1. DL manuals
  2. Cadillac
  3. Ventilation Hood
  4. 2005 Escalade
  5. Maintenance Manual

Cadillac 2005 Escalade Maintenance Manual

Other manuals for 2005 Escalade: Personalization Manual

Summary of 2005 Escalade

  • Page 1

    Seats and restraint systems ........................... 1-1 front seats ............................................... 1-3 rear seats ............................................... 1-8 safety belts ............................................. 1-28 child restraints ...................................

  • Page 2: Canadian Owners

    General motors, gm, the gm emblem, cadillac, the cadillac crest & wreath, and the names escalade escalade/esv are registered trademarks of general motors corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without ...

  • Page 3: Caution:

    Safety warnings and symbols there are a number of safety cautions in this book. We use a box and the word caution to tell about things that could hurt you if you were to ignore the warning. { caution: these mean there is something that could hurt you or other people. In the caution area, we tell you...

  • Page 4: Vehicle Damage Warnings

    Vehicle damage warnings also, in this manual you will find these notices: notice: these mean there is something that could damage your vehicle. A notice tells about something that can damage the vehicle. Many times, this damage would not be covered by your vehicle’s warranty, and it could be costly....

  • Page 5

    These are some examples of symbols that may be found on the vehicle: v.

  • Page 6: Notes

    ✍ notes vi.

  • Page 7: Section 1

    Front seats ......................................................1-3 power seats ..................................................1-3 power lumbar ...............................................1-4 heated seats .................................................1-4 heated and cooled seats .............

  • Page 8: Section 1

    Airbag system ...............................................1-72 where are the airbags? ................................1-74 when should an airbag inflate? .....................1-77 what makes an airbag inflate? .......................1-78 how does an airbag restrain? .......................1-78 wh...

  • Page 9: Front Seats

    Front seats power seats the power seat controls are located on the outboard edge of the front seats. Horizontal control: this control adjusts the seat cushion. • raise or lower the front of the seat by raising or lowering the forward edge of the control. Raise or lower the rear of the seat by raisin...

  • Page 10: Power Lumbar

    Power lumbar your vehicle’s seats may be equipped with power lumbar. You can increase or decrease lumbar support in an area of the lower seatback with this control, located on the outboard sides of the front seat(s). To increase support, press and hold the front of the control. To decrease support, ...

  • Page 11: Heated And Cooled Seats

    The low setting warms the seatback and cushion until the seat temperature is near body temperature. The medium and high settings heat the seatback and seat cushion to a slightly higher temperature. You will be able to feel heat in about two minutes. To heat only the seatback, press the vertical butt...

  • Page 12: Reclining Seatbacks

    To operate the heated and cooled seats, do the following: 1. Press the red heat button (a) or the blue cool button (b). 2. Choose one of the following: i (seatback only): this can only be used for the heat feature. Press this button to heat the seatback and cycle through the heat settings of high, m...

  • Page 13: Caution:

    { caution: sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can not do their job when you are reclined like this. The shoulder belt can not do its job. In a crash, you could go into it, receiving neck or other injuries. The lap ...

  • Page 14: Rear Seats

    The front head restraints can also be tilted forward in addition to being slid up or down. To tilt either of the front head restraints do the following: pull the head restraint toward you until you hear a click. Then let go. The head restraint will stay in this position unless you pull it forward mo...

  • Page 15: Caution:

    Be sure to return the seat to the passenger position when finished. Pull forward and push rearward on the seat to make sure it is locked in place. Escalade esv: the passenger’s side of the second row 60/40 or rear bucket seat has an easy entry/exit feature. This makes it easy to get in and out of th...

  • Page 16: Heated Seats

    Heated seats if your vehicle has this feature, the buttons used to control this feature are located on the back of the center console. The engine must be running for the heated seat feature to work. To heat the seat, press the button to cycle through the temperature settings of high and low. Press t...

  • Page 17: 60/40 Split Bench Seat

    To operate the heated and cooled seats, do the following: 1. Press the red heat button (a) or the blue cool button (b). 2. Choose one of the following: i (seatback only): this can only be used for the heat feature. Press this button to heat the seatback and cycle through the heat settings of high, m...

  • Page 18

    Escalade esv: on the passenger side of escalade esv models, the lever at the base of the seat must be pulled up to release the seatback. Pull the seatback forward and fold it down until it is flat. If the seatback cannot fold flat because it interferes with the cushion, try moving the front seat for...

  • Page 19: Caution:

    Returning the seats to an upright position { caution: if the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always press rearward on the seatback to be sure it is locked. { caution: a safety belt that is improperly routed...

  • Page 20: Caution:

    Folding the seatbacks to fold the seatbacks, do the following: 1. Pull up on the release lever labeled 1 located on the rear of the seatback, and push the seatback forward. Unfolding the seatbacks { caution: if the seatback is not locked, it could move forward in a sudden stop or crash. That could c...

  • Page 21: Caution:

    Tilting the 50/50 split bench seat 1. Fold the seatbacks forward using the instructions listed previously. 2. Unlatch the seat from the floor by pulling up on the lever labeled 2 located on the rear of the seat. 3. Lift the rear of the seat up from the floor and push it forward until it locks into p...

  • Page 22

    2. While still holding the lever 3 toward you, grasp the top of the seat and pull it toward you slightly. 3. Let go of lever 3 and pull the seat completely down. 4. Push down on the seat firmly. Try pulling it up to be sure it is locked into place. 5. Pull up on the release lever labeled 1 and then ...

  • Page 23

    3. To unlatch the rear of the seat from the floor, pull up on the release lever labeled 2 at the rear of the seat, and lift the rear of the seat up from the floor. 4. Squeeze the release handle while pulling the seat out. 5. While holding the rear of the seat up, roll the seat out of the vehicle. 1-...

  • Page 24: Caution:

    Replacing the 50/50 split bench seat { caution: if the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always press rearward on the seatback to be sure it is locked. { caution: a seat that is not locked into place properly...

  • Page 25: Bench Seat

    2. Once the latches are engaged, let the seat drop into place. Release the lever labeled 1 and pull the seatback up using the assist strap on the outboard side of the seat to return it to its upright position. 3. Push and pull on the seat to make sure it is locked into place. The seatback cannot be ...

  • Page 26: Caution:

    Unfolding the seatback 1. To return the seatback to an upright position, pull up on the release lever labeled 1 and then pull up on the seatback until it locks into the upright position. 2. Push and pull on the seatback to check that it is locked into place. Tilting the full bench seat { caution: if...

  • Page 27: Caution:

    3. Lift the rear of the seat up from the floor and push it forward. You will not be able to unlatch the seat from the floor unless the seatback is folded down. { caution: if the support rod is not properly engaged, the folded third row seat could come loose in a sudden stop or crash. That could caus...

  • Page 28

    Returning the seat to an upright position to return the seatback to the upright position, do the following: 1. Pull the lever on the support rod bracket until it unlatches from the seat bracket. 2. Place the support rod back into the storage position. 3. Pull the seat toward you and push firmly down...

  • Page 29

    3. To unlatch the rear of the seat from the floor, pull up on the release lever labeled 2 at the rear of the seat and lift the rear of the seat up from the floor. 4. Pull on the release strap located in the lower middle of the seat to unlatch the seat from the floor and pull the seat out. Use one ha...

  • Page 30: Caution:

    Replacing the bench seat { caution: if the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always press rearward on the seatback to be sure it is locked. { caution: a seat that is not locked into place properly can move ar...

  • Page 31: Bucket Seats

    Bucket seats if your vehicle has bucket seats, the seatbacks can be reclined and the seats can be folded to give you more cargo room. Reclining the seatbacks to recline the seatback, do the following: 1. Pull up the lever located under the seat cushion. Escalade lever shown, escalade esv lever simil...

  • Page 32

    2. Pull the seatback release lever upward and pull the seatback up and fold it down until it is flat. Escalade lever shown, escalade esv lever similar. On the escalade esv models, first remove the headrest and store it on the top of the seat cushion as shown next. Pull the headrest out from the seat...

  • Page 33: Caution:

    Once the seatbacks are folded down, on escalade esv models only, the rear seat footwell area will be exposed and will have to be covered by the load floor panel. To create a load floor, do the following: 1. Release the panels from the seatbacks by pushing forward on the latches. 2. Then fold the pan...

  • Page 34: Safety Belts

    Safety belts safety belts: they are for everyone this part of the manual tells you how to use safety belts properly. It also tells you some things you should not do with safety belts. { caution: do not let anyone ride where he or she can not wear a safety belt properly. If you are in a crash and you...

  • Page 35

    A few crashes are mild, and some crashes can be so serious that even buckled up, a person would not survive. But most crashes are in between. In many of them, people who buckle up can survive and sometimes walk away. Without belts they could have been badly hurt or killed. After more than 30 years o...

  • Page 36

    Put someone on it. Get it up to speed. Then stop the vehicle. The rider does not stop. 1-30

  • Page 37

    The person keeps going until stopped by something. In a real vehicle, it could be the windshield... Or the instrument panel... 1-31.

  • Page 38: Safety Belts

    Or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense. Questions and answers about safety belts q: will i be trapped in the vehicle aft...

  • Page 39: Driver Position

    Q: if i am a good driver, and i never drive far from home, why should i wear safety belts? A: you may be an excellent driver, but if you are in an accident — even one that is not your fault — you and your passengers can be hurt. Being a good driver does not protect you from things beyond your contro...

