • Page 3: Caution:

    Safety warnings and symbols you will find a number of safety cautions in this book. We use a box and the word caution to tell you about things that could hurt you if you were to ignore the warning. { caution: these mean there is something that could hurt you or other people. In the caution area, we ...

  • Page 4: Vehicle Damage Warnings

    Vehicle damage warnings also, in this book you will find these notices: notice: these mean there is something that could damage your vehicle. A notice will tell you about something that can damage your vehicle. Many times, this damage would not be covered by your warranty, and it could be costly. Bu...

  • Page 5

    These are some examples of vehicle symbols you may find on your vehicle: v.

  • Page 6: Notes

    ✍ notes vi.

  • Page 7: Section 1

    Front seats ......................................................1-2 manual passenger seat ..................................1-2 power seats ..................................................1-2 power lumbar ...............................................1-3 heated seats ..............................

  • Page 8: Front Seats

    Front seats manual passenger seat your vehicle may have a manual passenger seat. To adjust the seat, lift the bar under the front of the seat to unlock it. Slide the seat to where you want it and release the bar. Try to move the seat back and forth with your body to be sure the seat is locked in pla...

  • Page 9: Power Lumbar

    Power lumbar your vehicle may have this feature. The driver’s and passenger’s seatback lumbar support can be adjusted by moving a control located on the outboard side of the seat cushions. To increase or decrease support, hold the control forward or rearward. Keep in mind that as your seating positi...

  • Page 10: Reclining Seatbacks

    Reclining seatbacks if your vehicle has manual reclining front seatbacks, the levers are located on the outboard sides of the front seats. Lift the lever to release the seatback, then move the seatback to where you want it. Release the lever to lock the seatback in place. To return the seatback to t...

  • Page 11: Caution:

    But don’t have a seatback reclined if your vehicle is moving. { caution: sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can’t do their job when you’re reclined like this. The shoulder belt can’t do its job. In a crash, you cou...

  • Page 12: Head Restraints

    Head restraints adjust your head restraint so that the top of the restraint is closest to the top of your head. This position reduces the chance of a neck injury in a crash. The front seat head restraints move up and down. Press the button located at the bottom of the head restraint and raise or low...

  • Page 13: Rear Seats

    Rear seats rear seat operation adjusting the second row seat the second row seat can be adjusted forward or rearward. Pull up on the lever under the seat cushion and slide the seat with your body. Release the lever and try to move the seat forward and rearward to be sure it is locked into place. Ent...

  • Page 14: Safety Belts

    Two buttons are located inside the liftgate. One button is to tilt the seatback forward for added storage space or when storing a flat tire. The other button is the power folding seat button. The button behind the second row seat is also a power folding seat button. Use either of these to fold the t...

  • Page 15: Caution:

    { caution: it is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and safety belts. Be s...

  • Page 16

    Why safety belts work when you ride in or on anything, you go as fast as it goes. Take the simplest vehicle. Suppose it’s just a seat on wheels. Put someone on it. 1-10

  • Page 17

    Get it up to speed. Then stop the vehicle. The rider doesn’t stop. The person keeps going until stopped by something. In a real vehicle, it could be the windshield... 1-11.

  • Page 18

    Or the instrument panel... Or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That’s why safety belts make such good sense. 1-12.

  • Page 19: Safety Belts

    Questions and answers about safety belts q: won’t i be trapped in the vehicle after an accident if i’m wearing a safety belt? A: you could be – whether you’re wearing a safety belt or not. But you can unbuckle a safety belt, even if you’re upside down. And your chance of being conscious during and a...

  • Page 20: Driver Position

    How to wear safety belts properly this part is only for people of adult size. Be aware that there are special things to know about safety belts and children. And there are different rules for smaller children and babies. If a child will be riding in your vehicle, see older children on page 1-28 or i...

  • Page 21

    5. To make the lap part tight, pull up on the shoulder belt. The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you’d be less likely to slide under the lap belt. If you slid under it, the belt wou...

  • Page 22: Caution:

    Q: what’s wrong with this? A: the shoulder belt is too loose. It won’t give nearly as much protection this way. { caution: you can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your...

  • Page 23: Caution:

    Q: what’s wrong with this? A: the belt is buckled in the wrong place. { caution: you can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones. This could cause serious in...

  • Page 24: Caution:

    Q: what’s wrong with this? A: the shoulder belt is worn under the arm. It should be worn over the shoulder at all times. { caution: you can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and...

  • Page 25: Caution:

    Q: what’s wrong with this? A: the belt is twisted across the body. { caution: you can be seriously injured by a twisted belt. In a crash, you wouldn’t have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to fix it...

  • Page 26

    To unlatch the belt, just push the button on the buckle. The belt should go back out of the way. Before you close the door, be sure the belt is out of the way. If you slam the door on it, you can damage both the belt and your vehicle. Safety belt use during pregnancy safety belts work for everyone, ...

  • Page 27

    The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it’s more likely that the fetus won’t be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly. Right front passenger position to learn how...

  • Page 28: Rear Seat Passengers

    Rear seat passengers it is very important for rear seat passengers to buckle up! Accident statistics show that unbelted people in the rear seat are hurt more often in crashes than those who are wearing safety belts. Rear passengers who are not safety belted can be thrown out of the vehicle in a cras...

  • Page 29

    Lap-shoulder belt all rear seating positions have lap-shoulder belts. Here is how to wear one properly. 1. Pick up the latch plate and pull the belt across you. Do not let it get twisted. 2. Push the latch plate into the buckle until it clicks. Pull up on the latch plate to make sure it is secure. W...

  • Page 30: Caution:

    The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash this applies force to the strong pelvic bones. And you would be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen. This could cause serious o...

  • Page 31: Children And Small Adults

    Rear safety belt comfort guides for children and small adults your vehicle may have this feature. If not, you can get it from your dealer. Rear shoulder belt comfort guides provide added safety belt comfort for older children who have outgrown booster seats and for small adults. When attached to a s...

  • Page 32

    3. Be sure that the belt is not twisted and it lies flat. The elastic cord must be under the belt and the guide on top. 4. Buckle, position and release the safety belt as described in rear seat passengers on page 1-22 . Make sure that the shoulder belt crosses the shoulder. To remove and store the c...

  • Page 33: Safety Belt Pretensioners

    Safety belt pretensioners your vehicle has safety belt pretensioners. You’ll find them on the buckle end of the safety belts for the driver and right front passenger. They help the safety belts reduce a person’s forward movement in a moderate to severe crash in which the front of the vehicle hits so...

  • Page 34: Child Restraints

    Child restraints older children older children who have outgrown booster seats should wear the vehicle’s safety belts. Q: what is the proper way to wear safety belts? A: if possible, an older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shou...

  • Page 35: Caution:

    { caution: never do this. Here two children are wearing the same belt. The belt can’t properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured. A belt must be used by only one person at a time. 1-29.

  • Page 36

    Q: what if a child is wearing a lap-shoulder belt, but the child is so small that the shoulder belt is very close to the child’s face or neck? A: if the child is sitting in a seat next to a window, move the child toward the center of the vehicle. If the child is sitting in the center rear seat passe...

  • Page 37: Caution:

    { caution: never do this. Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. If the child wears the belt in this way, in a crash the child might slide under the belt. The belt’s force would then be applied right on the child’s abdomen. That cou...

  • Page 38: Caution:

    { caution: people should never hold a baby in their arms while riding in a vehicle. A baby doesn’t weigh much -- until a crash. During a crash a baby will become so heavy it is not possible to hold it. For example, in a crash at only 25 mph (40 km/h), a 12-lb. (5.5 kg) baby will suddenly become a 24...

  • Page 39: Caution:

    { caution: children who are up against, or very close to, any air bag when it inflates can be seriously injured or killed. Air bags plus lap-shoulder belts offer outstanding protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor...

  • Page 40: Caution:

    Q: what are the different types of add-on child restraints? A: add-on child restraints, which are purchased by the vehicle’s owner, are available in four basic types. Selection of a particular restraint should take into consideration not only the child’s weight, height, and age but also whether or n...

  • Page 41: Caution:

    { caution: the body structure of a young child is quite unlike that of an adult or older child, for whom the safety belts are designed. A young child’s hip bones are still so small that the vehicle’s regular safety belt may not remain low on the hip bones, as it should. Instead, it may settle up aro...

  • Page 42

    A rear-facing infant seat (b) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint. A forward-facing child seat (c-e) provides restraint for the child’s body with ...

  • Page 43

    A booster seat (f-g) is a child restraint designed to improve the fit of the vehicle’s safety belt system. Some booster seats have a shoulder belt positioner, and some high-back booster seats have a five-point harness. A booster seat can also help a child to see out the window. Q: how do child restr...

  • Page 44: Caution:

    When choosing a child restraint, be sure the child restraint is designed to be used in a vehicle. If it is, it will have a label saying that it meets federal motor vehicle safety standards. Then follow the instructions for the restraint. You may find these instructions on the restraint itself or in ...

  • Page 45: Top Strap

    Caution: (continued) if you secure a forward-facing child restraint in the right front seat, always move the front passenger seat as far back as it will go. It is better to secure the child restraint in a rear seat outside position. Wherever you install it, be sure to secure the child restraint prop...

  • Page 46: Caution:

    In canada, the law requires that forward-facing child restraints have a top strap, and that the strap be anchored. In the united states, some child restraints also have a top strap. If your child restraint has a top strap, it should be anchored. { caution: each top tether bracket is designed to anch...

  • Page 47: Top Strap Anchor Location

    Anchor the top strap to one of the following anchor points. Be sure to use an anchor point located on the same side of the vehicle as the seating position where the child restraint will be placed. Raise the head restraint and route the top strap under it. See head restraints on page 1-6 . Once you h...

  • Page 48

    Lower anchorages and top tethers for children (latch system) your vehicle has the latch system. You’ll find anchors (a) for the second row outboard passenger positions. This system, designed to make installation of child restraints easier, does not use the vehicle’s safety belts. Instead, it uses ve...

  • Page 49: Caution:

    In order to use the latch system in your vehicle, you need a child restraint designed for that system. To assist you in locating the lower anchors for this child restraint system, each seating position with the latch system has a label on the seatback at each lower anchor position. The labels are lo...

  • Page 50: For The Latch System

    Securing a child restraint designed for the latch system 1. Find the anchors for the seating position you want to use, where the bottom of the seatback meets the back of the seat cushion. 2. Put the child restraint on the seat. 3. Attach the anchor points on the child restraint to the anchors in the...

  • Page 51: Caution:

    If your child restraint does not have the latch system, you will be using the lap-shoulder belt to secure the child restraint in this position. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say. { caution: ...

  • Page 52

    3. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 4. Pull the rest of the shoulder belt all the way out of the retractor to set the lock. 1-46.

  • Page 53: Right Front Seat Position

    5. To tighten the belt, feed the shoulder belt back into the retractor while you push down on the child restraint. If you are using a forward-facing child restraint, you may find it helpful to use your knee to push down on the child restraint as you tighten the belt. 6. Push and pull the child restr...

  • Page 54: Caution:

    Your vehicle has a right front passenger air bag. Never put a rear facing child restraint in this seat. Here is why: { caution: a child in a rear-facing child restraint can be seriously injured or killed if the right front passenger’s air bag inflates. This is because the back of the rear-facing chi...

  • Page 55

    5. Pull the rest of the shoulder belt all the way out of the retractor to set the lock. 6. To tighten the belt, feed the shoulder belt back into the retractor while you push down on the child restraint. You may find it helpful to use your knee to push down on the child restraint as you tighten the b...

  • Page 56: Air Bag Systems

    Air bag systems this part explains the frontal and side impact air bag systems. Your vehicle has six air bags: • a frontal air bag for the driver and another frontal air bag for the right front passenger, • a seat mounted side impact air bag for the driver and another for the right front passenger, ...

  • Page 57: Caution:

    Caution: (continued) the seat-mounted side impact air bags and roof-mounted side impact air bags are designed to inflate only in moderate to severe crashes where something hits the side of your vehicle. They aren’t designed to inflate in frontal, in rollover or in rear crashes. Everyone in your vehi...

  • Page 58: Where Are The Air Bags?

    There is a air bag readiness light on the instrument panel, which shows the air bag symbol. The system checks the air bag electrical system for malfunctions. The light tells you if there is an electrical problem. See air bag readiness light on page 3-40 for more information. Where are the air bags? ...

  • Page 59

    The front passenger’s frontal air bag is in the instrument panel on the passenger’s side. The driver’s side impact air bag is in the side of the driver’s seatback closest to the door. 1-53.

  • Page 60

    The right front passenger’s side impact air bag is in the side of the passenger’s seatback closest to the door. The roof-mounted side impact air bag for the driver and the passenger directly behind the driver is in the ceiling above the side windows. 1-54.

  • Page 61: Caution:

    The roof-mounted side impact air bag for the front passenger and the passenger directly behind the front passenger is in the ceiling above the side windows. { caution: if something is between an occupant and an air bag, the bag might not inflate properly or it might force the object into that person...

  • Page 62

    When should an air bag inflate? The driver’s and right front passenger’s frontal air bags are designed to inflate in moderate to severe frontal or near-frontal crashes. But they are designed to inflate only if the impact speed is above the system’s designed “threshold level.” in addition, your vehic...

  • Page 63

    What makes an air bag inflate? In an impact of sufficient severity, the air bag sensing system detects that the vehicle is in a crash. For both frontal and side impact air bags, the sensing system triggers a release of gas from the inflator, which inflates the air bag. The inflator, air bag and rela...

  • Page 64: Inflates?

    What will you see after an air bag inflates? After the air bag inflates, it quickly deflates, so quickly that some people may not even realize the air bag inflated. Some components of the air bag module – the steering wheel hub for the driver’s air bag, the instrument panel for the right front passe...

  • Page 65

    In many crashes severe enough to inflate the air bag, windshields are broken by vehicle deformation. Additional windshield breakage may also occur from the right front passenger air bag. • air bags are designed to inflate only once. After an air bag inflates, you’ll need some new parts for your air ...

  • Page 66: Vehicle

    Servicing your air bag-equipped vehicle air bags affect how your vehicle should be serviced. There are parts of the air bag systems in several places around your vehicle. Your dealer and the service manual have information about servicing your vehicle and the air bag systems. To purchase a service m...

  • Page 67: After A Crash

    Torn or frayed safety belts may not protect you in a crash. They can rip apart under impact forces. If a belt is torn or frayed, get a new one right away. Also look for any opened or broken air bag covers, and have them repaired or replaced. (the air bag system does not need regular maintenance.) re...

  • Page 68: Notes

    ✍ notes 1-62.