  • Page 40

    4. Push the latch plate into the buckle until it clicks. Pull up on the latch plate to make sure it is secure. If the belt is not long enough, see safety belt extender on page 1-47. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if y...

  • Page 41: Caution:

    Q: what is wrong with this? A: the shoulder belt is too loose. It will not give nearly as much protection this way. { caution: you can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against ...

  • Page 42: Caution:

    Q: what is wrong with this? A: the belt is buckled in the wrong place. { caution: you can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones. This could cause serious i...

  • Page 43: Caution:

    Q: what is wrong with this? A: the belt is over an armrest. { caution: you can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied at the abdomen, not at the pelvic bones, an...

  • Page 44: Caution:

    Q: what is wrong with this? A: the shoulder belt is worn under the arm. It should be worn over the shoulder at all times. { caution: you can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head an...

  • Page 45: Caution:

    Q: what wrong with this? A: the belt is twisted across the body. { caution: you can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to fix it....

  • Page 46

    To unlatch the belt, just push the button on the buckle. The belt should go back out of the way. Before you close the door, be sure the belt is out of the way. If you slam the door on it, you can damage both the belt and your vehicle. Safety belt use during pregnancy safety belts work for everyone, ...

  • Page 47: Center Passenger Position

    Right front passenger position to learn how to wear the right front passenger’s safety belt properly, see driver position on page 1-33. The right front passenger’s safety belt works the same way as the driver’s safety belt — except for one thing. If you ever pull the shoulder portion of the belt out...

  • Page 48: Rear Seat Passengers

    To make the belt shorter, pull its free end as shown until the belt is snug. Buckle, position and release it the same way as the lap part of a lap-shoulder belt. If the belt is not long enough, see safety belt extender on page 1-47. Make sure the release button on the buckle is positioned so you wou...

  • Page 49

    1. Pick up the latch plate and pull the belt across you. Do not let it get twisted. The shoulder belt may lock if you pull the belt across you very quickly. If this happens, let the belt go back slightly to unlock it. Then pull the belt across you more slowly. 2. Push the latch plate into the buckle...

  • Page 50: Caution:

    The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you would be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen. This could cause serious ...

  • Page 51

    To unlatch the belt, just push the button on the buckle. Rear safety belt comfort guides for children and small adults rear shoulder belt comfort guides will provide added safety belt comfort for older children who have outgrown booster seats and for small adults. When installed on a shoulder belt, ...

  • Page 52

    For the third row, remove the guide from its storage clip on the side of the seatback. 2. Place the guide over the belt and insert the two edges of the belt into the slots of the guide. 3. Be sure that the belt is not twisted and it lies flat. The guide must be on top of the belt. Third row seat 1-4...

  • Page 53: Safety Belt Extender

    4. Buckle, position and release the safety belt as described in rear seat passengers on page 1-42. Make sure that the shoulder belt crosses the shoulder. To remove and store the comfort guides, squeeze the belt edges together so that you can take them out of the guides. Safety belt extender if the v...

  • Page 54: Child Restraints

    Child restraints older children older children who have outgrown booster seats should wear the vehicle’s safety belts. If you have the choice, a child should sit in a seat that has a lap-shoulder belt to get the additional restraint a shoulder belt can provide. Q: what is the proper way to wear safe...

  • Page 55: Caution:

    { caution: never do this. Here two children are wearing the same belt. The belt can not properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured. A belt must be used by only one person at a time. Q: what if a child is wearing a lap-shoulder belt, ...

  • Page 56: Caution:

    { caution: never do this. Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. If the child wears the belt in this way, in a crash the child might slide under the belt. The belt’s force would then be applied right on the child’s abdomen. That cou...

  • Page 57: Caution:

    { caution: people should never hold a baby in their arms while riding in a vehicle. A baby does not weigh much — until a crash. During a crash a baby will become so heavy it is not possible to hold it. For example, in a crash at only 25 mph (40 km/h), a 12 lb (5.5 kg) baby will suddenly become a 240...

  • Page 58: Caution:

    { caution: children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Airbags plus lap-shoulder belts offer protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its airbag sy...

  • Page 59: Caution:

    For most basic types of child restraints, there are many different models available. When purchasing a child restraint, be sure it is designed to be used in a motor vehicle. If it is, the restraint will have a label saying that it meets federal motor vehicle safety standards. The restraint manufactu...

  • Page 60: Child Restraint Systems

    Child restraint systems an infant car bed (a), a special bed made for use in a motor vehicle, is an infant restraint system designed to restrain or position a child on a continuous flat surface. Make sure that the infant’s head rests toward the center of the vehicle. A rear-facing infant seat (b) pr...

  • Page 61

    A forward-facing child seat (c-e) provides restraint for the child’s body with the harness and also sometimes with surfaces such as t-shaped or shelf-like shields. A booster seat (f-g) is a child restraint designed to improve the fit of the vehicle’s safety belt system. Some booster seats have a sho...

  • Page 62

    Q: how do child restraints work? A: a child restraint system is any device designed for use in a motor vehicle to restrain, seat, or position children. A built-in child restraint system is a permanent part of the motor vehicle. An add-on child restraint system is a portable one, which is purchased b...

  • Page 63: Caution:

    Where to put the restraint accident statistics show that children are safer if they are restrained in the rear rather than the front seat. General motors recommends that child restraints be secured in a rear seat, including an infant riding in a rear-facing infant seat, a child riding in a forward-f...

  • Page 64: Top Strap

    Top strap some child restraints have a top strap, or “top tether.” it can help restrain the child restraint during a collision. For it to work, a top strap must be properly anchored to the vehicle. Some top strap-equipped child restraints are designed for use with or without the top strap being anch...

  • Page 65: Caution:

    { caution: each top tether bracket is designed to anchor only one child restraint. Attaching more than one child restraint to a single bracket could cause the anchor to come loose or even break during a crash. A child or others could be injured if this happens. To help prevent injury to people and d...

  • Page 66: Top Strap Anchor Location

    Top strap anchor location escalade esv a child restraint with a top strap should only be used in the second or third row. Do not secure a child restraint in the right front passenger’s position or the third row outboard seating positions if a national or local law requires that the top strap be anch...

  • Page 67

    An anchor loop bracket for a top strap is located at the bottom rear of the seat cushion for each seating position in the second row, and for the center seating position in the third row. Escalade a child restraint with a top strap should only be used in the second or third row. Do not secure a chil...

  • Page 68

    An anchor loop bracket for a top strap is located at the bottom rear of the seat cushion for each seating position in the second row and in the outboard passenger—side seating position in the third row. Lower anchorages and top tethers for children (latch system) your vehicle has the latch system. Y...

  • Page 69

    A. Lower anchorage b. Lower anchorage c. Top tether a. Lower anchorage b. Lower anchorage in order to use the latch system in your vehicle, you need a child restraint designed for that system. 1-63.

  • Page 70: Caution:

    To assist you in locating the lower anchors for this child restraint system, each seating position with the latch system has a visible metal anchorage point in the seat where the seatback meets the seat cushion. { caution: if a latch-type child restraint is not attached to its anchorage points, the ...

  • Page 71: Outside Seat Position

    Securing a child restraint in a rear outside seat position if your child restraint is equipped with the latch system, see lower anchorages and top tethers for children (latch system) on page 1-62. See top strap on page 1-58 if the child restraint has one. For the third row, if your vehicle has a ben...

  • Page 72

    4. Pull the rest of the shoulder belt all the way out of the retractor to set the lock. 5. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor. If you are using a forwar...

  • Page 73: Center Rear Seat Position

    Securing a child restraint in a center rear seat position second row the center seat position in the second row has a lap-shoulder belt which works the same way as the safety belt in the rear outside seat positions. For instructions on how to secure a child restraint using a lap-shoulder belt see se...

  • Page 74: Right Front Seat Position

    4. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 5. To tighten the belt, pull its free end while you push down on the child restraint. If you are using a forward-facing child restraint, you may find it helpful...

  • Page 75: Caution:

    { caution: a child in a rear-facing child restraint can be seriously injured or killed if the right front passenger’s airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. Even though the passenger sensing system is designed to turn...

  • Page 76

    4. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 5. Pull the rest of the shoulder belt all the way out of the retractor to set the lock. 1-70

  • Page 77

    6. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor. If you are using a forward-facing child restraint, you may find it helpful to use your knee to push down on the c...

  • Page 78: Airbag System

    Airbag system your vehicle has four airbags — a frontal airbag for the driver, another frontal airbag for the right front passenger, a side impact airbag for the driver, and another side impact airbag for the right front passenger. Frontal airbags are designed to help reduce the risk of injury from ...

  • Page 79: Caution:

    { caution: both frontal and side impact airbags inflate with great force, faster than the blink of an eye. If you are too close to an inflating airbag, as you would be if you were leaning forward, it could seriously injure you. Safety belts help keep you in position for airbag inflation before and d...

  • Page 80: Where Are The Airbags?

    There is an airbag readiness light on the instrument panel cluster, which shows the airbag symbol. The system checks the airbag electrical system for malfunctions. The light tells you if there is an electrical problem. See airbag readiness light on page 3-34 for more information. Where are the airba...

  • Page 81

    The right front passenger’s frontal airbag is in the instrument panel on the passenger’s side. The driver’s side impact airbag is in the side of the driver’s seatback closest to the door. 1-75.

  • Page 82: Caution:

    The right front passenger’s side impact airbag is in the side of the passenger’s seatback closest to the door. { caution: if something is between an occupant and an airbag, the airbag might not inflate properly or it might force the object into that person causing severe injury or even death. The pa...

  • Page 83

    When should an airbag inflate? The driver’s and right front passenger’s frontal airbags are designed to inflate in moderate to severe frontal or near-frontal crashes. But they are designed to inflate only if the impact exceeds a predetermined deployment threshold. Deployment thresholds take into acc...

  • Page 84

    Side impact airbags are designed to inflate in moderate to severe side crashes. A side impact airbag will inflate if the crash severity is above the system’s designed “threshold level.” the threshold level can vary with specific vehicle design. Side impact airbags are not designed to inflate in fron...

  • Page 85: Inflates?

    Airbags should never be regarded as anything more than a supplement to safety belts, and then only in moderate to severe frontal or near-frontal collisions for the driver’s and right front passenger’s frontal airbags, and only in moderate to severe side collisions for vehicles with a driver’s and ri...

  • Page 86: Passenger Sensing System

    In many crashes severe enough to inflate an airbag, windshields are broken by vehicle deformation. Additional windshield breakage may also occur from the right front passenger airbag. • airbags are designed to inflate only once. After an airbag inflates, you will need some new parts for your airbag ...

  • Page 87

    The passenger sensing system will turn off the right front passenger’s frontal airbag under certain conditions. The driver’s airbag and the side airbags are not part of the passenger sensing system. The passenger sensing system works with sensors that are part of the right front passenger’s seat and...

  • Page 88: Caution:

    Your vehicle has a rear seat that will accommodate a rear-facing child restraint. A label on your sun visor says, “never put a rear-facing child seat in the front.” this is because the risk to the rear-facing child is so great, if the airbag deploys. { caution: a child in a rear-facing child restrai...

  • Page 89

    If after reinstalling the child restraint and restarting the vehicle, the on indicator is still lit, check to make sure that the vehicle’s seatback is not pressing the child restraint into the seat cushion. If this happens, slightly recline the vehicle’s seatback and adjust the seat cushion if possi...

  • Page 90: Caution:

    { caution: if the airbag readiness light in the instrument panel cluster ever comes on and stays on, it means that something may be wrong with the airbag system. If this ever happens, have the vehicle serviced promptly, because an adult-size person sitting in the right front passenger’s seat may not...

  • Page 91: Caution:

    Aftermarket equipment, such as seat covers, can affect how well the passenger sensing system operates. You may want to consider not using seat covers or other aftermarket equipment if your vehicle has the passenger sensing system. See adding equipment to your airbag-equipped vehicle on page 1-86 for...

  • Page 92: Adding Equipment To Your

    Adding equipment to your airbag-equipped vehicle q: is there anything i might add to the front or sides of the vehicle that could keep the airbags from working properly? A: yes. If you add things that change your vehicle’s frame, bumper system, front end or side sheet metal or height, they may keep ...

  • Page 93: After A Crash

    Torn or frayed safety belts may not protect you in a crash. They can rip apart under impact forces. If a belt is torn or frayed, get a new one right away. Also look for any opened or broken airbag covers, and have them repaired or replaced. (the airbag system does not need regular maintenance.) repl...

  • Page 94: Notes

    ✍ notes 1-88.

  • Page 95: Section 2

    Keys ...............................................................2-3 remote keyless entry system .........................2-4 remote keyless entry system operation ...........2-5 doors and locks .............................................2-8 door locks .............................................

  • Page 96: Section 2

    Homelink ® transmitter ...................................2-37 programming the homelink ® transmitter .........2-37 storage areas ................................................2-41 glove box ...................................................2-41 cupholder(s) .........................................

  • Page 97: Keys

    Keys { caution: leaving children in a vehicle with the ignition key is dangerous for many reasons. They could operate the power windows or other controls or even make the vehicle move. The children or others could be badly injured or even killed. Do not leave the keys in a vehicle with children. 2-3.

  • Page 98

    Your vehicle has one double-sided key for the ignition and door locks. If you ever lose your keys, your dealer will be able to assist you with obtaining replacements. In an emergency contact cadillac roadside service ® . See roadside service on page 7-6 for more information. If you ever lock your ke...

  • Page 99: Operation

    At times you may notice a decrease in range. This is normal for any remote keyless entry system. If the transmitter does not work or if you have to stand closer to your vehicle for the transmitter to work, try this: • check the distance. You may be too far from your vehicle. You may need to stand cl...

  • Page 100

    Q (lock): press this button once to lock all of the doors. Pressing lock again within three seconds may cause the horn to chirp for lock confirmation. You can choose different feedback options for each press of the lock button. See “lock feedback” and “unlock feedback” under dic vehicle customizatio...

  • Page 101

    To replace the battery in the keyless entry transmitter, do the following: 1. Insert a thin object, such as a coin, in the slot between the covers of the transmitter housing near the key ring hole. Remove the bottom by twisting the coin. 2. Remove and replace the battery with a three-volt cr2032 or ...

  • Page 102: Doors And Locks

    Doors and locks door locks { caution: unlocked doors can be dangerous. • passengers — especially children — can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle will not open it. You increase the chance of being thrown out of the vehicle in a crash if the doo...

  • Page 103: Power Door Locks

    Power door locks the power door lock switches are located on the driver’s and front passenger’s armrests. Q (lock): remove the ignition key and press the lock symbol to lock all of the doors. If the delayed locking feature is on, the doors will not lock until five seconds after the last door is clos...

  • Page 104: Locks

    Programmable automatic door locks your vehicle is equipped with an automatic lock/unlock feature which enables you to program your vehicle’s power door locks. You can program this feature through the driver information center (dic), or by the following method. See dic vehicle customization on page 3...

  • Page 105

    Programmable unlocking feature the following is the list of available programming options: mode 1: driver’s door unlocks when the transmission is shifted into park (p). Mode 2: all doors unlock when the transmission is shifted into park (p). Mode 3: all doors unlock when the key is removed from the ...

  • Page 106: Rear Door Security Locks

    Rear door security locks with this feature, you can lock the rear doors so they can’t be opened from the inside by passengers. This feature is located on the inside edge of the rear doors. To use the locks, do the following: 1. Open one of the rear doors. 2. Move the lever forward to engage the rear...

  • Page 107: Liftgate/liftglass

    Liftgate/liftglass { caution: it can be dangerous to drive with the liftgate or liftglass open because carbon monoxide (co) gas can come into your vehicle. You cannot see or smell co. It can cause unconsciousness and even death. If you must drive with the liftgate open or if electrical wiring or oth...

  • Page 108: Windows

    Windows { caution: leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with ...

  • Page 109: Power Windows

    Power windows the controls for the power windows are located on the armrest on each of the side doors. The switches operate the windows when the ignition is in run, accessory or while retained accessory power (rap) is active. See retained accessory power (rap) on page 2-19. The driver’s door also ha...

  • Page 110: Theft-Deterrent Systems

    Theft-deterrent systems vehicle theft is big business, especially in some cities. Although your vehicle has a number of theft-deterrent features, we know that nothing we put on it can make it impossible to steal. Content theft-deterrent your vehicle is equipped with a content theft-deterrent alarm s...

  • Page 111: Passlock

    If you set off the alarm by accident, unlock any door with the key. You can also turn off the alarm by pressing unlock on the remote keyless entry transmitter. The alarm won’t stop if you try to unlock a door any other way. Testing the alarm the alarm can be tested by following these steps: 1. From ...

  • Page 112: Vehicle

    Starting and operating your vehicle new vehicle break-in notice: your vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: • keep your speed at 55 mph (88 km/h) or less for the first 500 miles (805 km). • do not drive at any one spee...

  • Page 113: Starting Your Engine

    B (accessory): this position lets you use things like the radio and the windshield wipers when the engine is off. Notice: lengthy operation of features such as the radio in the accessory ignition position may drain the battery and prevent your vehicle from starting. Do not operate your vehicle in th...

  • Page 114

    When starting your engine in very cold weather (below 0°f or − 18°c), do this: 1. With your foot off the accelerator pedal, turn the ignition key to start and hold it there up to 15 seconds. When the engine starts, let go of the key. 2. If your engine still will not start, or starts but then stops, ...

  • Page 115: Engine Coolant Heater

    Engine coolant heater your vehicle may be equipped with an engine coolant heater. In very cold weather, 0°f ( − 18°c) or colder, the engine coolant heater can help. You will get easier starting and better fuel economy during engine warm-up. Usually, the coolant heater should be plugged in a minimum ...

  • Page 116: Caution:

    Automatic transmission operation your vehicle is equipped with an automatic transmission and features an electronic shift position indicator located within the instrument panel cluster. There are several different positions for your shift lever. Park (p): this position locks your drive wheels. It is...

  • Page 117: Caution:

    To rock your vehicle back and forth to get out of snow, ice or sand without damaging your transmission, see if you are stuck: in sand, mud, ice or snow on page 4-45. Neutral (n): in this position, your engine does not connect with the wheels. To restart when you are already moving, use neutral (n) o...

  • Page 118: Tow/haul Mode

    If you manually select second (2), the transmission will drive in second gear. You may use this feature for reducing the speed of the rear wheels when you are trying to start your vehicle from a stop on slippery road surfaces. Once the vehicle is moving, shift into drive (d). First (1): this positio...