  • Page 69: Section 2

    Keys ...............................................................2-3 remote keyless entry system .........................2-4 remote keyless entry system operation ...........2-5 doors and locks .............................................2-8 door locks .............................................

  • Page 70: Section 2

    Storage areas ................................................2-45 glove box ...................................................2-45 cupholder(s) ................................................2-45 cell phone storage area ...............................2-45 center console storage area ................

  • Page 71: Keys

    Keys { caution: leaving children in a vehicle with the ignition key is dangerous for many reasons. A child or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. Do not leave the keys in a vehicle with children. 2-3.

  • Page 72

    One key works all of the lock cylinders on the vehicle. Your vehicle has an immobilizer vehicle theft deterrent system. The key has a transponder in the key head that matches a decoder in the vehicle’s steering column. If a replacement key or any additional key is needed, you must purchase it from y...

  • Page 73: Operation

    At times you may notice a decrease in range. This is normal for any remote keyless entry system. If the transmitter does not work or if you have to stand closer to your vehicle for the transmitter to work, try this: • check the distance. You may be too far from your vehicle. You may need to stand cl...

  • Page 74

    If your vehicle is programmed for remote confirmation, the doors must be closed for this feature to work. If a door is open, remote confirmation will be canceled. W (unlock): press this symbol on the remote keyless entry transmitter to unlock the driver’s door. This also disarms the theft-deterrent ...

  • Page 75

    Battery replacement under normal use, the battery in your remote keyless entry transmitter should last about four years. You can tell the battery is weak if the transmitter won’t work at the normal range in any location. If you have to get close to your vehicle before the transmitter works, it’s pro...

  • Page 76: Doors And Locks

    Doors and locks door locks { caution: unlocked doors can be dangerous. • passengers — especially children — can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle will not open it. You increase the chance of being thrown out of the vehicle in a crash if the doo...

  • Page 77: Power Door Locks

    Central door unlocking system your vehicle has a central door unlocking feature. When unlocking the driver’s door, you can unlock the other doors by holding the key in the turned position for a few seconds or by quickly turning the key twice in the lock cylinder. Power door locks the power door lock...

  • Page 78: Locks

    Programmable automatic door locks your vehicle is programmed so that when the doors are closed, the ignition is on and the shift lever is moved out of park (p), all the doors will lock. The doors will unlock every time you stop the vehicle and move the shift lever back into park (p). If someone need...

  • Page 79: Lockout Protection

    When you want to open a rear door when the security lock is on, do the following: 1. Unlock the door using the remote keyless entry transmitter, the front door power lock switch or by lifting the rear door manual lock. 2. Then open the door from the outside. To cancel the rear door security lock, do...

  • Page 80: Liftgate

    Liftgate to unlock the liftgate from the outside, turn the key in the driver’s door cylinder counterclockwise or use the remote keyless entry transmitter. To lock the liftgate using the key, turn the key clockwise in the driver’s door. Open the liftgate using the handle located below the license pla...

  • Page 81: Windows

    Windows { caution: leaving children in a vehicle with the windows closed is dangerous. A child can be overcome by the extreme heat and can suffer permanent injuries or even death from heat stroke. Never leave a child alone in a vehicle, especially with the windows closed in warm or hot weather. 2-13.

  • Page 82: Power Windows

    Power windows the power window switches are located on the armrest near each window. Press the up or down arrows on the switches to raise or lower the windows. Your vehicle has retained accessory power (rap) that allows you to use the power windows once the ignition has been turned off for up to 10 ...

  • Page 83: Caution:

    Programming the power windows if the battery on your vehicle has been recharged, disconnected or is not working, you will need to reprogram each front power window for the express-up feature to work. Before reprogramming, you will need to replace or recharge your vehicle’s battery. To program each f...

  • Page 84: Sun Visors

    Window lockout this feature allows you to disable the passenger window switches. The passenger window lockout button is located below the power window switches on the driver’s door armrest. Press the button to disable the passenger window controls. The light on the button will illuminate, indicating...

  • Page 85: Theft-Deterrent Systems

    Theft-deterrent systems vehicle theft is big business, especially in some cities. Although your vehicle has a number of theft-deterrent features, we know that nothing we put on it can make it impossible to steal. Theft-deterrent system the security light is located on the instrument panel cluster. I...

  • Page 86: Immobilizer

    Testing the alarm 1. From inside the vehicle, roll down the window, then get out of the vehicle, keeping the door open. 2. From outside of the vehicle, with the door open, lock the vehicle using the power door lock switch or the remote keyless entry transmitter and close the door. Wait approximately...

  • Page 87: Immobilizer Operation

    Immobilizer operation your vehicle is equipped with a passive theft-deterrent system. The system works when you turn the key to on. The key uses a transponder that matches an immobilizer control unit in your vehicle. The correct key will start the vehicle. Your vehicle has a special key that works w...

  • Page 88: Vehicle

    To program a new key do the following: 1. Verify that the new key has pk3+ stamped on it. 2. Insert the current driver’s key in the ignition and start the engine. If the engine will not start see your dealer for service. 3. After the engine has started, turn the key to off, and remove the key. 4. In...

  • Page 89: Ignition Positions

    Ignition positions with the key in the ignition switch, you can turn the key to four different positions. Notice: if your key seems stuck in off and you can’t turn it, be sure you are using the correct key; if so, is it all the way in? If it is, then turn the steering wheel left and right while you ...

  • Page 90

    Steering column ignition lock release if your vehicle has a dead battery or a battery with low voltage, you can still release the ignition lock and remove the key. Use the following procedure to release the steering column: 1. Locate the plastic screw head on the underside of the plastic cover for t...

  • Page 91: Starting Your Engine

    Starting your engine move your shift lever to park (p) or neutral (n). Your engine won’t start in any other position – that’s a safety feature. To restart when you’re already moving, use neutral (n) only. Notice: do not try to shift to park (p) if your vehicle is moving. If you do, you could damage ...

  • Page 92: Engine Coolant Heater

    Engine coolant heater your vehicle may be equipped with an engine coolant heater. In very cold weather, 0°f ( − 18°c) or colder, the engine coolant heater can help. You’ll get easier starting and better fuel economy during engine warm-up. Usually, the coolant heater should be plugged in a minimum of...

  • Page 93: Caution:

    How long should you keep the coolant heater plugged in? The answer depends on the outside temperature, the kind of oil you have, and some other things. Instead of trying to list everything here, we ask that you contact your dealer in the area where you’ll be parking your vehicle. The dealer can give...

  • Page 94: Caution:

    If you cannot shift out of park (p), ease pressure on the shift lever. Push the shift lever all the way into park (p) while pressing the button on the shift lever as you maintain brake application. Then move the shift lever into the gear you wish. See shifting out of park (p) on page 2-31 . Notice: ...

  • Page 95

    Automatic overdrive (d): this position is for normal driving. If you need more power for passing, and you’re: • going less than 35 mph (55 km/h), push the accelerator pedal about halfway down. • going about 35 mph (55 km/h) or more, push the accelerator all the way down. The transmission will shift ...

  • Page 96

    Driver shift control (dsc) your automatic transmission has a driver shift control (dsc) feature that allows you to change gears similar to a manual transmission. To use the dcs feature: 1. Slide the shift lever over from automatic overdrive (d) to the right dsc area. When the transmission is in dsc ...

  • Page 97: All-Wheel Drive

    All-wheel drive if your vehicle is equipped with this feature, engine power is sent to all four wheels all the time. This is like four-wheel drive, but it is fully automatic. Parking brake the parking brake pedal is located on the lower portion of the instrument panel to the left of the steering whe...

  • Page 98: Shifting Into Park (P)

    Shifting into park (p) { caution: it can be dangerous to get out of your vehicle if the shift lever is not fully in park (p) with the parking brake firmly set. Your vehicle can roll. If you have left the engine running, the vehicle can move suddenly. You or others could be injured. To be sure your v...

  • Page 99: Shifting Out Of Park (P)

    If you have to leave your vehicle with the engine running, be sure your vehicle is in park (p) and your parking brake is firmly set before you leave it. After you’ve moved the shift lever into park (p), hold the regular brake pedal down. Then, see if you can move the shift lever away from park (p) w...

  • Page 100: Caution:

    Parking over things that burn { caution: things that can burn could touch hot exhaust parts under your vehicle and ignite. Do not park over papers, leaves, dry grass or other things that can burn. Engine exhaust { caution: engine exhaust can kill. It contains the gas carbon monoxide (co), which you ...

  • Page 101: Are Parked

    Running your engine while you are parked it is better not to park with the engine running. But if you ever have to, here are some things to know. { caution: idling the engine with the climate control system off could allow dangerous exhaust into your vehicle. See the earlier caution under engine exh...

  • Page 102: Mirrors

    Mirrors automatic dimming rearview mirror with onstar ® your vehicle may have an automatic dimming inside rearview mirror. The mirror also contains onstar ® controls. For more information about onstar ® , see onstar ® system on page 2-39 . O (on/off): this is the on/off button, located on the lower ...

  • Page 103

    Mirror operation the automatic dimming feature is active each time the vehicle is started. To turn the automatic dimming feature on or off, press and release the on/off button. The indicator light will illuminate when this feature is active. Compass operation press the on/off button once to turn the...

  • Page 104

    Compass variance compass variance is the difference between earth’s magnetic north and true geographic north. If the mirror is not adjusted for compass variance, your compass could give false readings. The mirror is set in zone eight upon leaving the factory. It will be necessary to adjust the compa...

  • Page 105

    Cleaning the mirror when cleaning the mirror, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror as that may cause the liquid cleaner to enter the mirror housing. Outside power heated mirrors the control on the driver’s door armrest o...

  • Page 106: Outside Convex Mirror

    Outside automatic dimming mirror your driver’s side mirror may have an automatic dimming feature. This helps to reduce glare from the headlamps of vehicles behind you. Outside curb view assist mirror if your vehicle is equipped with the memory seat and mirrors, it will also be capable of performing ...

  • Page 107: Onstar

    Onstar ® system onstar ® uses global positioning system (gps) satellite technology, wireless communications, and call centers to provide you with a wide range of safety, security, information and convenience services. A complete onstar ® user’s guide and the terms and conditions of the onstar ® subs...

  • Page 108: Homelink

    Luxury and leisure plan • all directions and connections plan services • personal concierge onstar ® personal calling with onstar ® personal calling, you have a safer way to stay connected while driving. It’s a hands-free wireless phone that’s integrated into your vehicle. You can place calls nation...

  • Page 109: Programming The Homelink

    This device complies with rss-210 of industry canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Changes and modifications...

  • Page 110

    Your vehicle’s engine should be turned off while programming the transmitter. Follow these steps to program up to three channels: 1. Press and hold down the two outside buttons, releasing only when the indicator light begins to flash, after 20 seconds. Do not hold down the buttons for longer than 30...

  • Page 111

    7. Firmly press and release the “learn” or “smart” button. The name and color of the button may vary by manufacturer. You will have 30 seconds to start step 8. 8. Return to the vehicle. Firmly press and hold the programmed homelink ® button for two seconds, then release. Repeat the press/hold/releas...

  • Page 112

    Using homelink ® press and hold the appropriate homelink ® button for at least half of a second. The indicator light will come on while the signal is being transmitted. Erasing homelink ® buttons to erase programming from the three buttons do the following: 1. Press and hold down the two outside but...

  • Page 113: Storage Areas

    Storage areas glove box the glove box is located in front of the passenger’s seat on the instrument panel. To lock the glove box door, insert your key into the lock cylinder and turn it clockwise. Turn the key counterclockwise to unlock the door. Cupholder(s) your vehicle has cupholders located betw...

  • Page 114: Luggage Carrier

    Luggage carrier { caution: if you try to carry something on top of your vehicle that is longer or wider than the luggage carrier — like paneling, plywood, a mattress and so forth — the wind can catch it as you drive along. This can cause you to lose control. What you are carrying could be violently ...

  • Page 115: Convenience Net

    Convenience net the convenience net attaches to the floor or back wall of the rear of the vehicle using six anchor points. The net can be used like a hammock across the rear of the vehicle or hooked on the floor. Put small loads, like grocery bags, behind the net. It can help keep them from falling ...

  • Page 116: Sunroof

    Sunroof sunroof (ultraview) { caution: people who are in a crash and not wearing a safety belt properly can suffer much worse injuries. They can hit things inside the vehicle or be ejected from it, and be seriously injured or killed. This is true for any vehicle occupant, in any motor vehicle, but i...

  • Page 117

    Anti-pinch feature if an object is in the path of the sunroof when it is closing, the anti-pinch feature will detect the object and stop the sunroof from closing at the point of the obstruction. The sunroof will then reverse. To close the sunroof once it has re-opened, remove the obstruction and pre...

  • Page 118: Sunroof (Ultraview Plus)

    Sunroof (ultraview plus) { caution: people who are in a crash and not wearing a safety belt properly can suffer much worse injuries. They can hit things inside the vehicle or be ejected from it, and be seriously injured or killed. This is true for any vehicle occupant, in any motor vehicle, but if y...

  • Page 119

    Press the back of the front sunshade switch to open the front sunshade. Press the front of the switch to close the sunshade. The sunshade can not be closed further than the glass panel. The rear sunroof is a vent only roof. Press the rear of the switch to vent the roof. Press the front of the switch...

  • Page 120: Vehicle Personalization

    Vehicle personalization memory seat and mirrors if your vehicle has the memory feature, you can program and recall memory settings for the driver’s seating and outside rearview mirror driving positions for up to two drivers. The buttons for this feature are located on the driver’s door armrest. Use ...

  • Page 121

    To stop recall movement of the memory feature at any time, press one of the power seat or mirror controls. Two personalized exit positions can also be programmed. Use the following steps to program exit positions: 1. Press memory seat button 1 or the button with the unlock symbol on the remote keyle...

  • Page 122: Notes

    ✍ notes 2-54.

  • Page 123: Section 3

    Instrument panel overview ...............................3-4 hazard warning flashers ................................3-6 other warning devices ...................................3-7 horn .............................................................3-7 tilt wheel ........................................

  • Page 124: Section 3

    Audio system(s) .............................................3-94 setting the time ...........................................3-94 radio with cd ..............................................3-95 navigation/radio system ..............................3-111 rear seat entertainment system ................

  • Page 125: Notes

    ✍ notes 3-3.

  • Page 126: Instrument Panel Overview

    Instrument panel overview 3-4.

  • Page 127

    The main components of the instrument panel are the following: a. Air outlets. See outlet adjustment on page 3-32 . B. Turn signal/multifunction lever. See turn signal/multifunction lever on page 3-8 . C. Steering wheel controls. See audio steering wheel controls on page 3-124 . D. Instrument panel ...