  • Page 119: All-Wheel Drive

    All-wheel drive with this feature, engine power is sent to all four wheels when extra traction is needed. This is like four-wheel drive, but there is no separate lever or switch to engage or disengage the front axle. It is fully automatic, and adjusts itself as needed for road conditions. Parking br...

  • Page 120: Shifting Into Park (P)

    Shifting into park (p) { caution: it can be dangerous to get out of your vehicle if the shift lever is not fully in park (p) with the parking brake firmly set. Your vehicle can roll. If you have left the engine running, the vehicle can move suddenly. You or others could be injured. To be sure your v...

  • Page 121: Shifting Out Of Park (P)

    Torque lock if you are parking on a hill and you do not shift your vehicle into park (p) properly, the weight of the vehicle may put too much force on the parking pawl in the transmission. You may find it difficult to pull the shift lever out of park (p). This is called torque lock. To prevent torqu...

  • Page 122: Caution:

    Parking over things that burn { caution: things that can burn could touch hot exhaust parts under your vehicle and ignite. Do not park over papers, leaves, dry grass or other things that can burn. Engine exhaust { caution: engine exhaust can kill. It contains the gas carbon monoxide (co), which you ...

  • Page 123: Are Parked

    Running your engine while you are parked it is better not to park with the engine running. But if you ever have to, here are some things to know. { caution: idling the engine with the climate control system off could allow dangerous exhaust into your vehicle. See the earlier caution under engine exh...

  • Page 124: Mirrors

    Mirrors automatic dimming rearview mirror with onstar ® , compass and temperature display your vehicle may have this feature. When on, the automatic dimming mirror dims to the proper level to minimize glare from lights behind you after dark. The mirror has a dual display in the upper right corner of...

  • Page 125

    Automatic dimming mirror operation the automatic dimming mirror function is turned on automatically each time the ignition is started. To operate the automatic dimming mirror, do the following: 1. Make sure the green indicator light, located to the left of the on/off button, is lit. If it is not, pr...

  • Page 126

    3. Keep pressing the on/off button until the desired zone number appears in the display. Release the button. After approximately four seconds of inactivity, the new zone number will be locked in and the compass/temperature display will return. 4. Calibrate the compass as described next. Compass cali...

  • Page 127: Outside Power Mirrors

    Outside power mirrors the controls are located on the driver’s door armrest. Move the upper selector switch to the left or right to choose the mirror to be adjusted, then press the dots, located below the selector switch on the four-way control pad, to adjust the direction of each mirror. The mirror...

  • Page 128: Outside Convex Mirror

    Outside convex mirror { caution: a convex mirror can make things (like other vehicles) look farther away than they really are. If you cut too sharply into the right lane, you could hit a vehicle on your right. Check your inside mirror or glance over your shoulder before changing lanes. The passenger...

  • Page 129: With Curb View Assist

    Outside automatic dimming mirror with curb view assist your vehicle may have this feature. The driver’s outside mirror will adjust for the glare of the headlamps behind you. See automatic dimming rearview mirror with onstar ® , compass and temperature display on page 2-30. Your vehicle’s mirrors wil...

  • Page 130

    Directions and connections plan • automatic notification of airbag deployment • emergency services • roadside assistance • stolen vehicle tracking • accidentassist • remote door unlock/vehicle alert • remote diagnostics • online concierge • driving directions • rideassist • information and convenien...

  • Page 131: Homelink

    Homelink ® transmitter homelink ® a combined universal transmitter and receiver, provides a way to replace up to three hand-held transmitters used to activate devices such as gate operators, garage door openers, entry door locks, security systems and home lighting. Additional homelink ® information ...

  • Page 132

    Keep the original transmitter for use in other vehicles as well as for future homelink ® programming. It is also recommended that upon the sale of the vehicle, the programmed homelink ® buttons should be erased for security purposes. Refer to “erasing homelink ® buttons” or, for assistance, contact ...

  • Page 133

    If the indicator light blinks rapidly for two seconds and then turns to a constant light, continue with steps 6 through 8 following to complete the programming of a rolling-code equipped device (most commonly, a garage door opener). 6. Locate in the garage, the garage door opener receiver (motor-hea...

  • Page 134

    Using homelink ® press and hold the appropriate homelink ® button for at least half of a second. The indicator light will come on while the signal is being transmitted. Erasing homelink ® buttons to erase programming from the three buttons do the following: 1. Press and hold down the two outside but...

  • Page 135: Storage Areas

    Storage areas glove box open the glove box by pulling the bottom of the handle upward. Cupholder(s) your vehicle is equipped with cupholders for the front and rear passengers. The cupholders are located in the center console for the front passengers and on the rear of the center console for the rear...

  • Page 136: Luggage Carrier

    Center console storage area your vehicle has a console compartment between the bucket seats. To open it, press the button on the side of the console and swing the console lid open. The console may be equipped with an accessory power outlet inside. See accessory power outlets on page 3-21. The rear o...

  • Page 137: Rear Seat Armrest

    • if you need to carry long items, move the crossrails as far apart as they will go. Tie the load to the crossrails and the siderails or siderail supports. Also tie the load to the bumpers. Do not tie the load so tightly that the crossrails or siderails are damaged. • after moving a crossrail, be su...

  • Page 138: Cargo Cover

    Cargo cover { caution: an improperly stored cargo cover could be thrown about the vehicle during a collision or sudden maneuver. You or others could be injured. If you remove the cover, always store it in the proper storage location. When you put it back, always be sure that it is securely reattache...

  • Page 139: Sunroof

    3. Move the other end of the cover forward and hold it next to the passenger’s side trim panel slot. 4. Push the button on top of the passenger’s side endcap. This will allow the cover to extend into the trim slot. 5. Lightly pull on the cover holder to make sure it is secure. On some models there a...

  • Page 140: Vehicle Personalization

    The sunroof is also equipped with a sunshade which you can pull forward to block sun rays. If a hand, arm, or other object is blocking the sunroof glass panel as it is closing, the glass panel will stop at the obstruction. After the obstruction is removed, the glass panel can be closed or opened. Us...

  • Page 141

    2. Press and hold the 1 or 2 button of the memory control for three seconds. A double chime will sound to let you know that the position has been stored. To repeat the procedure for a second driver, follow the preceding steps, but press the other numbered memory control button. Each time button 1 or...

  • Page 142: Notes

    ✍ notes 2-48.

  • Page 143: Section 3

    Instrument panel overview ...............................3-4 hazard warning flashers ................................3-6 other warning devices ...................................3-6 horn .............................................................3-6 tilt wheel ........................................

  • Page 144: Section 3

    Engine coolant temperature gage ..................3-40 transmission temperature gage .....................3-41 malfunction indicator lamp .............................3-42 oil pressure gage ........................................3-45 security light ...............................................3-4...

  • Page 145: Notes

    ✍ notes 3-3.

  • Page 146: Instrument Panel Overview

    Instrument panel overview 3-4.

  • Page 147

    The main components of your instrument panel are the following: a. Air outlets. See outlet adjustment on page 3-28. B. Exterior lamps control. See exterior lamps on page 3-14. C. Turn signal/multifunction lever. See turn signal/multifunction lever on page 3-7. D. Onstar ® and radio steering wheel bu...

  • Page 148: Hazard Warning Flashers

    Hazard warning flashers your hazard warning flashers let you warn others. They also let police know you have a problem. Your front and rear turn signal lamps will flash on and off. The hazard warning flasher button is located on top of the steering column. Your hazard warning flashers work no matter...

  • Page 149: Tilt Wheel

    Tilt wheel the tilt steering wheel allows you to adjust the steering wheel before you drive. You can raise it to the highest level to give your legs more room when you enter and exit the vehicle. The tilt lever is located on the driver’s side of the steering column under the turn signal lever. To ti...

  • Page 150

    • l windshield washer. See windshield washer on page 3-10. • i cruise control. Cruise control on page 3-11. For information on the exterior lamps, see exterior lamps on page 3-14 later in this section. Turn and lane-change signals the turn signal has two upward (for right) and two downward (for left...

  • Page 151: Flash-to-Pass

    When the high beams are on, this indicator light on the instrument panel cluster will also be on. Flash-to-pass this feature lets you use your high-beam headlamps to signal a driver in front of you that you want to pass. It works even if your headlamps are in the automatic position. To use it, pull ...

  • Page 152: Windshield Washer

    Windshield washer l (washer fluid): there is a paddle marked with the windshield washer symbol at the top of the multifunction lever. To spray washer fluid on the windshield, push the paddle. The wipers will clear the window and then either stop or return to your preset speed. { caution: in freezing...

  • Page 153: Cruise Control

    Cruise control 9 (off): this position turns the system off. R (on): this position activates the system. + (resume/accelerate): push the lever to this symbol to make the vehicle accelerate or resume to a previously set speed. T (set): press this button to set the speed. With cruise control, you can m...

  • Page 154: Caution:

    Setting cruise control { caution: if you leave your cruise control on when you are not using cruise, you might hit a button and go into cruise when you do not want to. You could be startled and even lose control. Keep the cruise control switch off until you want to use cruise control. 1. Move the cr...

  • Page 155

    • move the cruise switch from on to resume/accelerate. Hold it there until you get up to the speed you want, and then release the switch. To increase your speed in very small amounts, move the switch briefly to resume/accelerate. Each time you do this, your vehicle will go about 1 mph (1.6 km/h) fas...

  • Page 156: Exterior Lamps

    Exterior lamps the control on the driver’s side of your instrument panel operates the exterior lamps. The exterior lamp control has four positions: 9 (off): turn the knob to this position and release it to turn off all exterior lamps including the drl. To turn any lamps back on when in the off mode,...