  • Page 128: Hazard Warning Flashers

    Hazard warning flashers your hazard warning flashers let you warn others. They also let police know you have a problem. Your front and rear turn signal lamps will flash on and off. The hazard warning button is located in the center of the instrument panel, between the two air vents. Your hazard warn...

  • Page 129: Other Warning Devices

    Other warning devices if you carry reflective triangles, you can set one up at the side of the road about 300 feet (100 m) behind your vehicle. Horn press on the pad near the horn symbols on the steering wheel to sound the horn. Tilt wheel a tilt wheel allows you to adjust the steering wheel before ...

  • Page 130

    Turn signal/multifunction lever the lever on the left side of the steering column includes the following: • turn and lane-change signals • headlamps • headlamp high/low beam-changer • flash-to-pass feature • fog lamps • cruise control for more information on the exterior lamps, see exterior lamps on...

  • Page 131

    Turn signal on chime if the turn signal is left on for about 1 mile (1.6 km), a warning chime will sound and the turn signal on message will appear on the driver information center (dic) display. See “turn signal on message” under dic warnings and messages on page 3-65 for more information. Headlamp...

  • Page 132

    Headlamps the exterior lamp control is located in the middle of the turn signal/multifunction lever. O (exterior lamp control): turn the control with this symbol on it to operate the exterior lamps. The exterior lamp control has four positions: o (on/off): turn the control to this position to turn o...

  • Page 133

    Wiper-activated headlamps this feature activates the headlamps and parking lamps after the windshield wipers have been in use for about six seconds. For this feature to work, the exterior lamp control must be in auto. When the exterior lamp control is off or in the parking lamp position and the wind...

  • Page 134: Caution:

    Cruise control these controls are located on the end of the multifunction lever. 9 (off): this position turns the system off. R (on): this position activates the system. + (resume/accelerate): push the lever to this symbol to make the vehicle resume to a previously set speed or to accelerate when cr...

  • Page 135: Caution:

    Setting cruise control { caution: if you leave your cruise control on when you are not using cruise, you might hit a button and go into cruise when you do not want to. You could be startled and even lose control. Keep the cruise control switch off until you want to use cruise control. 1. Move the cr...

  • Page 136

    Increasing speed while using cruise control there are two ways to go to a higher speed: • use the accelerator pedal to get to the higher speed. Press the set button at the end of the lever, then release the button and the accelerator pedal. You’ll now cruise at the higher speed. • move the cruise sw...

  • Page 137: Windshield Wiper Lever

    Windshield wiper lever windshield wipers the lever on the right side of the steering column operates the windshield wipers. 7 (mist): pull the lever down and release it for a single wiping cycle. The lever will return to its original position. For more cycles, hold the lever down before releasing it...

  • Page 138: Caution:

    6 (low speed): put the lever in this position for slow, steady wiping cycles. 1 (high speed): put the lever in this position for rapid wiping cycles. If the windshield wipers are in use for about six seconds while you are driving, the exterior lamps will come on automatically if the exterior lamp co...

  • Page 139

    If your vehicle is low on washer fluid, the check washer fluid message will appear on the driver information center (dic) display. See dic warnings and messages on page 3-65 for more information. If the headlamps are on when you wash the windshield, the headlamp washers (if equipped) will turn on. B...

  • Page 140: Cruise Control

    The headlamps must be on in order to be washed. If the headlamps are off, only the windshield will be washed when the washer button is pressed. To wash the headlamps, press the washer button located at the end of the windshield wiper lever. Both the headlamps and the windshield will be washed. See “...

  • Page 141

    When drl are on, only your front turn signal lamps will be on. No other exterior lamps will be on when the drl are being used. Your instrument panel won’t be lit up either. When the exterior lamp control is in auto and it’s dark enough outside, the drl will turn off and the low-beam headlamps will t...

  • Page 142

    Light sensor the light sensor for the drl and auto headlamp feature is located on top of the instrument panel. If you cover the sensor, it will read dark, and the exterior lamps or the headlamps suggested message will appear on the dic whenever the ignition is on. Exterior lighting battery saver if ...

  • Page 143: Interior Lamps

    Interior lamps instrument panel brightness the lever for this feature is located on the overhead console. Slide the lever toward the symbol to brighten the lights or away from it to dim them. If you slide the lever all the way toward the symbol past the resistance point, the interior lamps will come...

  • Page 144: (Urpa)

    Reading lamps the reading lamps are located on the overhead console. These lamps come on automatically when any door is opened. For manual operation, press the button next to each lamp to turn it on. Press it again to turn the lamp off. If the reading lamps are left on, they automatically shut off 1...

  • Page 145

    The urpa display is located inside the vehicle, above the liftgate glass. It has three color-coded lights that can be seen through the rearview mirror or by turning around. How the system works urpa comes on automatically when the shift lever is moved into reverse (r) and the vehicle speed is less t...

  • Page 146: Accessory Power Outlets

    When the system does not seem to work properly the light may flash red when the vehicle is in reverse (r) if the ultrasonic sensors are not kept clean. So be sure to keep your rear bumper free of mud, dirt, snow, ice and slush. Other conditions that may affect system performance include things like ...

  • Page 147

    Notice: leaving electrical equipment on for extended periods will drain the battery. Always turn off electrical equipment when not in use and do not plug in equipment that exceeds the maximum amperage rating. Certain accessory power plugs may not be compatible to the accessory power outlet and could...

  • Page 148: Climate Controls

    Cigarette lighter notice: holding a cigarette lighter in while it is heating will not allow the lighter to back away from the heating element when it is hot. Damage from overheating may occur to the lighter or heating element, or a fuse could be blown. Do not hold a cigarette lighter in while it is ...

  • Page 149

    Automatic operation auto (automatic): when this button is pressed and the temperature is set, the system will automatically control the inside temperature, the air delivery mode, the air conditioning compressor and the fan speed. Auto will appear on the display. 1. Press the auto button. 2. Adjust t...

  • Page 150

    Manual operation y n z (mode): pressing the mode switch and changing the mode cancels automatic operation and places the system in manual mode. Press auto to return to automatic operation. The outboard air outlets will always receive airflow regardless of the mode selected. See outlet adjustment on ...

  • Page 151

    H (recirculation): this mode keeps outside air from coming in the vehicle. It can be used to prevent outside air and odors from entering your vehicle or to help heat or cool the air inside your vehicle more quickly. Press this button to turn the recirculation mode on or off. The air-conditioning com...

  • Page 152

    Sensors there is a solar sensor located on the instrument panel, near the windshield. There is also an interior temperature sensor located to the right of the steering wheel on the instrument panel. These sensors monitor the solar radiation and the air inside your vehicle, then use the information t...

  • Page 153

    Defogging and defrosting fog on the inside of windows is a result of high humidity (moisture) condensing on the cool window glass. This can be minimized if the climate control system is used properly. There are two modes to clear fog from your windshield. Use the defog mode to clear the windows of f...

  • Page 154: Outlet Adjustment

    Rear window defogger the rear window defogger uses a warming grid to remove fog or frost from the rear window. The rear window defogger will only work when the ignition is in on. = (rear window defogger): press this button to turn the rear window defogger on or off. Be sure to clear as much snow fro...

  • Page 155

    J (side window defog): turn the thumbwheel to this symbol to use the side window defog setting. The air coming through the outlets will be directed toward the side windows to clear fog. K (open): turn the thumbwheel to this symbol to open the outlets completely and allow the maximum amount of air to...

  • Page 156

    Rear air conditioning system if your vehicle has the rear air conditioning system it has two fan speed selectors. One fan speed selector is located in the front overhead console and the other is located in the headliner above the second row seats. The rear air conditioning system is designed to prov...

  • Page 157

    Passenger compartment air filter the passenger compartment air filter traps most of the pollen from the air entering your vehicle. Like your vehicle’s engine air cleaner/filter, it needs to be changed periodically. For how often to change the passenger compartment air filter, see scheduled maintenan...

  • Page 158: Warning Lights, Gages And

    Warning lights, gages and indicators this part describes the warning lights and gages that may be on your vehicle. The pictures will help you locate them. Warning lights and gages can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement. Paying ...

  • Page 159: Instrument Panel Cluster

    Instrument panel cluster the instrument panel cluster is designed to let you know at a glance how your vehicle is running. You’ll know how fast you’re going, how much fuel you’re using and many of the other things you’ll need to know to drive safely and economically. United states version shown, can...

  • Page 160: Speedometer And Odometer

    Speedometer and odometer the speedometer lets you see your speed in either miles per hour (mph) or kilometers per hour (km/h). The odometer shows how far your vehicle has been driven, in either miles (used in the united states) or kilometers (used in canada). You may wonder what happens if a vehicle...

  • Page 161: Tachometer

    You can reset the selected trip odometer by pressing clr (clear) button located in the center of the info button to the right of the screen. The mileage for that trip odometer will return to zero. Each trip odometer must be reset individually. Using the navigation audio system, do the following: 1. ...

  • Page 162: Air Bag Readiness Light

    Engine speed limiter this feature prevents the engine from operating at too many revolutions per minute (rpm). When the engine’s rpm are too high, the throttle is closed to reduce speed, if this is not sufficient, then the fuel supply to the engine will be limited. When the rpms return to normal, th...

  • Page 163: Caution:

    { caution: if the air bag readiness light stays on after you start your vehicle, it means the air bag system may not be working properly. The air bags in your vehicle may not inflate in a crash, or they could even inflate without a crash. To help avoid injury to yourself or others, have your vehicle...

  • Page 164: Caution:

    Brake system warning light your vehicle’s hydraulic brake system is divided into two parts. If one part isn’t working, the other part can still work and stop you. For good braking, though, you need both parts working well. If the warning light comes on, there is a brake problem. Have your brake syst...

  • Page 165: Light

    Anti-lock brake system warning light with the anti-lock brake system, the light will come on when your engine is started and may stay on for several seconds. That’s normal. If the abs warning light comes on and stays on, there may be a problem with the antilock portion of the brake system. If the re...

  • Page 166: Warning Light

    Traction control system (tcs) warning light if the tc (traction control) warning light comes on and stays on, there may be a problem with the traction control system. The tc (traction control) warning light will come on briefly when you turn the ignition to on. If it doesn’t come on then, have it fi...

  • Page 167: Tire Pressure Light

    Engine coolant temperature gage this gage shows the engine coolant temperature. If the gage pointer moves into the shaded area, the engine is too hot. That reading means the same thing as the warning light – the engine coolant is very hot. See engine overheating on page 5-27 . Tire pressure light th...

  • Page 168: Malfunction Indicator Lamp

    Malfunction indicator lamp check engine light your vehicle is equipped with a computer which monitors operation of the fuel, ignition and emission control systems. This system is called obd ii (on-board diagnostics-second generation) and is intended to assure that emissions are at acceptable levels ...

  • Page 169

    If the light is flashing the following may prevent more serious damage to your vehicle: • reducing vehicle speed. • avoiding hard accelerations. • avoiding steep uphill grades. • if you are towing a trailer, reduce the amount of cargo being hauled as soon as it is possible. If the light stops flashi...

  • Page 170: Oil Pressure Light

    Emissions inspection and maintenance programs some state/provincial and local governments have or may begin programs to inspect the emission control equipment on your vehicle. Failure to pass this inspection could prevent you from getting a vehicle registration. Here are some things you need to know...

  • Page 171: Sport Mode Light

    This light tells you if there could be a problem with your engine oil pressure. The light goes on when you turn your key to on or start. It goes off once you start your engine. That’s a check to be sure the light works. If it doesn’t come on, be sure to have it fixed so it will be there to warn you ...

  • Page 172: Fog Lamp Light

    Fog lamp light this light will come on when the fog lamps are in use. The light will go out when the fog lamps are turned off. See “fog lamps” under turn signal/multifunction lever on page 3-8 for more information. Lights on reminder this light comes on whenever the parking lamps are on. See “headla...

  • Page 173: Fuel Gage

    Fuel gage the fuel gage shows approximately how much fuel is in the tank. It works only when the ignition is in on. If the fuel supply gets low, the fuel level low message will appear on the dic and a single chime will sound. Here are a few concerns some owners have had about the fuel gage. All of t...

  • Page 174: System Controls

    Driver information center (dic) the dic gives you the status of many of your vehicle’s systems. It is also used to display driver personalization features and warning/status messages. All messages will appear on the audio system display which is also the display for the navigation system. System con...

  • Page 175: Status Of Vehicle Systems

    If you have the navigation system, use the following to operate the dic. Briefly press the blue vehicle information button in the upper right corner of the screen. Each press of this button will scroll to the next available vehicle information item. The vehicle information menu allows you to select ...

  • Page 176

    Vehicle information menu (base audio system) to access this menu using the base audio system, press the up or down arrow on the info switch located to the right of the display. The following items are available when the ignition is in run. These items will not be available when the ignition is in ac...

  • Page 177

    Vehicle information menu (navigation system) to access the vehicle info menu using the navigation system, press and hold the vehicle information button in the upper right corner of the screen for three seconds. You can also access this menu through the main audio menu. See “main audio menu” in the i...

  • Page 178

    Vehicle information menu item descriptions the following paragraphs contain a more detailed description of each menu item: clock/outside air temp (navigation system): if you select this item, the clock and outside temperature will be displayed at the top of the screen. The outside temperature will b...

  • Page 179

    Gal fuel used/fuel used: if you select this item, the number of gallons or liters of fuel used since the last reset of this menu item is displayed. To reset gal fuel used using the base audio system, press the clr button located to the right of the screen. The display will return to zero. To reset t...

  • Page 180

    Timer/timer: if you select this item, a timing feature is displayed. The timer functions like a stopwatch in that you can record the time it takes to travel from one point to another. To turn on the timer using the base audio system, press the clr button located to the right of the screen once. To t...

  • Page 181

    Lf tire/left front tire pressure: if you select this item, the air pressure in the driver’s side front tire will be displayed. If the tire pressure is normal, ok will be displayed with this item. If the tire pressure is low, low will be displayed with this item. The pressure will be displayed in psi...

  • Page 182

    Engine oil life/engine oil life: if you select this item, the percentage of remaining oil life is displayed. If you see 99% oil life on the display, that means that 99% of the current oil life remains. When the oil life is depleted, the change engine oil message will appear on the display. You shoul...

  • Page 183: Dic Main Menu

    Dic main menu accessing the dic main menu (base audio system) there are two different procedures for accessing the dic main menu depending upon whether or not your vehicle has the navigation system. To access the main menu of the dic, do one of the following: • using the base audio system, press the...

  • Page 184

    Dic main menu item descriptions (base audio system) the following descriptions are for the base audio system. For information pertaining to the navigation audio system, see “ audio system” in the index of the srx entertainment and navigation system supplement supplied with your vehicle. E bass - mid...

  • Page 185

    Cat (category): this menu item allows you to select radio stations based on preset categories. To turn the cat feature on, press the tune/sel knob once. When cat is on, an x will be in the box next to cat on the menu. The x disappears when cat is off. See audio system(s) on page 3-94 for more inform...

  • Page 186

    9 (english/metric units): use this menu item to adjust the measurement units. You can choose between english units and metric units. To switch between the two, press the tune/sel knob. Once your choice is displayed, turn the knob to set your choice and continue scrolling through the main menu. The m...

  • Page 187: Dic Warnings And Messages

    Dic warnings and messages these messages will appear if there is a problem sensed in one of your vehicle’s systems. The text messages are the same for both the base audio and navigation systems unless otherwise indicated. You must acknowledge a message to clear it from the screen for further use. To...

  • Page 188

    Battery voltage low this message will appear when the electrical system is charging less than 10 volts or if the battery has been drained. If this message appears immediately after starting the engine, it is possible that the generator can still recharge the battery. The battery should recharge whil...

  • Page 189

    Change trans (transmission) fluid this message indicates that the life of the transmission fluid has expired and it should be changed within 200 miles. See scheduled maintenance on page 6-4 and recommended fluids and lubricants on page 6-11 for the proper fluid and change intervals. When you reset t...

  • Page 190

    Engine coolant hot – idle engine this message will appear when the engine coolant temperature is too hot. Stop and allow the vehicle to idle until it cools down. Notice: if you drive your vehicle while the engine is overheating, severe engine damage may occur. If an overheat warning appears on the i...

  • Page 191

    Headlamps suggested this message will appear when the amount of available light outside the vehicle is low and the exterior lamp control is off. This message informs the driver that turning on the exterior lamps is recommended even though the drl are still illuminated and it has become dark enough o...

  • Page 192

    Right rear door ajar when this message appears on the display, the right rear door it means that the passenger’s side rear door was not closed completely. You should check to make sure that the door is closed completely. Service ac (air conditioning) system this message appears when the electronic s...

  • Page 193

    Service stability system message your vehicle is equipped with a vehicle stability enhancement system called stabilitrak ® . See stabilitrak ® system on page 4-10 . The service stability system message will be displayed if there has been a problem detected with stabilitrak ® . If the service stabili...

  • Page 194

    Service suspension system this message is displayed to indicate that the suspension system is not operating properly. Have your vehicle serviced at your dealership. Service theft system this message means there is a problem with the immobilizer. See immobilizer on page 2-18 for more information. A f...

  • Page 195

    Top speed – fuel cut off this message will appear when the engine control module (ecm) detects that the maximum speed for your vehicle has been reached. Your vehicle’s top speed is based on the top speed rating of the tires. This ensures that your vehicle stays in a safe operating range for the tire...

  • Page 196

    Dic vehicle personalization your vehicle is equipped with personalization that allows you to program certain features to a preferred setting for up to two people. The number of programmable features varies depending upon which model of the vehicle is purchased. On all vehicles, features such as clim...

  • Page 197

    Navigation system 1. Turn the ignition to on without the engine running. Make the vehicle is in park (p). 2. If your vehicle has memory settings, press the appropriate memory button, 1 or 2, located on the driver’s door armrest. The dic display will show either driver 1 or 2 depending on which butto...

  • Page 198

    3. Turn the tune/sel knob until you reach the first letter you want; the letter will be highlighted. There is a complete alphabet with both upper and lower case letters and the numbers zero through nine. Also included are spaces and other non-letter characters such as the ampersand (&). 4. Press the...

  • Page 199

    Remote recall memory/recall driving positions if your vehicle has the optional memory package, you will have this feature. When this feature is turned on, you can recall any previously programmed seat, adjustable pedals and mirror controls when the unlock button on the remote keyless entry transmitt...

  • Page 200

    Remote exit recall if your vehicle has the optional memory package, you will have this feature. When this feature is turned on, you can recall any previously programmed exit position for the driver’s seat when the unlock button on the remote keyless entry transmitter is pressed. Programmable modes m...

  • Page 201

    Key in recall memory if your vehicle has the optional memory package, you will have this feature. When this feature is turned on, you can recall any previously programmed seat and mirror positions when the key is inserted into the ignition. Programmable modes mode 1: on mode 2: off before your vehic...

  • Page 202

    Auto exit seat if your vehicle has the optional memory package, you will have this feature. When this feature is turned on, you can recall any previously programmed exit position for the driver’s seat when the key is removed from the ignition and the driver’s door is opened. Programmable modes mode ...

  • Page 203

    Twilight delay this feature allows you to set the amount of time you want the exterior lamps to remain on after you exit the vehicle. Programmable modes mode 1: 0:00 seconds mode 2: 0:15 seconds mode 3: 0:30 seconds mode 4: 1:00 minute mode 5: 1:30 minutes mode 6: 2:00 minutes mode 7: 2:30 minutes m...

  • Page 204

    Lights flash at unlock this feature turns on the exterior lamps when the remote keyless entry transmitter is used to unlock the vehicle. The lamps will remain on for approximately 20 seconds unless a door is opened, the ignition is turned to accessory, on or start or the remote keyless entry transmi...

  • Page 205

    Lights flash at lock this feature allows the exterior lamps to flash once when the remote keyless entry transmitter is used to lock the vehicle. All doors must be closed for this feature to work, and the lamps will not flash if the parking lamps or headlamps are on. Programmable modes mode 1: on mod...

  • Page 206

    Horn sounds at lock this feature sounds the horn once when the remote keyless entry transmitter is used to lock the vehicle. All doors must be closed for this feature to work. Programmable modes mode 1: on mode 2: off before your vehicle was shipped from the factory, it was programmed to mode 2. The...

  • Page 207

    Exterior lights at unlock this feature turns on the exterior lamps when the remote keyless entry transmitter is used to unlock the vehicle. The lamps will remain on for about 20 seconds unless a door is opened, the ignition is turned to accessory, on or start or the remote keyless entry transmitter ...

  • Page 208

    Driver unlock in park the feature allows the driver’s door to automatically unlock when the transmission is shifted into park (p). Programmable modes mode 1: on mode 2: off before your vehicle was shipped from the factory, it was programmed to mode 2. The mode to which the vehicle was programmed may...

  • Page 209

    Driver unlock key out this feature allows the driver’s door to automatically unlock when the key is removed from the ignition. Programmable modes mode 1: on mode 2: off before your vehicle was shipped from the factory, it was programmed to mode 2. The mode to which the vehicle was programmed may hav...

  • Page 210

    Doors unlock in park the feature allows the doors to automatically unlock when the transmission is shifted into park (p). Programmable modes mode 1: on mode 2: off before your vehicle was shipped from the factory, it was programmed to mode 2. The mode to which the vehicle was programmed may have bee...

  • Page 211

    Doors unlock key out this feature allows the doors to automatically unlock when the key is removed from the ignition. Programmable modes mode 1: on mode 2: off before your vehicle was shipped from the factory, it was programmed to mode 2. The mode to which the vehicle was programmed may have been ch...

  • Page 212

    Delayed locking this feature delays the locking of the vehicle’s doors for up to five seconds after a power door lock switch or the lock button on the remote keyless entry transmitter is pressed. The five second delay occurs after the last door is closed. Programmable modes mode 1: on mode 2: off be...

  • Page 213

    Lock passenger window this feature allows you to disable either all the passenger window switches or the rear passenger window switches only. If this feature is turned on, all passenger window switches will be disabled when the window lockout button is pressed. If the feature is off, only the rear p...

  • Page 214

    Mirror to curb in reverse if your vehicle has the optional memory package, you will have this feature. When this feature is turned on, the passenger’s outside rearview mirror will move downward so you can view the curb when the shift lever is shifted into reverse (r). The mirror will return to the l...

  • Page 215

    Enhanced chime volume this feature allows you to adjust the volume level of the vehicle’s warning chimes. The chime volume cannot be turned off, only adjusted. Programmable modes mode 1: normal mode 2: loud before your vehicle was shipped from the factory, it was programmed to mode 1. The mode to wh...

  • Page 216: Audio System(S)

    Audio system(s) notice: before you add any sound equipment to your vehicle – like a tape player, cb radio, mobile telephone or two-way radio – be sure you can add what you want. If you can, it’s very important to do it properly. Added sound equipment may interfere with the operation of your vehicle’...

  • Page 217: Radio With Cd

    Radio with cd radio data system (rds) your audio system is equipped with a radio data system (rds). Rds features are available for use only on fm stations that broadcast rds information. With rds, your radio can do the following: • seek to stations broadcasting the selected type of programming • rec...

  • Page 218

    Xm™ satellite radio service (48 contiguous us states) xm™ is a continental u.S. Based satellite radio service that offers 100 coast to coast channels including music, news, sports, talk, and children’s programming. Xm™ provides digital quality audio and text information, including song title and art...

  • Page 219

    Finding a station band: press this button to select fm1, fm2, or am, or xm1 or xm2 (48 contiguous us states, if equipped). Q seek r : press the up or the down arrow to seek to the next or to the previous station and stay there. Seek will appear on the display. The sound will mute while seeking. The ...

  • Page 220

    Setting preset stations the six numbered pushbuttons let you return to your favorite stations. You can set up to 30 stations (six fm1, six fm2, and six am, six xm1 and six xm2 (48 contiguous us states, if equipped), by performing the following steps: to set your preset stations manually, perform the...

  • Page 221

    Presets home/away: this feature gives you the ability to store two different kinds of station presets. Home can be used for stations available where you live and away can be for stations available outside of your local broadcasting area. To set preset stations for home and away perform the following...

  • Page 222

    Adjusting the speakers (balance/fade) to adjust the balance or fade, perform the following steps: 1. Press the tune/sel knob to enter the main menu. 2. Turn the tune/sel knob until bass-mid-treble appears on the display. 3. Press the tune/sel knob to enter into the tone settings. 4. Press the tune/s...

  • Page 223

    Dsp normal: this setting provides the best overall audio performance for all passengers. Dsp normal will not be displayed when in this mode. Talk: this setting should be used when listening to non-musical material such as news, talk shows, sports broadcasts, and books on tape. Talk makes spoken word...

  • Page 224

    If you would like to display the message, perform the following steps: 1. Press the tune/sel knob to enter the main menu. 2. Turn the tune/sel knob until recall rds message appears on the display. 3. Press the tune/sel knob. The message will appear on the display. Once the message has been displayed...

  • Page 225

    Activating program type (pty) stations (rds and xm™) pty allows you to search for stations with specific types of music. The selectable ptys are pop, easy, talk, cntry (country), class (classical), and jazz. To activate program types, perform the following steps: 1. Press the tune/sel knob to enter ...

  • Page 226

    Xm™ radio messages radio display message condition action required xl (explicit language channels) xl on the radio display, after the channel name, indicates content with explicit language. These channels, or any others, can be blocked at a customer’s request, by calling 1-800-852-xmxm (9696). Xm up...

  • Page 227

    Xm™ radio messages (cont’d) radio display message condition action required no cat info category name not available no category information is available at this time on this channel. Your system is working properly. Not found no channel available for the chosen category there are no channels availab...

  • Page 228

    Using the single cd player insert a cd partway into the slot, label side up. The player will pull it in. If the ignition and the radio are on the cd will begin playing. Cd will appear on the display. A cd may be loaded with the radio off but it will not start playing until the radio is on. If you tu...

  • Page 229

    F6 disp (display): press this pushbutton to display the time of the track. Press this pushbutton again to remove the time of the track from the display. Q seek r : press the up or the down arrow to seek to the next or to the previous track on the cd. Q scan: press this button to listen to each track...

  • Page 230

    When a cd is inserted, cd will appear on the display, the number of the cd and the track number will appear on the display if the radio is on. If the radio is on, the cd will begin to play automatically. To insert multiple cds, do the following: 1. The ignition and the radio can be on or off. 2. Pre...

  • Page 231

    • rpt trck (repeat track): repeats the track over again. Rpt trck will appear on the display. Press the mode pushbutton again to turn off repeat play. Rpt trck will disappear from the display. • rpt cd (repeat cd): repeats the cd over again. Rpt disc will appear on the display. Press the mode pushbu...

  • Page 232

    Cd messages if the cd comes out, it could be for one of the following reasons: • if it is very hot. When the temperature returns to normal, the cd should play. • if you are driving on a very rough road. When the road becomes smooth the cd should play. • the cd is dirty, scratched, wet, or upside dow...

  • Page 233: Navigation/radio System

    7. Press the tune/sel knob to select the configurable key to change. 8. Turn the tune/sel knob to find the feature that you would like to store to the key. 9. Press the tune/sel knob when you have found the feature to be stored. The display will update, by showing the symbol of the feature that you ...

  • Page 234

    Rear seat entertainment system your vehicle may have the optional digital versatile disc (dvd) rear seat entertainment (rse) system. The rse system includes a dvd player, a video display screen, two sets of wireless headphones, and a remote control. Rse is available in a base and an uplevel version....

  • Page 235

    Dvd player buttons o (power): press this button to turn the rse system on or off. X (eject): press this button to eject a dvd or a cd. Srce (source): press this button to cycle through the available video modes. Auxiliary is available when something is plugged into the available auxiliary jacks on t...

  • Page 236

    Y (menu): press this button to access the dvd menu. This button only operates with a dvd. If your vehicle is equipped with the tv option, the menu button will bring up a tv specific menu. Z (display menu): press this button to modify the video screen display characteristics. N , q , p , o (menu navi...

  • Page 237

    Some dvds will not allow you to fast forward or skip the copyright or previews. Some dvds will begin playing after the previews have finished. If the dvd does not begin to play the main title, refer to the on-screen instructions, as the dvd may be displaying its main title menu. Stopping and resume ...

  • Page 238

    Parental control button: this button is located on the navigation system screen. Press this button while a dvd or cd is playing to freeze the video and mute the audio. The video screen will display parental control on and the power indicator light on the dvd player will flash. It will also disable a...

  • Page 239

    Remote control buttons o (power): press this button to turn the dvd player on or off. P (illumination): press this button to turn the remote control backlight on for 8 seconds. V (title): press this button to access the multiple titles (if available) of a dvd. Y (menu): press this button to access t...

  • Page 240

    O (right): press this button to move to the right of the menu list of a dvd. R (enter): press this button to select items within a menu. E (audio): press this button to open a menu that will operate only when a dvd is being played. The format and content of this function is defined by the disc and i...

  • Page 241

    Battery replacement to change the batteries, do the following: 1. Remove the battery compartment door located on the bottom of the remote control. 2. Replace the two aa batteries in the compartment. Make sure that they are installed correctly. 3. Close the battery door securely. Notice: do not store...