  • Page 157: Headlamps On Reminder

    Headlamps on reminder if a door is open, a reminder chime will sound when your headlamps or parking lamps are manually turned on and your key is out of the ignition. To turn off the chime, turn the headlamp switch to off or auto and then back on. In the auto mode, the headlamps turn off once the ign...

  • Page 158: Fog Lamps

    Your vehicle has a light sensor located on the top of the instrument panel. Be sure it is not covered, or the system will be on whenever the ignition is on. The system may also turn on your headlamps when driving through a parking garage, heavy overcast weather or a tunnel. This is normal. There is ...

  • Page 159: Dome Lamps

    The fog lamps will go off whenever your high-beam headlamps come on. When the high beams go off, the fog lamps will come on again. The fog lamps will be cancelled after the ignition is turned off. If you still want to use the fog lamps after you restart the vehicle, you will need to press the fog la...

  • Page 160: Reading Lamps

    Reading lamps if your vehicle has reading lamps, press the button located next to the lamp to turn it on or off. The lamps can be adjusted to point in the direction you want. Your vehicle may also have reading lamps in other locations. To turn on or off, press the button located next to the lamp. Th...

  • Page 161: Caution:

    The urpa display is located inside the vehicle, near the rear window. It has three color-coded lights used to provide distance and system information to the driver. Urpa can be turned off by pressing the rear park aid disable button located near the climate control system and radio. You will not see...

  • Page 162

    How the system works unless disabled, the urpa will turn on automatically when the shift lever is moved into reverse (r). When the system turns on, the three lights on the display will illuminate for one and a half seconds to let you know that the system is working. If your vehicle is moving in reve...

  • Page 163: Accessory Power Outlets

    Accessory power outlets with accessory power outlets you can plug in auxiliary electrical equipment such as a cellular telephone or cb radio. Your vehicle is equipped with many accessory power outlets. One outlet is located in the center console. Press the button on the side of the console door to a...

  • Page 164: Analog Clock

    Analog clock to adjust the clock, do the following: 1. Locate the adjustment button to the lower left corner of the clock. 2. Push and hold the adjustment button to advance the clock hands. Release the button before you get to the desired time. 3. Push and release the button to increase the time by ...

  • Page 165

    Driver’s side temperature knob the driver’s side knob is used to adjust the temperature of the air coming through the system on the driver’s side. The temperature can be adjusted even if the system is turned off. This is possible since outside air will always flow through the system as the vehicle i...

  • Page 166

    If the driver’s and passenger’s temperature settings are not the same, the opposite side temperature setting will be displayed for an additional five seconds. To make the passenger’s temperature the same as the driver’s press and hold the auto button for about four seconds. When auto is selected, th...

  • Page 167

    Manual operation you may manually adjust the air delivery mode or fan speed. W9x (fan): the switch with the fan symbol allows you to manually adjust the fan speed. Press the up arrow to increase fan speed and the down arrow to decrease fan speed. Pressing this button when the system is off will turn...

  • Page 168

    If you select recirculation while in defrost, defog or floor, the light in the button will flash and then go out to let you know that this is not allowed. This is normal and helps to prevent fogging. When the weather is cool or damp, operating the system in recirculation for extended periods of time...

  • Page 169

    On cool, but sunny days while using manual operation of the automatic system, use bi-level to deliver warm air to the floor and cooler air to the instrument panel outlets. To warm or cool the air delivered, turn the temperature knob to the desired setting. In auto mode the system will cool and dehum...

  • Page 170: Outlet Adjustment

    Rear window defogger if your vehicle has this feature, the lines you see on the rear window warm the glass. The rear window defogger uses a warming grid to remove fog from the rear window. (rear): press this button to turn the rear window defogger on or off. An indicator light in the button will com...

  • Page 171

    Rear climate control system with this system the front or rear passengers can control the air temperature, air flow and fan speed for the rear seat passengers. The front overhead console and the rear controls are used to adjust the climate. Driver overhead control aux: turn the knob, located on the ...

  • Page 172

    Rear passenger console control to use the rear climate control from the rear passenger position, use the rear passenger console control. The driver overhead control fan knob must be set to the aux position. The rear seat controls have the following settings: o (on/off): press this button to turn the...

  • Page 173: Indicators

    Warning lights, gages, and indicators this part describes the warning lights and gages on your vehicle. The pictures will help you locate them. Warning lights and gages can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement. Paying attention t...

  • Page 174: Instrument Panel Cluster

    Instrument panel cluster your instrument panel cluster is designed to let you know at a glance how your vehicle is running. You’ll know how fast you’re going, about how much fuel you have and many other things you’ll need to know to drive safely and economically. United states version shown, canada ...

  • Page 175: Speedometer And Odometer

    Speedometer and odometer your speedometer lets you see your speed in both miles per hour (mph) and kilometers per hour (km/h). Your vehicle’s odometer works together with the driver information center. You can set a trip a and trip a odometer. See “trip information” under dic operation and displays ...

  • Page 176: Airbag Readiness Light

    Airbag readiness light there is an airbag readiness light on the instrument panel, which shows the airbag symbol. The system checks the airbag’s electrical system for malfunctions. The light tells you if there is an electrical problem. The system check includes the airbag sensors, the airbag modules...

  • Page 177: Caution:

    Passenger airbag status indicator if your vehicle has the passenger sensing system your rearview mirror will have a passenger airbag status indicator. When the ignition key is turned to run or start, the passenger airbag status indicator will light on and off, or the symbol for on and off, for sever...

  • Page 178: Caution:

    If the word off or the off symbol is lit on the airbag status indicator, it means that the passenger sensing system has turned off the right front passenger’s frontal airbag. See passenger sensing system on page 1-80 for more on this, including important safety information. If, after several seconds...

  • Page 179: Voltmeter Gage

    Voltmeter gage when your engine is not running, but the ignition is in run, this gage shows your battery’s state of charge in dc volts. When the engine is running, the gage shows the condition of the charging system. The gage may transition from a higher to lower or a lower to higher reading, this i...

  • Page 180: Caution:

    This light should come on briefly when you turn the ignition key to run. If it doesn’t come on then, have it fixed so it will be ready to warn you if there’s a problem. If the light comes on while you are driving, pull off the road and stop carefully. You may notice that the pedal is harder to push ...

  • Page 181: Light

    Anti-lock brake system warning light with the anti-lock brake system, this light will come on when you start your engine and may stay on for several seconds. That’s normal. If the light doesn’t come on then, have it fixed so it will be ready to warn you if there is a problem. If the light stays on, ...

  • Page 182: Traction Off Light

    Traction off light if you have the stabilitrak ® system, this light should come on briefly when you turn the ignition to run. If the light doesn’t come on then, the system may require service; have it fixed so it will be there to warn you if the system is turned off. For more information on the trac...

  • Page 183

    Transmission temperature gage your vehicle is equipped with a transmission temperature gage. When your ignition is on, the gage shows the temperature of the transmission fluid. The normal operating range is from 180°f (82°c) to about 200°f (93°c). At approximately 265°f (130°c), the dic will display...

  • Page 184: Malfunction Indicator Lamp

    Notice: if you drive your vehicle with the transmission temperature gage above normal operating range, you can damage the transmission. This could lead to costly repairs that would not be covered by your warranty. Do not drive your vehicle while the transmission temperature gage reading is above nor...

  • Page 185

    Notice: if you keep driving your vehicle with this light on, after awhile, your emission controls may not work as well, your fuel economy may not be as good, and your engine may not run as smoothly. This could lead to costly repairs that may not be covered by your warranty. Notice: modifications mad...

  • Page 186

    If the light is on steady you may be able to correct the emission system malfunction by considering the following: did you recently put fuel into your vehicle? If so, reinstall the fuel cap, making sure to fully install the cap. See filling your tank on page 5-8. The diagnostic system can determine ...

  • Page 187: Oil Pressure Gage

    Emissions inspection and maintenance programs some state/provincial and local governments have or may begin programs to inspect the emission control equipment on your vehicle. Failure to pass this inspection could prevent you from getting a vehicle registration. Here are some things you need to know...

  • Page 188: Caution:

    A reading in the low pressure zone may be caused by a dangerously low oil level or some other problem causing low oil pressure. Check your oil as soon as possible. See dic warnings and messages on page 3-53. { caution: do not keep driving if the oil pressure is low. If you do, your engine can become...

  • Page 189: Cruise Control Light

    Cruise control light this light comes on whenever you set your cruise control. The light will go out when the cruise control is turned off. See cruise control on page 3-11 for more information. Highbeam on light this light will come on when the high-beam headlamps are in use. See headlamp high/low-b...

  • Page 190: Fuel Gage

    Fuel gage when the ignition is on, the fuel gage tells you about how much fuel you have left in your tank. The gage will first indicate empty before you are out of fuel, and you should get more fuel as soon as possible. Here are some situations you may experience with your fuel gage. None of these i...

  • Page 191

    Driver information center (dic) the driver information center (dic) display is located on the instrument panel cluster, below the speedometer. The dic buttons, if equipped, are located on the steering wheel. The dic can display information such as the trip odometer, fuel economy, customization featu...

  • Page 192

    Dic operation and displays the driver information center (dic) comes on when the ignition is on. After a short delay, the dic will display the information that was last displayed before the engine was turned off. The dic has different modes which can be accessed by pressing the four dic buttons loca...