  • Page 242

    Battery replacement to change the batteries, do the following: 1. Loosen the screw on the battery compartment door located on the left side of the headphone earpiece. 2. Replace the two aaa batteries in the compartment. Make sure that they are installed correctly. 3. Tighten the screws to close the ...

  • Page 243

    How to change the video format when in the auxiliary mode the auxiliary input video format is preset to ntsc. In some countries, the video format may be in pal system. To change the video format, perform the following: 1. Press the display menu button. 2. Press the navigation down arrow key to scrol...

  • Page 244

    Problem recommended action no power. The ignition might not be in on or accessory. The parental control button might have been turned on. (the power indicator light will flash.) disc will not play. The system might be off. The parental control button might have been turned on. (the power indicator l...

  • Page 245

    Problem recommended action the remote control does not work. Point the remote control directly at the infrared window below the video screen while using. Check that the batteries are not dead or put in wrong. The parental control button might have been turned on. (the power indicator light will flas...

  • Page 246: Theft-Deterrent Feature

    Theft-deterrent feature theftlock ® is designed to discourage theft of your radio. Your vehicle has a “built in” theft-deterrent feature on each radio that is automatic – there is no programming required. The radio in your vehicle cannot be used in any other vehicle. When the radio was originally in...

  • Page 247

    G (onstar/voice recognition): if your vehicle has the radio with cd or radio with six-disc cd audio system, you can press this button to interact with the onstar ® system. See the onstar ® manual provided with your vehicle for more information. If your vehicle has the optional navigation system, you...

  • Page 248: Dvd Distortion

    Dvd distortion you may experience audio distortion in the ir headphones when operating cellular phones, scanners, cb radios, global positioning systems (gps)*, two-way radios, mobile fax, or walkie talkies. It may be necessary to turn off the dvd player when operating one of these devices in or near...

  • Page 249: Cleaning Your Dvd Player

    Care of your cds and dvds handle discs carefully. Store them in their original cases or other protective cases and away from direct sunlight and dust. If the surface of a disc is soiled, dampen a clean, soft cloth in a mild, neutral detergent solution and clean it, wiping from the center to the edge...

  • Page 250: Diversity Antenna System

    Diversity antenna system your am-fm antenna is integrated with your rear quarter glass windows, located in the rear of the vehicle on the driver and passenger sides. Be sure that the inside surface of the rear windows are not scratched and that the lines on the glass are not damaged. If the inside s...

  • Page 251: Section 4

    Your driving, the road, and your vehicle ..........4-2 defensive driving ...........................................4-2 drunken driving .............................................4-2 control of a vehicle ........................................4-5 braking .............................................

  • Page 252: Your Vehicle

    Your driving, the road, and your vehicle defensive driving the best advice anyone can give about driving is: drive defensively. Please start with a very important safety device in your vehicle: buckle up. See safety belts: they are for everyone on page 1-8 . Defensive driving really means “be ready ...

  • Page 253

    Police records show that almost half of all motor vehicle-related deaths involve alcohol. In most cases, these deaths are the result of someone who was drinking and driving. In recent years, more than 16,000 annual motor vehicle-related deaths have been associated with the use of alcohol, with more ...

  • Page 254

    It is the amount of alcohol that counts. For example, if the same person drank three double martinis (3 ounces or 90 ml of liquor each) within an hour, the person’s bac would be close to 0.12 percent. A person who consumes food just before or during drinking will have a somewhat lower bac level. The...

  • Page 255: Caution:

    There is something else about drinking and driving that many people do not know. Medical research shows that alcohol in a person’s system can make crash injuries worse, especially injuries to the brain, spinal cord or heart. This means that when anyone who has been drinking — driver or passenger — i...

  • Page 256: Braking

    Braking braking action involves perception time and reaction time. First, you have to decide to push on the brake pedal. That is perception time. Then you have to bring up your foot and do it. That is reaction time. Average reaction time is about 3/4 of a second. But that is only an average. It migh...

  • Page 257

    Anti-lock brake system your vehicle has anti-lock brakes. Abs is an advanced electronic braking system that will help prevent a braking skid. When you start your engine and begin to drive away, your anti-lock brake system will check itself. You may hear a momentary motor or clicking noise while this...

  • Page 258

    The anti-lock system can change the brake pressure faster than any driver could. The computer is programmed to make the most of available tire and road conditions. This can help you steer around the obstacle while braking hard. As you brake, your computer keeps receiving updates on wheel speed and c...

  • Page 259

    Traction control system (tcs) your vehicle has a traction control system that limits wheel spin. This is especially useful in slippery road conditions. On a rear-wheel-drive vehicle, the system operates if it senses that one or both of the rear wheels are spinning or beginning to lose traction. On a...

  • Page 260: Magnetic Ride Control

    To turn the system off, press the tc (traction control) button located near the shift lever. If you press the tc button once, the traction control system will turn off and the traction control system warning light will come on. Press the tc button again to turn the system back on. If you press and h...

  • Page 261: Panic Brake Assist

    When the system activates, a stability system engaged message will be displayed on the driver information center. See dic warnings and messages on page 3-65 . You may also hear a noise or feel vibration in the brake pedal. This is normal. Continue to steer the vehicle in the direction you want it to...

  • Page 262: Steering

    Steering power steering if you lose power steering assist because the engine stops or the system is not functioning, you can steer but it will take much more effort. Steering tips driving on curves it is important to take curves at a reasonable speed. A lot of the “driver lost control” accidents men...

  • Page 263

    Steering in emergencies there are times when steering can be more effective than braking. For example, you come over a hill and find a truck stopped in your lane, or a car suddenly pulls out from nowhere, or a child darts out from between parked cars and stops right in front of you. You can avoid th...

  • Page 264: Off-Road Recovery

    Off-road recovery you may find that your right wheels have dropped off the edge of a road onto the shoulder while you are driving. If the level of the shoulder is only slightly below the pavement, recovery should be fairly easy. Ease off the accelerator and then, if there is nothing in the way, stee...

  • Page 265

    • do not get too close to the vehicle you want to pass while you are awaiting an opportunity. For one thing, following too closely reduces your area of vision, especially if you are following a larger vehicle. Also, you will not have adequate space if the vehicle ahead suddenly slows or stops. Keep ...

  • Page 266: Loss Of Control

    Loss of control let us review what driving experts say about what happens when the three control systems (brakes, steering and acceleration) do not have enough friction where the tires meet the road to do what the driver has asked. In any emergency, do not give up. Keep trying to steer and constantl...

  • Page 267: Vehicle Off Paved Roads

    Operating your all-wheel-drive vehicle off paved roads this off-road guide is for vehicles that have all-wheel drive. If your vehicle does not have all-wheel drive, you should not drive off-road unless you are on a level, solid surface. Many of the same design features that help make your vehicle re...

  • Page 268: Caution:

    Loading your vehicle for off-road driving there are some important things to remember about how to load your vehicle. • the heaviest things should be on the load floor and forward of your rear axle. Put heavier items as far forward as you can. • be sure the load is secured properly, so driving on th...

  • Page 269

    Environmental concerns off-road driving can provide wholesome and satisfying recreation. However, it also raises environmental concerns. We recognize these concerns and urge every off-roader to follow these basic rules for protecting the environment: • always use established trails, roads and areas ...

  • Page 270: Caution:

    Controlling your vehicle is the key to successful off-road driving. One of the best ways to control your vehicle is to control your speed. Here are some things to keep in mind. At higher speeds: • you approach things faster and you have less time to scan the terrain for obstacles. • you have less ti...

  • Page 271: Caution:

    When you drive over obstacles or rough terrain, keep a firm grip on the steering wheel. Ruts, troughs or other surface features can jerk the wheel out of your hands if you are not prepared. When you drive over bumps, rocks, or other obstacles, your wheels can leave the ground. If this happens, even ...

  • Page 272

    Approaching a hill when you approach a hill, you need to decide if it is one of those hills that is just too steep to climb, descend or cross. Steepness can be hard to judge. On a very small hill, for example, there may be a smooth, constant incline with only a small change in elevation where you ca...

  • Page 273: Caution:

    { caution: turning or driving across steep hills can be dangerous. You could lose traction, slide sideways, and possibly roll over. You could be seriously injured or killed. When driving up hills, always try to go straight up. • ease up on your speed as you approach the top of the hill. • attach a f...

  • Page 274

    Q: what should i do if my vehicle stalls, or is about to stall, and i can not make it up the hill? A: if this happens, there are some things you should do, and there are some things you must not do? First, here is what you should do: • push the brake pedal to stop the vehicle and keep it from rollin...

  • Page 275: Caution:

    Q: suppose, after stalling, i try to back down the hill and decide i just can not do it. What should i do? A: set the parking brake, put your transmission in park (p) and turn off the engine. Leave the vehicle and go get some help. Exit on the uphill side and stay clear of the path the vehicle would...

  • Page 276

    Q: are there some things i should not do when driving down a hill? A: yes! These are important because if you ignore them you could lose control and have a serious accident. • when driving downhill, avoid turns that take you across the incline of the hill. A hill that is not too steep to drive down ...

  • Page 277: Caution:

    Driving across an incline sooner or later, an off-road trail will probably go across the incline of a hill. If this happens, you have to decide whether to try to drive across the incline. Here are some things to consider: • a hill that can be driven straight up or down may be too steep to drive acro...

  • Page 278: Caution:

    Stalling on an incline if your vehicle stalls when you are crossing an incline, be sure you (and your passengers) get out on the uphill side, even if the door there is harder to open. If you get out on the downhill side and the vehicle starts to roll over, you will be right in its path. If you have ...

  • Page 279: Caution:

    Driving in mud, sand, snow or ice when you drive in mud, snow or sand, your wheels will not get good traction. You can not accelerate as quickly, turning is more difficult, and you will need longer braking distances. It is best to use a low gear when you are in mud — the deeper the mud, the lower th...

  • Page 280: Caution:

    Driving in water heavy rain can mean flash flooding, and flood waters demand extreme caution. Find out how deep the water is before you drive through it. If it is deep enough to cover your wheel hubs, axles or exhaust pipe, do not try it — you probably will not get through. Also, water that deep can...

  • Page 281: Driving At Night

    After off-road driving remove any brush or debris that has collected on the underbody, chassis or under the hood. These accumulations can be a fire hazard. After operation in mud or sand, have the brake linings cleaned and checked. These substances can cause glazing and uneven braking. Check the bod...

  • Page 282

    Here are some tips on night driving. • drive defensively. • do not drink and drive. • since you can not see as well, you may need to slow down and keep more space between you and other vehicles. • slow down, especially on higher speed roads. Your headlamps can light up only so much road ahead. • in ...

  • Page 283

    Driving in rain and on wet roads rain and wet roads can mean driving trouble. On a wet road, you can not stop, accelerate or turn as well because your tire-to-road traction is not as good as on dry roads. And, if your tires do not have much tread left, you will get even less traction. It is always w...

  • Page 284: Caution:

    Driving too fast through large water puddles or even going through some car washes can cause problems, too. The water may affect your brakes. Try to avoid puddles. But if you can not, try to slow down before you hit them. { caution: wet brakes can cause accidents. They will not work as well in a qui...

  • Page 285: Caution:

    Hydroplaning hydroplaning is dangerous. So much water can build up under your tires that they can actually ride on the water. This can happen if the road is wet enough and you are going fast enough. When your vehicle is hydroplaning, it has little or no contact with the road. Hydroplaning does not h...

  • Page 286: City Driving

    City driving one of the biggest problems with city streets is the amount of traffic on them. You will want to watch out for what the other drivers are doing and pay attention to traffic signals. Here are ways to increase your safety in city driving: • know the best way to get to where you are going....

  • Page 287: Freeway Driving

    Freeway driving mile for mile, freeways (also called thruways, parkways, expressways, turnpikes or superhighways) are the safest of all roads. But they have their own special rules. The most important advice on freeway driving is: keep up with traffic and keep to the right. Drive at the same speed m...

  • Page 288

    When you want to leave the freeway, move to the proper lane well in advance. If you miss your exit, do not, under any circumstances, stop and back up. Drive on to the next exit. The exit ramp can be curved, sometimes quite sharply. The exit speed is usually posted. Reduce your speed according to you...

  • Page 289: Highway Hypnosis

    Highway hypnosis is there actually such a condition as “highway hypnosis”? Or is it just plain falling asleep at the wheel? Call it highway hypnosis, lack of awareness, or whatever. There is something about an easy stretch of road with the same scenery, along with the hum of the tires on the road, t...

  • Page 290: Caution:

    If you drive regularly in steep country, or if you are planning to visit there, here are some tips that can make your trips safer and more enjoyable. • keep your vehicle in good shape. Check all fluid levels and also the brakes, tires, cooling system and transaxle. These parts can work hard on mount...

  • Page 291: Winter Driving

    Winter driving here are some tips for winter driving: • have your vehicle in good shape for winter. • you may want to put winter emergency supplies in your vehicle. Include an ice scraper, a small brush or broom, a supply of windshield washer fluid, a rag, some winter outer clothing, a small shovel,...

  • Page 292

    What is the worst time for this? “wet ice.” very cold snow or ice can be slick and hard to drive on. But wet ice can be even more trouble because it may offer the least traction of all. You can get wet ice when it is about freezing (32°f; 0°c) and freezing rain begins to fall. Try to avoid driving o...

  • Page 293

    If you are caught in a blizzard if you are stopped by heavy snow, you could be in a serious situation. You should probably stay with your vehicle unless you know for sure that you are near help and you can hike through the snow. Here are some things to do to summon help and keep yourself and your pa...

  • Page 294: Caution:

    You can run the engine to keep warm, but be careful. { caution: snow can trap exhaust gases under your vehicle. This can cause deadly co (carbon monoxide) gas to get inside. Co could overcome you and kill you. You can not see it or smell it, so you might not know it is in your vehicle. Clear away sn...

  • Page 295: Or Snow

    Then, shut the engine off and close the window almost all the way to preserve the heat. Start the engine again and repeat this only when you feel really uncomfortable from the cold. But do it as little as possible. Preserve the fuel as long as you can. To help keep warm, you can get out of the vehic...

  • Page 296: Caution:

    Rocking your vehicle to get it out first, turn your steering wheel left and right. That will clear the area around your front wheels. If your vehicle has the stabilitrak ® system, turn the system off by pressing and holding the traction button so that the stability sys disabled message and the tract...

  • Page 297: Towing

    Towing towing your vehicle consult your dealer or a professional towing service if you need to have your disabled vehicle towed. See roadside service on page 7-6 . If you want to tow your vehicle behind another vehicle for recreational purposes (such as behind a motorhome), see recreational vehicle ...