  • Page 193

    • lr tire shows the tire pressure for the left rear tire. • rr tire shows the tire pressure for the right rear tire. Timer: the dic can be used as a timer. Press the select button while timer is displayed to start the timer. The display will show the amount of time that has passed since the timer wa...

  • Page 194

    Average fuel economy: press the fuel information button until avg econ appears on the display. This mode shows how many miles per gallon (mpg) or liters per 100 kilometers (l/100 km) your vehicle is getting based on current and past driving conditions. Press and hold the select button for one second...

  • Page 195: Dic Warnings And Messages

    Dic warnings and messages warning messages are displayed on the driver information center (dic) to notify the driver that the status of the vehicle has changed and that some action may be needed by the driver to correct the condition. If there is more than one message that needs to be displayed they...

  • Page 196

    This reminder will be repeated if the ignition is on, the vehicle is in motion, the driver is buckled and the passenger is still unbuckled and the passenger airbag is enabled. If the passenger’s seat belt is already buckled, this message and chime will not come on. Pressing any of the four dic butto...

  • Page 197

    Check oil level if the oil level in the vehicle is low, this message will appear on the dic. Check the oil level and correct it as necessary. You may need to let the vehicle cool or warm up and cycle the ignition to be sure this message will clear. Once the problem is corrected, pressing any of the ...

  • Page 198

    Engine coolant hot if the cooling system temperature gets hot, this message will appear in the dic. Stop the vehicle and let the engine idle in park (p) to allow the coolant to reach a safe temperature. This message will clear when the coolant temperature drops to a safe operating temperature. Press...

  • Page 199

    Left rear door ajar if the driver’s side rear door is not fully closed and the vehicle is in a drive gear, this message will appear on the display and you will hear a chime. Stop and turn off the vehicle, check the door for obstacles and close the door again. Check to see if the message still appear...

  • Page 200

    Passenger door ajar if the passenger’s door is not fully closed and the vehicle is in a drive gear, this message will appear on the display and you will hear a chime. Stop and turn off the vehicle, check the door for obstacles and close the door again. Check to see if the message still appears on th...

  • Page 201

    Service 4wd if you have all-wheel-drive and a problem occurs with the all-wheel-drive system, this message will appear on the dic. If this message appears, stop as soon as possible and turn off the vehicle. Restart the vehicle and check for the message on the dic display. If the message is still dis...

  • Page 202

    Service ride control if a problem occurs with the suspension system, this message will appear on the dic. If this message appears, stop and turn off the vehicle. Restart the vehicle and check for the message on the dic display. If the message is still displayed or appears again when you begin drivin...

  • Page 203

    Stability sys disabled the stability sys disabled message will turn on when you press the stabilitrak ® button, or when the stability control has been automatically disabled. There are four conditions that can cause this message to appear. • one condition is overheating, which could occur if stabili...

  • Page 204

    Traction sys limited if the brake traction control system activates constantly or if the brakes have heated up due to high-speed braking, brake traction control will be disabled and the traction sys limited message will be displayed. For more information on the stabilitrak ® system and traction cont...

  • Page 205: Dic Vehicle Customization

    The following situations can cause the transmission to operate at higher temperatures: • towing a trailer • hot outside air temperatures • hauling a large or heavy load • over-loading • low transmission fluid level • high transmission fluid level • restricted air flow to the radiator a temporary sol...

  • Page 206

    Lock doors: with speed: the doors will lock when the vehicle speed is above 8 mph (13 km/h) for three seconds. Choose one of the available options and press the customization button while it is displayed on the dic to select it and move on to the next feature. For more information on automatic door ...

  • Page 207

    Door lock delay: on: the doors will not lock until five seconds after the last door or the liftgate is closed. You will hear three chimes to signal that the delayed locking feature is in use. You can temporarily override delayed locking by pressing the lock button on the door or the remote keyless e...

  • Page 208

    Unlock feedback: horn: the horn will chirp the second time you press the button with the unlock symbol on the remote keyless entry transmitter. Unlock feedback: both: the parking lamps will flash each time you press the button with the unlock symbol on the remote keyless entry transmitter and the ho...

  • Page 209

    Perimeter lights: off: the perimeter lights will not come on when you unlock the vehicle with the remote keyless entry transmitter. Choose one of the available options and press the customization button while it is displayed on the dic to select it and move on to the next feature. Easy exit seat pre...

  • Page 210

    Alarm warning press the customization button until alarm warning appears in the display. To select your preference for alarm warning, press the select button while alarm warning is displayed on the dic. Pressing the select button will scroll through the following choices: alarm warning: both (defaul...

  • Page 211: Audio System(S)

    Display units press the customization button until display units appears in the display. To select english or metric, press the select button while display units is displayed on the dic. Pressing the select button will scroll through the following choices: • display units: english • display units: m...

  • Page 212: Setting The Time

    Setting the time press and hold the hr button until the correct hour appears on the display. Press and hold the mn button until the correct minute appears on the display. The time can be set with the ignition on or off. To synchronize the time with an fm station broadcasting radio data system (rds) ...

  • Page 213

    This system relies upon receiving specific information from these stations and will only work when the information is available. In rare cases, a radio station may broadcast incorrect information that will cause the radio features to work improperly. If this happens, contact the radio station. While...

  • Page 214

    Auto vol (automatic volume): your vehicle has the bose ® audiopilot ® noise compensation technology. When turned on, audiopilot ® continuously adjusts the audio system to compensate for background noise, so that your music always sounds the same at the set volume level. This feature is most effectiv...

  • Page 215

    To scan preset stations, press and hold either the scan or the type arrows for more than four seconds. Pscn will appear on the display and you will hear a double beep. The radio will go to a preset station, play for a few seconds, then go on to the next preset station. Press either the scan or the t...

  • Page 216

    Auto eq (automatic equalization): press this button to enhance the audio performance for different passengers in the vehicle. The setting last chosen will appear on the display when you first press auto eq. Each time you press this button, another setting will appear on the display and auto eq will ...

  • Page 217

    Finding a program type (pty) station (rds and xm™) to select and find a desired pty perform the following: 1. Press the type button to activate program type select mode. Type and a pty will appear on the display. 2. Turn the type knob or press and release the type button to select a pty. 3. Once the...

  • Page 218

    Setting preset ptys (rds only) these buttons have factory pty presets. Up to 12 ptys (six fm1 and six fm2), can be programmed on the six numbered pushbuttons, by performing the following steps: 1. Press band to select fm1 or fm2. 2. Press the type button to activate program type select mode. Type an...

  • Page 219

    Xm™ radio messages radio display message condition action required xl (explicit language channels) xl on the radio display, after the channel name, indicates content with explicit language. These channels, or any others, can be blocked at a customer’s request, by calling 1-800-852-xmxm (9696). Updat...

  • Page 220

    Xm™ radio messages (cont’d) radio display message condition action required no info category name not available no category information is available at this time on this channel. The system is working properly. No info no text/informational message available no text or informational messages are ava...

  • Page 221

    Playing a cassette tape the tape player is built to work best with tapes that are up to 30 to 45 minutes long on each side. Tapes longer than that are so thin they may not work well in this player. The longer side with the tape visible should face to the right. If you hear nothing or hear a garbled ...

  • Page 222

    2 next: the tape must have at least three seconds of silence between each selection for next to work. Press this pushbutton to go to the next selection on the tape. Pressing this pushbutton multiple times, in next mode, will increase the number of selections to be searched forward. Seek and a positi...

  • Page 223

    Cassette tape messages chk tape (check tape): if this message appears on the display, the tape will not play due to one of the following errors: • the tape is tight and the player cannot turn the tape hubs. Remove the tape. Hold the tape with the open end down and try to turn the right hub countercl...

  • Page 224

    Playing a cd insert a cd partway into the slot, label side up. The player will pull it in and the cd should begin playing. If you want to insert a cd with the ignition off, first press the eject button or the info knob. If the ignition or radio is turned off with the cd in the player, it will stay i...

  • Page 225

    6 rdm (random): press this pushbutton to hear the tracks in random, rather than sequential, order. Rdm on will appear on the display. Rdm t and the track number will appear on the display when each track starts to play. Press this pushbutton again to turn off random play. Rdm off will appear on the ...

  • Page 226

    If any error occurs repeatedly or if an error cannot be corrected, contact your gm dealer. If the radio displays an error message, write it down and provide it to your gm dealer when reporting the problem. Listening to a dvd if your vehicle has the rear seat entertainment (rse) system and a dvd is p...

  • Page 227

    Headphones the rse system includes two sets of wireless headphones. Each set of headphones has an on/off control. An indicator light will illuminate on the headphones when they are on. If the light does not illuminate, the batteries may need to be replaced. See “battery replacement” later in this se...

  • Page 228

    To use the auxiliary inputs on the rse system, connect an external auxiliary device to the color-coded rca jacks and turn both the auxiliary device and the rse system power on. If the rse system had been previously in the dvd player mode, pressing the srce button on the faceplate or the remote contr...

  • Page 229

    The rse system is capable of outputting audio to the wired headphone jacks on the rear seat audio system (if equipped). The rse system may be selected as an audio source on the rear seat audio system if the rse system power is on. Refer to rear seat audio (rsa) on page 3-97 for more information. Vid...

  • Page 230

    Standard audio cds, cd-r, cd-rw, video cd and photo cd/cd-r media are fully supported by this dvd player. Dvd-r and dvd-rw media is supported if formatted as dvd-video. Dvd+r and dvd+rw media may or may not be supported by the dvd player. The dvd player does not support dvd-ram, dvd-rom, and dvd aud...

  • Page 231

    S (play/pause): press this button to start play of a dvd or cd. Press this button while a dvd or cd is playing to pause it. Press this button again to continue the play of the dvd or cd. Y (main dvd menu): press this button to access the dvd menu. The dvd menu is different on every dvd. Use the up, ...

  • Page 232

    Stopping and resume playback to stop playing a disc, press and release the stop button on the dvd player faceplate or the remote control. To resume playback, press the play/pause button on the dvd player faceplate or the remote control. The movie should resume play from where it was last stopped, if...

  • Page 233

    Remote control buttons o (power): press this button to turn the dvd player on and off. V (title): press this button to return the dvd to the main menu of the dvd. N , q , p , o (menu navigation arrows): use the arrow buttons to navigate through a menu. Z (set-up menu): press this button to adjust th...

  • Page 234

    1 through 0 (numeric keypad): the numeric keypad provides the capability of direct chapter, title, and track number selection. } 10 (double digit entries): press the button, to select chapter, title, and track numbers greater than 9. Press this button before inputting the number. \ (clear): press th...

  • Page 235

    Battery replacement to change the batteries, do the following: 1. Remove the battery compartment door located on the bottom of the remote control. 2. Replace the two aa batteries in the compartment. Make sure that they are installed correctly, using the diagram on the inside of the battery compartme...

  • Page 236

    Problem recommended action in auxiliary mode, the picture moves or scrolls. Check the auxiliary input connections at both devices. Change the video format to pal or ntsc. See “stereo rca jacks” previously for how to change the video format. The language in the audio or on the screen is wrong. Check ...

  • Page 237

    Problem recommended action sometimes the wireless headphone audio cuts out or buzzes. Check for obstructions, low batteries, reception range and interference from cellular telephone towers or by using your cellular telephone in the vehicle. Check that the headphones are facing the front of the vehic...

  • Page 238: Navigation/radio System

    Dvd distortion there may be an experience with audio distortion in the wireless headphones when operating cellular phones, scanners, cb radios, global positioning systems (gps)*, two-way radios, mobile fax, or walkie talkies. It may be necessary to turn off the dvd player when operating one of these...

  • Page 239: Rear Seat Audio (Rsa)

    Rear seat audio (rsa) this feature allows rear seat passengers to listen to any of the sources: radio, cassette tapes, cds, or dvds. However, the rear seat passengers can only control the sources that the front seat passengers are not listening to. For example, rear seat passengers may listen to and...

  • Page 240

    Src (source): press this button to select a source: radio, cassette tapes, cds, or dvds. X seek w : when listening to fm1, fm2, or am, press the up or the down arrow to go to the next or to the previous station and stay there. This function is inactive if the front seat passengers are listening to t...

  • Page 241: Cd Changer

    Cd changer the cd changer plays up to six standard size cds continuously. Individual cds may be loaded or ejected into or from any position. A green light on each numbered button indicates a cd is loaded in the respective position. An amber light on a numbered button indicates that a cd is playing. ...

  • Page 242

    To eject a single cd, perform the following steps: 1. Press the eject button (upward pointing arrow). The buttons with loaded cds will blink amber. 2. Press one of the amber blinking buttons to select the location of the cd you want to eject. The changer will move to that location and eject the cd. ...

  • Page 243

    6 rdm (random): press and release this pushbutton to hear all of the tracks on all of the loaded cds in random, rather than sequential, order. Rdm all will appear on the display. Press and hold this pushbutton to hear the tracks on the current cd in random, rather than sequential order. You will hea...

  • Page 244: Theft-Deterrent Feature

    Theft-deterrent feature theftlock ® is designed to discourage theft of your vehicle’s radio. The feature works automatically by learning a portion of the vehicle identification number (vin). If the radio is moved to a different vehicle, it will not operate and locked will appear on the display. When...

  • Page 245: Radio Reception

    Prog (program): press this button to play a station you have programmed on the radio preset pushbuttons. The radio will only seek preset stations with a strong signal that are in the selected band. When a cd is playing in the cd changer, press this button to go to the next available cd, if multiple ...

  • Page 246

    Care of your cassette tape player a tape player that is not cleaned regularly can cause reduced sound quality, ruined cassettes, or a damaged mechanism. Cassette tapes should be stored in their cases away from contaminants, direct sunlight, and extreme heat. If they are not, they may not operate pro...

  • Page 247: Care Of Your Cd Player

    A non-scrubbing action, wet-type cleaner which uses a cassette with a fabric belt to clean the tape head can be used. This type of cleaning cassette will not eject on its own. A non-scrubbing action cleaner may not clean as thoroughly as the scrubbing type cleaner. The use of a non-scrubbing action,...

  • Page 248: Diversity Antenna System

    Diversity antenna system your am-fm antennas are located in the rear side windows. Be sure that the inside surfaces of the rear side windows are not scratched and that the lines on the glass are not damaged. If the inside surfaces are damaged, they could interfere with radio reception. Notice: using...

  • Page 249: Section 4

    Your driving, the road, and your vehicle ..........4-2 defensive driving ...........................................4-2 drunken driving .............................................4-2 control of a vehicle ........................................4-6 braking .............................................

  • Page 250: Your Vehicle

    Your driving, the road, and your vehicle defensive driving the best advice anyone can give about driving is: drive defensively. Please start with a very important safety device in your vehicle: buckle up. See safety belts: they are for everyone on page 1-28. Defensive driving really means “be ready ...

  • Page 251

    Police records show that almost half of all motor vehicle-related deaths involve alcohol. In most cases, these deaths are the result of someone who was drinking and driving. In recent years, more than 16,000 annual motor vehicle-related deaths have been associated with the use of alcohol, with more ...

  • Page 252

    According to the american medical association, a 180 lb (82 kg) person who drinks three 12 ounce (355 ml) bottles of beer in an hour will end up with a bac of about 0.06 percent. The person would reach the same bac by drinking three 4 ounce (120 ml) glasses of wine or three mixed drinks if each had ...

  • Page 253: Caution:

    The bac will be over 0.10 percent after three to six drinks (in one hour). Of course, as we have seen, it depends on how much alcohol is in the drinks, and how quickly the person drinks them. But the ability to drive is affected well below a bac of 0.10 percent. Research shows that the driving skill...

  • Page 254: Control Of A Vehicle

    Control of a vehicle you have three systems that make your vehicle go where you want it to go. They are the brakes, the steering, and the accelerator. All three systems have to do their work at the places where the tires meet the road. Sometimes, as when you are driving on snow or ice, it is easy to...

  • Page 255

    Anti-lock brake system (abs) your vehicle has anti-lock brakes. Abs is an advanced electronic braking system that will help prevent a braking skid. When you start your engine and begin to drive away, your anti-lock brake system will check itself. You may hear a momentary motor or clicking noise whil...

  • Page 256: Braking In Emergencies

    The anti-lock system can change the brake pressure faster than any driver could. The computer is programmed to make the most of available tire and road conditions. This can help you steer around the obstacle while braking hard. As you brake, your computer keeps receiving updates on wheel speed and c...

  • Page 257: Road Sensing Suspension

    Road sensing suspension the road sensing suspension (rss) feature provides superior vehicle ride and handling under a variety of passenger and loading conditions. The system is fully automatic and uses a computer controller to continuously monitor vehicle speed, wheel to body position, lift/dive and...

  • Page 258

    The stability sys active message will appear on the driver information center (dic) only when the system is both on and activated. It means that an advanced computer-controlled system has come on to help your vehicle continue to go in the direction in which you’re steering. Stabilitrak ® activates w...

  • Page 259

    When the stabilitrak ® system has been turned off you may still hear system noises as a result of the brake-traction control coming on. To limit wheel spin and realize the full benefits of the stability enhancement system, you should normally leave stabilitrak ® on, but it may be necessary to turn t...

  • Page 260

    If the brake traction-control system activates constantly or if the brakes have heated up due to high-speed braking, brake traction-control will be disabled and the traction sys limited message will be displayed. In the limited mode, the traction control system will only use engine traction-control ...

  • Page 261: Steering

    Steering power steering if you lose power steering assist because the engine stops or the system is not functioning, you can steer but it will take much more effort. Steering tips driving on curves it is important to take curves at a reasonable speed. A lot of the “driver lost control” accidents men...

  • Page 262

    Steering in emergencies there are times when steering can be more effective than braking. For example, you come over a hill and find a truck stopped in your lane, or a car suddenly pulls out from nowhere, or a child darts out from between parked cars and stops right in front of you. You can avoid th...

  • Page 263: Off-Road Recovery

    Off-road recovery you may find that your right wheels have dropped off the edge of a road onto the shoulder while you are driving. If the level of the shoulder is only slightly below the pavement, recovery should be fairly easy. Ease off the accelerator and then, if there is nothing in the way, stee...

  • Page 264

    • do not get too close to the vehicle you want to pass while you are awaiting an opportunity. For one thing, following too closely reduces your area of vision, especially if you are following a larger vehicle. Also, you will not have adequate space if the vehicle ahead suddenly slows or stops. Keep ...

  • Page 265: Loss Of Control

    Loss of control let us review what driving experts say about what happens when the three control systems — brakes, steering, and acceleration — do not have enough friction where the tires meet the road to do what the driver has asked. In any emergency, do not give up. Keep trying to steer and consta...