  • Page 298: Loading Your Vehicle

    Dolly towing if your vehicle is a rear-wheel drive, it can be towed using a dolly. If you have an all-wheel-drive (awd) vehicle, it can only be towed on a flat-bed trailer. To tow your vehicle using a dolly, follow these steps: 1. Put the rear wheels on the dolly. 2. Put the vehicle in park (p). 3. ...

  • Page 299

    Tire and loading information label a. Vehicle capacity weight the tire and loading information label is attached to the center pillar, near the driver’s door latch. Vehicles without a center pillar will have the tire and loading information label attached to the driver’s door edge. This label lists ...

  • Page 300

    4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the “xxx” amount equals 1400 lbs. And there will be five 150 lb. Passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1400 − 750 (5 x 150) = 650 lbs.). ...

  • Page 301

    Loading your vehicle item description total a vehicle capacity weight for example 2 = 1,000 lbs (453 kg) b subtract occupant weight 150 lbs (68 kg) × 5 = 750 lbs (340 kg) c available cargo weight = 250 lbs (113 kg) loading your vehicle item description total a vehicle capacity weight for example 3 =...

  • Page 302: Caution:

    Certification/tire label the certification/tire label is found on the driver’s door edge. The label shows the size of your original tires and the inflation pressures needed to obtain the gross weight capacity of your vehicle. This is called the gross vehicle weight rating (gvwr). The gvwr includes t...

  • Page 303: Caution:

    If you put things inside your vehicle — like suitcases, tools, packages, or anything else — they will go as fast as the vehicle goes. If you have to stop or turn quickly, or if there is a crash, they’ll keep going. { caution: things you put inside your vehicle can strike and injure people in a sudde...

  • Page 304: Towing A Trailer

    Towing a trailer { caution: if you do not use the correct equipment and drive properly, you can lose control when you pull a trailer. For example, if the trailer is too heavy, the brakes may not work well — or even at all. You and your passengers could be seriously injured. You may also damage your ...

  • Page 305

    If you do decide to pull a trailer if you do, here are some important points: • there are many different laws, including speed limit restrictions, having to do with trailering. Make sure your rig will be legal, not only where you live but also where you’ll be driving. A good source for this informat...

  • Page 306

    Weight of the trailer tongue the tongue load (a) of any trailer is an important weight to measure because it affects the total or gross weight of your vehicle. The gross vehicle weight (gvw) includes the curb weight of the vehicle, any cargo you may carry in it, and the people who will be riding in ...

  • Page 307

    Total weight on your vehicle’s tires be sure your vehicle’s tires are inflated to the upper limit for cold tires. You’ll find these numbers on the certification/tire label. See loading your vehicle on page 4-48 . Then be sure you don’t go over the gvw limit for your vehicle, including the weight of ...

  • Page 308

    Driving with a trailer towing a trailer requires a certain amount of experience. Before setting out for the open road, you’ll want to get to know your rig. Acquaint yourself with the feel of handling and braking with the added weight of the trailer. And always keep in mind that the vehicle you are d...

  • Page 309: Caution:

    Turn signals when towing a trailer when you tow a trailer, your vehicle may need a different turn signal flasher and/or extra wiring. Check with your dealer. The arrows on your instrument panel will flash whenever you signal a turn or lane change. Properly hooked up, the trailer lamps will also flas...

  • Page 310

    When you are ready to leave after parking on a hill 1. Apply your regular brakes and hold the pedal down while you: • start your engine, • shift into a gear, and • release the parking brake. 2. Let up on the brake pedal. 3. Drive slowly until the trailer is clear of the chocks. 4. Stop and have some...

  • Page 311: Section 5

    Service ............................................................5-3 doing your own service work .........................5-3 adding equipment to the outside of your vehicle ...........................................5-4 fuel ................................................................5-4 gas...

  • Page 312: Section 5

    Buying new tires .........................................5-73 uniform tire quality grading ..........................5-74 wheel alignment and tire balance ..................5-75 wheel replacement ......................................5-75 tire chains ...................................................

  • Page 313: Service

    Service your dealer knows your vehicle best and wants you to be happy with it. We hope you will go to your dealer for all your service needs. You will get genuine gm parts and gm-trained and supported service people. We hope you will want to keep your gm vehicle all gm. Genuine gm parts have one of ...

  • Page 314: Of Your Vehicle

    Caution: (continued) • be sure you have sufficient knowledge, experience, the proper replacement parts and tools before you attempt any vehicle maintenance task. • be sure to use the proper nuts, bolts and other fasteners. “english” and “metric” fasteners can be easily confused. If you use the wrong...

  • Page 315: Gasoline Specifications

    Gasoline specifications it is recommended that gasoline meet specifications which were developed by automobile manufacturers around the world and contained in the world-wide fuel charter which is available from the alliance of automobile manufacturers at www.Autoalliance.Org. Gasoline meeting these ...

  • Page 316: Additives

    Additives to provide cleaner air, all gasolines in the united states are now required to contain additives that will help prevent engine and fuel system deposits from forming, allowing your emission control system to work properly. You should not have to add anything to your fuel. However, some gaso...

  • Page 317: Filling Your Tank

    Filling your tank { caution: fuel vapor burns violently and a fuel fire can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the pump island. Turn off your engine when you are refueling. Do not smoke if you are near fuel or refueling your vehicle....

  • Page 318: Caution:

    While refueling, hang the fuel cap by the tether from the hook on the fuel door. To remove the fuel cap, turn it slowly to the left (counterclockwise). The fuel cap has a spring in it; if you let go of the cap too soon, it will spring back to the right. { caution: if you spill fuel and then somethin...

  • Page 319: Caution:

    When you put the fuel cap back on, turn it to the right (clockwise) until you hear a clicking sound. Make sure you fully install the cap. The diagnostic system can determine if the fuel cap has been left off or improperly installed. This would allow fuel to evaporate into the atmosphere. See malfunc...

  • Page 320: Caution:

    Filling a portable fuel container { caution: never fill a portable fuel container while it is in your vehicle. Static electricity discharge from the container can ignite the gasoline vapor. You can be badly burned and your vehicle damaged if this occurs. To help avoid injury to you and others: • dis...

  • Page 321: Hood Release

    Hood release to lift the hood, use the following steps: 1. Pull the lever inside the vehicle to open the hood. It is located on the lower left side of the instrument panel. 2. Then go to the front of the vehicle and find the secondary hood release lever. The lever is located under the front edge of ...

  • Page 322

    Engine compartment overview when you open the hood on the 3.6l v6, you’ll see the following: 5-12.

  • Page 323

    A. Underhood fuse block. See fuses and circuit breakers on page 5-100 . B. Windshield washer fluid reservoir. See windshield washer fluid on page 5-37 . C. Battery. See battery on page 5-41 . D. Power steering fluid reservoir. See power steering fluid on page 5-36 . E. Engine oil fill cap. See engin...

  • Page 324

    When you open the hood on the 4.6l v8, you’ll see the following: 5-14.

  • Page 325

    A. Underhood fuse block. See fuses and circuit breakers on page 5-100 . B. Battery. See battery on page 5-41 . C. Passenger compartment air filter. See passenger compartment air filter on page 3-35 . D. Windshield washer fluid reservoir. See windshield washer fluid on page 5-37 . E. Power steering f...

  • Page 326: Engine Oil

    Engine oil if the oil pressure light and/or the oil pressure low — stop engine message on the dic appears on the instrument cluster, it means you need to check your engine oil level right away. For more information, see “oil pressure low — stop engine” under dic warnings and messages on page 3-65 an...

  • Page 327

    When to add engine oil if the oil is below the cross-hatched area at the tip of the dipstick for the 3.6l v6 engine or below the indentation at the tip of the dipstick for the 4.6l v8 engine, then you will need to add at least one quart of oil. But you must use the right kind. This section explains ...

  • Page 328

    What kind of engine oil to use look for two things: • gm4718m your vehicle’s engine requires a special oil meeting gm standard gm4718m. Oils meeting this standard may be identified as synthetic. However, not all synthetic oils will meet this gm standard. You should look for and use only an oil that ...

  • Page 329

    • sae 5w-30 as shown in the viscosity chart, sae 5w-30 is best for your vehicle. However, you can use sae 10w-30 if it is going to be 0°f (–18°c) or above. These numbers on an oil container show its viscosity, or thickness. Do not use other viscosity oils such as sae 20w-50. Oils meeting these requi...

  • Page 330

    When to change engine oil (gm oil life system) your vehicle has a computer system that lets you know when to change the engine oil and filter. This is based on engine revolutions and engine temperature, and not on mileage. Based on driving conditions, the mileage at which an oil change will be indic...

  • Page 331

    After the oil has been changed, the change engine oil message and the oil life indicator must be reset. To reset the message and indicator, use one of the following procedures: base audio system press the clr button located to the right of the dic display to acknowledge the change engine oil message...

  • Page 332: Engine Air Cleaner/filter

    What to do with used oil used engine oil contains certain elements that may be unhealthy for your skin and could even cause cancer. Do not let used oil stay on your skin for very long. Clean your skin and nails with soap and water, or a good hand cleaner. Wash or properly dispose of clothing or rags...

  • Page 333: Caution:

    When to inspect the engine air cleaner/filter inspect the air cleaner/filter at every oil change and replace it at the first oil change after 25,000 miles (40 000 km) how to inspect the engine air cleaner/filter to inspect the air cleaner/filter remove the filter from the vehicle and lightly shake t...

  • Page 334

    Automatic transmission fluid it is not necessary to check the transmission fluid level. A transmission fluid leak is the only reason for fluid loss. If a leak occurs, take your vehicle to the dealership service department and have it repaired as soon as possible. You may also have your fluid level c...

  • Page 335: Engine Coolant

    Navigation system to reset the transmission fluid life indicator, use the following steps: 1. Turn the vehicle on with the ignition in run. 2. Turn the navigation system on by pressing the pwr/vol knob. 3. Press and hold the vehicle information button in the upper right corner of the screen for thre...

  • Page 336: Caution:

    What to use use a mixture of one-half clean, drinkable water and one-half dex-cool ® coolant which won’t damage aluminum parts. If you use this coolant mixture, you don’t need to add anything else. { caution: adding only plain water to your cooling system can be dangerous. Plain water, or some other...

  • Page 337: Caution:

    { caution: turning the surge tank pressure cap when the engine and radiator are hot can allow steam and scalding liquids to blow out and burn you badly. Never turn the surge tank pressure cap — even a little — when the engine and radiator are hot. The vehicle must be on a level surface. When your en...

  • Page 338: Operation Mode

    Overheated engine protection operation mode this emergnecy operating mode allows your vehicle to be driven to a safe place in an emergency situation. Should an overheated engine condition exist, an overheat protection mode which alternates firing groups of cylinders helps prevent engine damage. In t...

  • Page 339

    Caution: (continued) wait until there is no sign of steam or coolant before you open the hood. If you keep driving when your engine is overheated, the liquids in it can catch fire. You or others could be badly burned. Stop your engine if it overheats, and get out of the vehicle until the engine is c...

  • Page 340: Cooling System

    Cooling system when you decide it’s safe to lift the hood, here’s what you’ll see: a. Electric engine cooling fan(s) b. Coolant surge tank and pressure cap { caution: an electric engine cooling fan under the hood can start up even when the engine is not running and can injure you. Keep hands, clothi...

  • Page 341: Caution:

    When the engine is cold, the coolant level should be at or slightly above the full cold/froid line on the side of the coolant surge tank. If it isn’t, you may have a leak at the pressure cap or in the radiator hoses, heater hoses, radiator, water pump or somewhere else in the cooling system. { cauti...

  • Page 342: Caution:

    How to add coolant to the coolant surge tank if you haven’t found a problem yet, check to see if coolant is visible in the surge tank. If coolant is visible but the coolant level isn’t at the full cold/froid line on the side of the coolant surge tank, add a 50/50 mixture of clean, drinkable water an...

  • Page 343: Caution:

    Caution: (continued) your vehicle’s coolant warning system is set for the proper coolant mixture. With plain water or the wrong mixture, your engine could get too hot but you would not get the overheat warning. Your engine could catch fire and you or others could be burned. Use a 50/50 mixture of cl...

  • Page 344

    2. Then keep turning the pressure cap slowly, and remove it. 3. Then fill the coolant surge tank with the proper mixture, to slightly above the full cold/froid line on the side of the coolant surge tank. 5-34.

  • Page 345

    4. With the coolant surge tank pressure cap off, start the engine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine cooling fans. By this time, the coolant level inside the coolant surge tank may be lower. If the level is lower, add more of the proper mi...

  • Page 346: Power Steering Fluid

    Power steering fluid the power steering fluid reservoir is located in the center of the engine compartment, toward the front. See engine compartment overview on page 5-12 for more information on location. When to check power steering fluid it is not necessary to regularly check power steering fluid ...

  • Page 347: Windshield Washer Fluid

    Windshield washer fluid what to use when you need windshield washer fluid, be sure to read the manufacturer’s instructions before use. If you will be operating your vehicle in an area where the temperature may fall below freezing, use a fluid that has sufficient protection against freezing. Adding w...

  • Page 348: Brakes

    Brakes brake fluid your brake master cylinder reservoir is filled with dot-3 brake fluid. See engine compartment overview on page 5-12 for the location of the reservoir. There are only two reasons why the brake fluid level in the reservoir might go down. The first is that the brake fluid goes down t...

  • Page 349: Caution:

    Checking brake fluid you can check the brake fluid without taking off the cap. Just look at the brake fluid reservoir. The fluid level should be above min. If it is not, have your brake system checked to see if there is a leak. After work is done on the brake hydraulic system, make sure the level is...

  • Page 350: Caution:

    Brake wear your vehicle has four-wheel disc brakes. Disc brake pads have built-in wear indicators that make a high-pitched warning sound when the brake pads are worn and new pads are needed. The sound may come and go or be heard all the time your vehicle is moving (except when you are pushing on the...

  • Page 351: Battery

    If you do not, your brakes may no longer work properly. For example, if someone puts in brake linings that are wrong for your vehicle, the balance between your front and rear brakes can change — for the worse. The braking performance you have come to expect can change in many other ways if someone p...

  • Page 352: Jump Starting

    Jump starting if your battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle. Be sure to follow the steps below to do it safely. { caution: batteries can hurt you. They can be dangerous because: • they contain acid that can burn you. • they contain gas...

  • Page 353: Caution:

    4. Open the hoods and locate the batteries. Find the positive (+) and negative ( − ) terminal locations on each vehicle. See engine compartment overview on page 5-12 for more information on location of the battery. { caution: an electric fan can start up even when the engine is not running and can i...

  • Page 354: Caution:

    { caution: fans or other moving engine parts can injure you badly. Keep your hands away from moving parts once the engine is running. 5. Check that the jumper cables don’t have loose or missing insulation. If they do, you could get a shock. The vehicles could also be damaged, too. Before you connect...

  • Page 355

    7. Don’t let the other end touch metal. Connect it to the positive (+) terminal of the good battery. Use a remote positive (+) terminal if the vehicle has one. 8. Now connect the black negative ( − ) cable to the negative terminal of the good battery. Use a remote negative ( − ) terminal if the vehi...

  • Page 356

    9. Connect the other end of the negative ( − ) cable at least 18 inches (45 cm) away from the dead battery, but not near engine parts that move. The electrical connection is just as good there, and the chance of sparks getting back to the battery is much less. 10. Now start the vehicle with the good...

  • Page 357

    A. Heavy, unpainted metal engine part b. Good battery or remote positive (+) terminal c. Dead battery or remote positive (+) terminal to disconnect the jumper cables from both vehicles, do the following: 1. Disconnect the black negative ( − ) cable from the vehicle that had the dead battery. 2. Disc...

  • Page 358: All-Wheel Drive

    All-wheel drive lubricant checks in this section also apply to these vehicles. However, there are two additional systems that need lubrication. Transfer case when to check lubricant it is not necessary to regularly check the transfer case fluid unless you suspect there is a leak or you hear an unusu...

  • Page 359: Rear Axle

    Rear axle when to check lubricant it is not necessary to regularly check the rear axle fluid unless you suspect there is a leak or you hear an unusual noise. A fluid loss could indicate a problem. Have it inspected and repaired. How to check lubricant to get an accurate reading, the vehicle should b...

  • Page 360: Front Axle

    Front axle when to check and change lubricant it is not necessary to regularly check the front axle fluid unless you suspect there is a leak or you hear an unusual noise. A fluid loss could indicate a problem. Have it inspected and repaired. How to check lubricant to get an accurate reading, the veh...

  • Page 361: Bulb Replacement

    Bulb replacement for the proper type of replacement bulb, see replacement bulbs on page 5-55 . For any bulb changing procedure not listed in this section, contact your dealer. High intensity discharge (hid) lighting your vehicle may be equipped with hid headlamps. { caution: the low beam high intens...

  • Page 362

    To remove the headlamp assembly from the vehicle and access the bulbs, follow these steps: 1. Open the hood. See hood release on page 5-11 for more information. 2. Use a tool to remove all of the fasteners along the top surface of the front fascia. 3. Use a tool to remove the one screw and one retai...

  • Page 363

    8. Reinstall the two fasteners on top of the headlamp assembly. 9. Reinstall the screw at the lower inboard side of the headlamp assembly through the hole in the bracket into the headlamp. 10. Reinstall the fasteners along the top surface of the front fascia. To replace the sidemarker and/or parking...

  • Page 364: Sidemarker Lamps

    6. If you are replacing the fog lamp bulb, disconnect the electrical connector from the back of the bulb socket. 7. Turn the bulb socket one-quarter turn counterclockwise to remove it from the assembly. 8. Replace the bulb. See replacement bulbs on page 5-55 for the proper bulb number. 9. Reverse st...

  • Page 365: Replacement Bulbs

    Back-up and license plate lamps to replace the back-up and/or license plate lamps, use the following procedure: 1. Open the liftgate. 2. Remove the liftgate trim panel on the interior of the liftgate by pulling the trim panel snap-in fasteners out of the retainers and also by using a tool to remove ...

  • Page 366: Windshield Wiper Blade

    Windshield wiper blade replacement windshield wiper blades should be inspected at least twice a year for wear or cracking. See owner checks and services on page 6-8 . It’s a good idea to clean or replace the wiper blade assembly on a regular basis or when worn. For proper windshield wiper blade leng...

  • Page 367

    Notice: allowing the wiper blade arm to touch the windshield when no wiper blade is installed could damage the windshield. Any damage that occurs would not be covered by your warranty. Do not allow the wiper blade arm to touch the windshield. 5. Squeeze the tab together and pull the wiper blade asse...

  • Page 368: Tires

    Tires your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever have questions about your tire warranty and where to obtain service, see your gm warranty booklet for details. For additional information refer to the tire manufacturer’s booklet included with your ...

  • Page 369

    Winter tires if you expect to drive on snow or ice covered roads often, you may want to get winter tires for your vehicle. All season tires provide good overall performance on most surfaces but they may not offer the traction you would like or the same level of performance as winter tires on snow or...

  • Page 370

    (a) tire size: the tire size code is a combination of letters and numbers used to define a particular tire’s width, height, aspect ratio, construction type and service description. See the “tire size code” illustration later in this section for more detail. (b) tire performance criteria specificatio...

  • Page 371

    (a) tire size: the tire size code is a combination of letters and numbers used to define a particular tire’s width, height, aspect ratio, construction type and service description. See the “tire size” illustration later in this section for more detail. (b) tire performance criteria specification (tp...

  • Page 372

    (e) tire identification number (tin): the letters and numbers following dot code are the tire identification number (tin). The tin shows the manufacturer and plant code, tire size, and date the tire was manufactured. The tin is molded onto both sides of the tire, although only one side may have the ...

  • Page 373

    (a) temporary use only: the compact spare tire or temporary use tire has a tread life of approximately 3,000 miles (5 000 km) and should not be driven at speeds over 65 mph (105 km/h). The compact spare tire is for emergency use when a regular road tire has lost air and gone flat. See compact spare ...

  • Page 374

    Tire size the following illustrations show the different parts of a tire size code. (a) passenger (p-metric) tire: the united states version of a metric tire sizing system. The letter “p” as the first character in the tire size means a passenger vehicle tire engineered to standards set by the u.S. T...

  • Page 375

    (a) light truck (lt-metric) tire: the united states version of a metric tire sizing system. The letter “lt” as the first two characters in the tire size means a light truck tire engineered to standards set by the u. S. Tire and rim association. (b) tire width: the three-digit number indicates the ti...

  • Page 376

    Tire terminology and definitions air pressure: the amount of air inside the tire pressing outward on each square inch of the tire. Air pressure is expressed in pounds per square inch (psi) or kilopascal (kpa). Accessory weight: this means the combined weight of optional accessories. Some examples of...

  • Page 377

    Load index: an assigned number ranging from 1 to 279 that corresponds to the load carrying capacity of a tire. Maximum inflation pressure: the maximum air pressure to which a cold tire may be inflated. The maximum air pressure is molded onto the sidewall. Maximum load rating: the load rating for a t...

  • Page 378: Inflation - Tire Pressure

    Treadwear indicators: narrow bands, sometimes called “wear bars,” that show across the tread of a tire when only 2/32 inch of tread remains. See when it is time for new tires on page 5-72 . Utqgs: uniform tire quality grading standards, a tire information system that provides consumers with ratings ...

  • Page 379

    When to check check your tires once a month or more. Also, check the tire pressure of the compact spare tire. It should be at 60 psi (420 kpa). How to check use a good quality pocket-type gage to check tire pressure. You can’t tell if your tires are properly inflated simply by looking at them. Radia...

  • Page 380

    Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability. Each tire, including the spare, should be checked monthly when cold a...

  • Page 381

    5. Start with the left (driver’s side) front tire. 6. Remove the valve cap from the valve stem. Activate the tpm sensor by increasing or decreasing the tire’s air pressure for 5 seconds, or until a horn chirp sounds. The horn chirp, which may take up to 30 seconds, confirms that the sensor identific...

  • Page 382

    Tire inspection and rotation the tires on your vehicle are different sizes front to rear. Due to this, your tires should not be rotated. Each tire and wheel should be used only in the position it is in. Check your tires and wheels regularly for unusual wear and damage. Also see, scheduled maintenanc...

  • Page 383: Buying New Tires

    Buying new tires to find out what kind and size of tires you need, look at the certification/tire label or the tire and loading information label. See loading your vehicle on page 4-48 , for examples of the labels and where they can be found on your vehicle. The tires installed on your vehicle when ...

  • Page 384

    Uniform tire quality grading quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: treadwear 200 traction aa temperature a the following information relates to the system developed by the united states national highway traffi...

  • Page 385: Wheel Replacement

    Temperature – a, b, c the temperature grades are a (the highest), b, and c, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the mat...

  • Page 386: Caution:

    Each new wheel should have the same load-carrying capacity, diameter, width, offset and be mounted the same way as the one it replaces. If you need to replace any of your wheels, wheel bolts or wheel nuts, replace them only with new gm original equipment parts. This way, you will be sure to have the...

  • Page 387: Tire Chains

    Tire chains notice: use tire chains only where legal and only when you must. Use only sae class ″ s ″ type chains that are the proper size for your tires. Install them on the rear axle tires and tighten them as tightly as possible with the ends securely fastened. Drive slowly and follow the chain ma...

  • Page 388: Changing A Flat Tire

    Changing a flat tire if a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on your hazard warning flashers. { caution: changing a tire can cause an injury. The vehicle can slip off the jack and roll over you or other people. You and they could be badly inj...

  • Page 389

    Removing the spare tire and tools the equipment you’ll need is located in the rear of the vehicle. 1. If your vehicle has the cargo management system, remove the storage bin to access the jack. If your vehicle has the third row seat, remove the head rest storage tray to access the jack. A. Wing nut ...

  • Page 390

    Removing the spare tire the compact spare tire is located under the vehicle, ahead of the rear bumper. See compact spare tire on page 5-91 for more information about the compact spare. A. Wheel wrench b. Cable c. Retainer d. Compact spare tire 1. Open the storage compartment door of the cargo manage...

  • Page 391: Caution:

    If the spare tire will not lower, the secondary latch may be engaged causing the tire not to lower. Do the following to check the cable: 1. Check under the vehicle to see if the cable is visible. 2. If it’s not visible, see “secondary latch system” following. If it is visible, first try to tighten t...

  • Page 392: Caution:

    To release the spare tire from the secondary latch, do the following: { caution: someone standing too close during the procedure could be injured by the jack. If the spare tire does not slide off the jack completely, make sure no one is behind you or on either side of you as you pull the jack out fr...

  • Page 393

    7. Lower the jack by turning the wheel wrench counterclockwise. Keep lowering the jack until the spare tire is resting on the wheel wrench. 8. Grasp the spare tire with both hands and pull it out from under the vehicle. 9. Reach under the vehicle and remove the wheel wrench and jack. 10. When the sp...

  • Page 394: Caution:

    Removing the flat tire and installing the spare tire 1. Using the flat end of the wheel wrench, pry off the center cap at the notch. Be careful; the edges may be sharp. Don’t try to remove the cover with your bare hands. 2. Loosen the wheel nuts – but do not remove them – using the wheel wrench. (tu...

  • Page 395

    4. Attach the wheel wrench to the jack. 5. Turn the wheel wrench clockwise to raise the jack lift head until the jack just fits under the vehicle. 6. Raise the jack by turning the wheel wrench clockwise until the slots in the jack head fit into the metal flange located behind the triangle on the pla...

  • Page 396: Caution:

    10. Remove any rust or dirt from the wheel bolts, mounting surfaces and spare wheel. { caution: rust or dirt on the wheel, or on the parts to which it is fastened, can make the wheel nuts become loose after a time. The wheel could come off and cause an accident. When you change a wheel, remove any r...

  • Page 397: Caution:

    13. Tighten the wheel nuts firmly in a crisscross sequence, as shown. { caution: incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to become loose and even come off. This could lead to an accident. Be sure to use the correct wheel nuts. If you have to replace them, be sure ...

  • Page 398

    Storing the flat tire with third row passengers put back all tools as they were stored in the rear storage compartment and put the compartment cover back on. 1. Use the power third row seat button near the liftgate to tilt the third row seatback forward slightly. 2. Place the flat tire in the tire s...

  • Page 399: Caution:

    Storing the spare tire and tools { caution: storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place. { caution: the underbody-mounted spare tire...

  • Page 400

    4. Attach the wheel wrench to the hoist shaft. 5. Turn the wheel wrench clockwise to lift the spare tire. 6. When the tire is almost in the stored position, turn the tire so that the valve stem is towards the rear of the vehicle. This will help when you check and maintain tire pressure in the spare....

  • Page 401: Compact Spare Tire

    Compact spare tire although the compact spare tire was fully inflated when your vehicle was new, it can lose air after a time. Check the inflation pressure regularly. It should be 60 psi (420 kpa). After installing the compact spare on your vehicle, you should stop as soon as possible and make sure ...

  • Page 402: Appearance Care

    Appearance care remember, cleaning products can be hazardous. Some are toxic. Others can burst into flames if you strike a match or get them on a hot part of the vehicle. Some are dangerous if you breathe their fumes in a closed space. When you use anything from a container to clean your vehicle, be...

  • Page 403

    Here are some cleaning tips: • always read the instructions on the cleaner label. • clean up stains as soon as you can — before they set. • carefully scrape off any excess stain. • use a clean cloth or sponge, and change to a clean area often. A soft brush may be used if stains are stubborn. • if a ...

  • Page 404: Care Of Safety Belts

    Cleaning interior plastic components use on a mild soap and water solution on a soft cloth or sponge. Commercial cleaners may affect the surface finish. Cleaning wood panels use a clean cloth moistened in warm, soapy water (use mild dish washing soap). Dry the wood immediately with a clean cloth. Cl...

  • Page 405: Vehicle

    Cleaning the outside of your vehicle the paint finish on your vehicle provides beauty, depth of color, gloss retention and durability. Washing your vehicle the best way to preserve your vehicle’s finish is to keep it clean by washing it often with lukewarm or cold water. Do not wash your vehicle in ...

  • Page 406

    Foreign materials such as calcium chloride and other salts, ice melting agents, road oil and tar, tree sap, bird droppings, chemicals from industrial chimneys, etc., can damage your vehicle’s finish if they remain on painted surfaces. Wash the vehicle as soon as possible. If necessary, use non-abras...

  • Page 407: Sheet Metal Damage

    Cleaning tires to clean your tires, use a stiff brush with tire cleaner. Notice: using petroleum-based tire dressing products on your vehicle may damage the paint finish and/or tires. When applying a tire dressing, always wipe off any overspray from all painted surfaces on your vehicle. Sheet metal ...

  • Page 408

    Vehicle care/appearance materials see your gm dealer for more information on purchasing the following products. Vehicle care/appearance materials description usage polishing cloth wax-treated interior and exterior polishing cloth. Tar and road oil remover removes tar, road oil and asphalt. Chrome cl...

  • Page 409: Vehicle Identification

    Vehicle identification vehicle identification number (vin) this is the legal identifier for your vehicle. It appears on a plate in the front corner of the instrument panel, on the driver’s side. You can see it if you look through the windshield from outside your vehicle. The vin also appears on the ...

  • Page 410: Electrical System

    Electrical system add-on electrical equipment notice: don’t add anything electrical to your vehicle unless you check with your dealer first. Some electrical equipment can damage your vehicle and the damage wouldn’t be covered by your warranty. Some add-on electrical equipment can keep other componen...

  • Page 411

    Underhood fuse block the underhood fuse block is located in the engine compartment on the passenger’s side of the vehicle. See engine compartment overview on page 5-12 for more information on location. To access the fuses, push in the two tabs located on each side of the fuse block cover. Then lift ...

  • Page 412

    Relays usage horn relay micro horn hi beam relay micro high-beam headlamps drl relay micro-opt daytime running lamps lo beam relay/hid mini-opt low-beam hid headlamps (option) hdlp wash relay mini-opt headlamp washer motor (option) cigar relay mini cigarette lighter blower relay mini front blower fo...

  • Page 413

    Fuses usage rt park passenger’s side taillamp assembly, front sidemarker and front parking lamp assembly horn dual horn assembly lt hi beam driver’s side high-beam headlamp lt low beam driver’s side low-beam headlamp rt low beam passenger’s side low-beam headlamp rt hi beam passenger’s side high-bea...

  • Page 414

    Fuses usage ecm/tcm ecm, tcm, ipc, pass-key ® iii+ module wpr mod windshield wiper module assembly posto2 post o2 sensors comp clutch compressor clutch wpr sw windshield wiper/washer switch fog lamp fog lamps outlet center console accessory power outlet even coils even injection coils i/p outlet ins...

  • Page 415

    Rear underseat fuse block (driver’s side) the driver’s side rear fuse block is located under the rear seat on the driver’s side of the vehicle. The carpet must be lifted up to access the rear fuse block. To access the fuse block, push in the two tabs located at each end of the fuse block cover. Then...

  • Page 416

    Relays usage spare not used rev lamp relay micro isrvm (inside rearview mirror), license plate lamp assembly fuses usage l frt htd seat mod driver’s heated seat module mem/adapt seat driver’s power seat switch, memory seat module theft universal garage door opener, intrusion sensor, diversity antenn...

  • Page 417

    Rear underseat fuse block (passenger’s side) the passenger’s side rear fuse block is located under the rear seat on the passenger’s side of the vehicle. The carpet must be lifted up to access the rear fuse block. To access the fuse block, push in the two tabs located at each end of the fuse block co...

  • Page 418

    Relays usage rear fog lamp rly micro rear fog lamps (export only) fuel pump motor rly micro fuel pump motor fuses usage interior lamp hush panel lamps, puddle lamps, overhead courtesy lamp assembly rt frt dr mod passenger’s door module rim rim (rear integration module), ignition switch, key lock cyl...

  • Page 419

    Capacities and specifications the following approximate capacities are given in english and metric conversions. See recommended fluids and lubricants on page 6-11 for more information. Application capacities english metric air conditioning refrigerant r134a use refrigerant oil, r134a systems front a...

  • Page 420

    Engine specifications engine vin code transmission spark plug gap 3.6l hfv6 (ly7) 7 m82=rear-wheel drive, 5l40-e mx5=all-wheel drive, 5l40-e 0.044 inches (1.1 mm) 4.6l pv8 (lh2) a m22=rear-wheel drive, 5l50-e mv3=all-wheel drive, 5l50-e 0.040 inches (1.0 mm) 5-110

  • Page 421: Section 6

    Maintenance schedule ......................................6-2 introduction ...................................................6-2 maintenance requirements ..............................6-2 your vehicle and the environment ....................6-2 using your maintenance schedule ....................6...

  • Page 422: Maintenance Schedule

    Maintenance schedule introduction important: keep engine oil at the proper level and change as recommended. Have you purchased the gm protection plan? The plan supplements your new vehicle warranties. See your warranty and owner assistance booklet or your dealer for details. Maintenance requirements...

  • Page 423: Caution:

    Using your maintenance schedule we at general motors want to help you keep your vehicle in good working condition. But we do not know exactly how you will drive it. You may drive very short distances only a few times a week. Or you may drive long distances all the time in very hot, dusty weather. Yo...

  • Page 424: Scheduled Maintenance

    If you want to get service information, see service publications ordering information on page 7-12 . Owner checks and services on page 6-8 tells you what should be checked, when to check it and what you can easily do to help keep your vehicle in good condition. The proper replacement parts, fluids a...

  • Page 425

    Service maintenance i maintenance ii change engine oil and filter. Reset oil life system. See engine oil on page 5-16 . An emission control service. • • lubricate chassis components. See footnote #. • • visually check for any leaks or damage. See footnote (g). • • inspect engine air cleaner filter. ...

  • Page 426

    Additional required services the following services should be performed at the first maintenance service ( i or ii ) after the indicated miles (kilometers) shown for each item. Service 25,000 (41 500) 50,000 (83 000) 75,000 (125 000) 100,000 (166 000) 125,000 (207 500) 150,000 (240 000) inspect fuel...

  • Page 427: Maintenance Footnotes

    Maintenance footnotes † the u.S. Environmental protection agency or the california air resources board has determined that the failure to perform this maintenance item will not nullify the emission warranty or limit recall liability prior to the completion of the vehicle’s useful life. We, however, ...

  • Page 428: Owner Checks And Services

    (g) a fluid loss in any vehicle system could indicate a problem. Have the system inspected and repaired and the fluid level checked. Add fluid if needed. (h) change automatic transmission fluid and filter if the vehicle is mainly driven under one or more of these conditions: − in heavy city traffic ...

  • Page 429: At Least Once A Month

    Engine coolant level check check the engine coolant level and add dex-cool ® coolant mixture if necessary. See engine coolant on page 5-25 for further details. Windshield washer fluid level check check the windshield washer fluid level in the windshield washer tank and add the proper fluid if necess...

  • Page 430: Caution:

    Automatic transmission shift lock control system check { caution: when you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before you start, be sure you have enough room around the vehicle. It should be parked on a level surface. 2...

  • Page 431: Recommended Fluids And

    Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the parking brake. • to check the parking brake’s holding ability: with the engine running and transmission in neutral (n), slowly remove foot pressure from the regular brake pedal. Do this unt...

  • Page 432

    Usage fluid/lubricant hydraulic brake system delco supreme 11 brake fluid or equivalent dot-3 brake fluid. Windshield washer solvent gm optikleen ® washer solvent. Power steering system gm power steering fluid (gm part no. U.S. 89021184, in canada 89021186). Automatic transmission dexron ® -iii auto...

  • Page 433

    Normal maintenance replacement parts replacement parts identified below by name, part number, or specification can be obtained from you dealer. Part gm part numbers acdelco ® part numbers engine air cleaner/filter 25728874 a2029c engine oil filter 3.6l hfv6 25177917 pf2129 4.6l v8 89017342 pf61 pass...

  • Page 434: Maintenance Record

    Maintenance record after the scheduled services are performed, record the date, odometer reading, who performed the service and the type of services performed in the boxes provided. See maintenance requirements on page 6-2 in this section. Any additional information from owner checks and services on...

  • Page 435

    Maintenance record (cont’d) date odometer reading serviced by maintenance i or maintenance ii services performed 6-15.

  • Page 436

    Maintenance record (cont’d) date odometer reading serviced by maintenance i or maintenance ii services performed 6-16.

  • Page 437: Section 7

    Customer assistance and information ...............7-2 customer satisfaction procedure ......................7-2 online owner center ......................................7-3 customer assistance for text telephone (tty) users ........................................................7-4 customer assis...

  • Page 438: Customer Assistance And

    Customer assistance and information customer satisfaction procedure your satisfaction and goodwill are important to your dealer and to cadillac. Normally, any concerns with the sales transaction or the operation of your vehicle will be resolved by your dealer’s sales or service departments. Sometime...

  • Page 439: Online Owner Center

    The bbb auto line program is an out of court program administered by the council of better business bureaus to settle automotive disputes regarding vehicle repairs or the interpretation of the new vehicle limited warranty. Although you may be required to resort to this informal dispute resolution pr...

  • Page 440: Telephone (Tty) Users

    Customer assistance for text telephone (tty) users to assist customers who are deaf, hard of hearing, or speech-impaired and who use text telephones (ttys), cadillac has tty equipment available at its customer assistance center. Any tty user can communicate with cadillac by dialing: 1-800-833-cmcc (...

  • Page 441: With Disabilities

    Overseas – customer assistance please contact the local general motors business unit. Mexico, central america and caribbean islands/countries (except puerto rico and u.S. Virgin islands) – customer assistance general motors de mexico, s. De r.L. De c.V. Customer assistance center paseo de la reforma...

  • Page 442: Roadside Service

    Roadside service cadillac’s exceptional roadside service is more than an auto club or towing service. It provides every cadillac owner with the advantage of contacting a cadillac advisor and, where available, a cadillac trained dealer technician who can provide on-site service. Each technician trave...

  • Page 443: Courtesy Transportation

    Roadside service availability wherever you drive in the united states or canada, an advisor is available to assist you over the phone. A dealer technician, if available, can travel to your location within a 30 mile (50 km) radius of a participating cadillac dealership. If beyond this radius, we will...

  • Page 444

    Plan ahead when possible when your vehicle requires warranty service, you should contact your dealer and request an appointment. By scheduling a service appointment and advising your service consultant of your transportation needs, your dealer can help minimize your inconvenience. If your vehicle ca...

  • Page 445

    Courtesy rental vehicle your dealer may arrange to provide you with a courtesy rental vehicle or reimburse you for a rental vehicle you obtained if your vehicle is kept for a warranty repair. Reimbursement will be limited to a maximum of $40 a day and must be supported by receipts. This requires tha...

  • Page 446: Data Records

    Vehicle data collection and event data records your vehicle, like other modern motor vehicles, has a number of sophisticated computer systems that monitor and control several aspects of the vehicle’s performance. Your vehicle uses on-board vehicle computers to monitor emission control components to ...

  • Page 447: Reporting Safety Defects

    In addition, once gm collects or receives data, gm may • use the data for gm research needs, • make it available for research where appropriate confidentiality is to be maintained and need is shown, or • share summary data which is not tied to a specific vehicle with non-gm organizations for researc...

  • Page 448: Canadian Government

    Reporting safety defects to the canadian government if you live in canada, and you believe that your vehicle has a safety defect, you should immediately notify transport canada, in addition to notifying general motors of canada limited. You may write to: transport canada 330 sparks street tower c ot...

  • Page 449

    Service bulletins service bulletins give technical service information needed to knowledgeably service general motors cars and trucks. Each bulletin contains instructions to assist in the diagnosis and service of your vehicle. In canada, information pertaining to product service bulletins can be obt...

  • Page 450: Notes

    ✍ notes 7-14.

  • Page 451

    A accessing the dic main menu (base audio system) ................................... 3-61 accessory power outlets ................................. 3-24 activating program type (pty) stations (rds and xm™) ....................................... 3-103 adding washer fluid ..............................

  • Page 452

    Audio system(s) (cont.) setting the time .......................................... 3-94 theft-deterrent feature ............................... 3-124 understanding radio reception ................... 3-126 xm™ satellite radio antenna system ........... 3-128 automatic transmission fluid ..............

  • Page 453

    Care of (cont.) cargo cover .................................................. 2-47 cargo management system ............................. 2-47 cd messages ............................................... 3-110 cell phone storage area ................................. 2-45 cellular phone usage ..........

  • Page 454

    Cleaning tires ................................................ 5-97 cleaning vinyl ................................................ 5-93 cleaning windshield and wiper blades .............. 5-96 cleaning wood panels .................................... 5-94 climate control system air filter, passeng...

  • Page 455

    Door (cont.) power door locks ......................................... 2-9 programmable automatic door locks ............. 2-10 rear door security locks ............................. 2-10 driver position, safety belt ..................................... 1-14 driver door ajar .........................

  • Page 456

    Engine (cont.) coolant temperature gage ........................... 3-45 coolant temperature warning light ................ 3-44 engine compartment overview ...................... 5-12 exhaust ..................................................... 2-32 oil ...............................................

  • Page 457

    Fuel (cont.) filling a portable fuel container .................... 5-10 filling your tank ........................................... 5-7 fuels in foreign countries .............................. 5-6 gage ......................................................... 3-51 gasoline octane ..................

  • Page 458

    Homelink ® transmitter .................................... 2-40 homelink ® transmitter, programming ................ 2-41 hood checking things under ................................ 5-10 release ..................................................... 5-11 horn ...........................................

  • Page 459

    L lamps exterior ...................................................... 3-18 interior ....................................................... 3-21 lap-shoulder belt ................................... 1-14, 1-23 latch system child restraints ........................................... 1-42 securing ...

  • Page 460

    M magnetic ride control ..................................... 4-10 maintenance schedule additional required services ........................... 6-6 at each fuel fill ........................................... 6-8 at least once a month .................................. 6-9 at least once a year ......

  • Page 461

    O odometer ...................................................... 3-38 off-road recovery .......................................... 4-14 oil engine ....................................................... 5-16 pressure light ............................................. 3-48 oil pressure low – stop e...

  • Page 462

    Power (cont.) windows .................................................... 2-14 power steering ............................................... 4-12 pretensioners, safety belt ................................ 1-27 programmable automatic door locks ................. 2-10 programming the homelink ® tra...

  • Page 463

    Replacing brake system parts .......................... 5-40 replacing restraint system parts after a crash ..................................................... 1-61 reporting safety defects canadian government .................................. 7-12 general motors ....................................

  • Page 464

    Seats (cont.) manual passenger ......................................... 1-2 memory ..................................................... 2-52 power lumbar .............................................. 1-3 power seats ................................................. 1-2 rear seat operation ..........

  • Page 465

    Starting disabled – throttle problem .................. 3-72 starting your engine ....................................... 2-23 status of vehicle systems, dic ........................ 3-53 steering ........................................................ 4-12 steering column ignition lock release ......

  • Page 466

    Tires (cont.) inspection and rotation ................................ 5-72 pressure monitor system .............................. 5-69 uniform tire quality grading ......................... 5-74 wheel alignment and tire balance ................. 5-75 wheel replacement .................................

  • Page 467

    V vehicle control ........................................................ 4-5 damage warnings ........................................... Iv loading ...................................................... 4-48 symbols ......................................................... Iv vehicle data collecti...

  • Page 468

    When you are ready to leave after parking on a hill ..................................................... 4-60 where to put the restraint ............................... 1-38 why safety belts work .................................... 1-10 window lockout ............................................. ...