  • Page 266: Vehicle Off Paved Roads

    Operating your all-wheel-drive vehicle off paved roads this off-road guide is for vehicles that have all-wheel drive. If your vehicle does not have all-wheel drive or if it has 20-inch tire/wheel assemblies, you should not drive off-road unless you are on a level, solid surface. See tires on page 5-...

  • Page 267: Caution:

    Loading your vehicle for off-road driving there are some important things to remember about how to load your vehicle. • the heaviest things should be on the load floor and forward of your rear axle. Put heavier items as far forward as you can. • be sure the load is secured properly, so driving on th...

  • Page 268

    Environmental concerns off-road driving can provide wholesome and satisfying recreation. However, it also raises environmental concerns. We recognize these concerns and urge every off-roader to follow these basic rules for protecting the environment: • always use established trails, roads and areas ...

  • Page 269: Caution:

    Controlling your vehicle is the key to successful off-road driving. One of the best ways to control your vehicle is to control your speed. Here are some things to keep in mind. At higher speeds: • you approach things faster and you have less time to scan the terrain for obstacles. • you have less ti...

  • Page 270: Caution:

    When you drive over obstacles or rough terrain, keep a firm grip on the steering wheel. Ruts, troughs or other surface features can jerk the wheel out of your hands if you are not prepared. When you drive over bumps, rocks, or other obstacles, your wheels can leave the ground. If this happens, even ...

  • Page 271

    Approaching a hill when you approach a hill, you need to decide if it is one of those hills that is just too steep to climb, descend or cross. Steepness can be hard to judge. On a very small hill, for example, there may be a smooth, constant incline with only a small change in elevation where you ca...

  • Page 272: Caution:

    Driving uphill once you decide you can safely drive up the hill, you need to take some special steps. • use a low gear and get a firm grip on the steering wheel. • get a smooth start up the hill and try to maintain your speed. Do not use more power than you need, because you do not want your wheels ...

  • Page 273

    Q: what should i do if my vehicle stalls, or is about to stall, and i cannot make it up the hill? A: if this happens, there are some things you should do, and there are some things you must not do? First, here is what you should do: • push the brake pedal to stop the vehicle and keep it from rolling...

  • Page 274: Caution:

    Driving downhill when off-roading takes you downhill, you will want to consider a number of things: • how steep is the downhill? Will i be able to maintain vehicle control? • what’s the surface like? Smooth? Rough? Slippery? Hard-packed dirt? Gravel? • are there hidden surface obstacles? Ruts? Logs?...

  • Page 275

    Q: am i likely to stall when going downhill? A: it is much more likely to happen going uphill. But if it happens going downhill, here is what to do. 1. Stop your vehicle by applying the regular brakes. Apply the parking brake. 2. Shift to park (p) and, while still braking, restart the engine. 3. Shi...

  • Page 276: Caution:

    For reasons like these, you need to decide carefully whether to try to drive across an incline. Just because the trail goes across the incline does not mean you have to drive it. The last vehicle to try it might have rolled over. { caution: driving across an incline that is too steep will make your ...

  • Page 277: Caution:

    { caution: getting out on the downhill (low) side of a vehicle stopped across an incline is dangerous. If the vehicle rolls over, you could be crushed or killed. Always get out on the uphill (high) side of the vehicle and stay well clear of the rollover path. Driving in mud, sand, snow or ice when y...

  • Page 278: Caution:

    Driving in water heavy rain can mean flash flooding, and flood waters demand extreme caution. Find out how deep the water is before you drive through it. If it is deep enough to cover your wheel hubs, axles or exhaust pipe, do not try it — you probably will not get through. Also, water that deep can...

  • Page 279: Driving At Night

    After off-road driving remove any brush or debris that has collected on the underbody, chassis or under the hood. These accumulations can be a fire hazard. After operation in mud or sand, have the brake linings cleaned and checked. These substances can cause glazing and uneven braking. Check the bod...

  • Page 280

    Here are some tips on night driving. • drive defensively. • do not drink and drive. • since you cannot see as well, you may need to slow down and keep more space between you and other vehicles. • slow down, especially on higher speed roads. Your headlamps can light up only so much road ahead. • in r...

  • Page 281

    Driving in rain and on wet roads rain and wet roads can mean driving trouble. On a wet road, you cannot stop, accelerate, or turn as well because your tire-to-road traction is not as good as on dry roads. And, if your tires do not have much tread left, you will get even less traction. It is always w...

  • Page 282: Caution:

    Driving too fast through large water puddles or even going through some car washes can cause problems, too. The water may affect your brakes. Try to avoid puddles. But if you cannot, try to slow down before you hit them. { caution: wet brakes can cause accidents. They will not work as well in a quic...

  • Page 283: Caution:

    Driving through flowing water { caution: flowing or rushing water creates strong forces. If you try to drive through flowing water, as you might at a low water crossing, your vehicle can be carried away. As little as six inches of flowing water can carry away a smaller vehicle. If this happens, you ...

  • Page 284: City Driving

    City driving one of the biggest problems with city streets is the amount of traffic on them. You will want to watch out for what the other drivers are doing and pay attention to traffic signals. Here are ways to increase your safety in city driving: • know the best way to get to where you are going....

  • Page 285: Freeway Driving

    Freeway driving mile for mile, freeways — also called thruways, parkways, expressways, turnpikes, or superhighways — are the safest of all roads. But they have their own special rules. The most important advice on freeway driving is: keep up with traffic and keep to the right. Drive at the same spee...

  • Page 286

    Once you are moving on the freeway, make certain you allow a reasonable following distance. Expect to move slightly slower at night. When you want to leave the freeway, move to the proper lane well in advance. If you miss your exit, do not, under any circumstances, stop and back up. Drive on to the ...

  • Page 287: Highway Hypnosis

    Highway hypnosis is there actually such a condition as highway hypnosis? Or is it just plain falling asleep at the wheel? Call it highway hypnosis, lack of awareness, or whatever. There is something about an easy stretch of road with the same scenery, along with the hum of the tires on the road, the...

  • Page 288: Caution:

    • keep your vehicle in good shape. Check all fluid levels and also the brakes, tires, cooling system, and transmission. These parts can work hard on mountain roads. • know how to go down hills. The most important thing to know is this: let your engine do some of the slowing down. Shift to a lower ge...

  • Page 289: Winter Driving

    Winter driving here are some tips for winter driving: • have your vehicle in good shape for winter. • you may want to put winter emergency supplies in your vehicle. Also see tires on page 5-60. Include an ice scraper, a small brush or broom, a supply of windshield washer fluid, a rag, some winter ou...

  • Page 290

    Driving on snow or ice most of the time, those places where your tires meet the road probably have good traction. However, if there is snow or ice between your tires and the road, you can have a very slippery situation. You will have a lot less traction, or grip, and will need to very careful. What ...

  • Page 291

    • allow greater following distance on any slippery road. • watch for slippery spots. The road might be fine until you hit a spot that is covered with ice. On an otherwise clear road, ice patches may appear in shaded areas where the sun cannot reach, such as around clumps of trees, behind buildings, ...

  • Page 292: Caution:

    You can run the engine to keep warm, but be careful. { caution: snow can trap exhaust gases under your vehicle. This can cause deadly co (carbon monoxide) gas to get inside. Co could overcome you and kill you. You cannot see it or smell it, so you might not know it is in your vehicle. Clear away sno...

  • Page 293: Or Snow

    Then, shut the engine off and close the window almost all the way to preserve the heat. Start the engine again and repeat this only when you feel really uncomfortable from the cold. But do it as little as possible. Preserve the fuel as long as you can. To help keep warm, you can get out of the vehic...

  • Page 294: Recovery Hooks

    Rocking your vehicle to get it out first, turn your steering wheel left and right. That will clear the area around your front wheels. If your vehicle has the stabilitrak ® system, turn the system off by pressing the stabilitrak ® button so that the stability sys disabled message and the traction off...

  • Page 295: Loading Your Vehicle

    Notice: never use recovery hooks to tow the vehicle. Your vehicle could be damaged and it would not be covered by warranty. Loading your vehicle it is very important to know how much weight your vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occup...

  • Page 296

    The tire and loading information label also shows the size of the original equipment tires (c) and the recommended cold tire inflation pressures (d). For more information on tires and inflation see tires on page 5-60 and inflation - tire pressure on page 5-67. There is also important loading informa...

  • Page 297

    Item description total a vehicle capacity weight for example 1 = 1,000 lbs (453 kg) b subtract occupant weight 150 lbs (68 kg) × 2 = 300 lbs (136 kg) c available occupant and cargo weight = 700 lbs (317 kg) item description total a vehicle capacity weight for example 2 = 1,000 lbs (453 kg) b subtrac...

  • Page 298

    Item description total a vehicle capacity weight for example 3 = 1,000 lbs (453 kg) b subtract occupant weight 200 lbs (91 kg) × 5 = 1,000 lbs (453 kg) c available cargo weight = 0 lbs (0 kg) refer to your vehicle’s tire and loading information label for specific information about your vehicle’s cap...

  • Page 299: Caution:

    Certification/tire label a vehicle specific certification/tire label is attached to the rear edge of the driver’s door. The label shows the size of your vehicle’s original tires and the inflation pressures needed to obtain the gross weight capacity of your vehicle. This is called gross vehicle weigh...

  • Page 300: Caution:

    Using heavier suspension components to get added durability might not change your weight ratings. Ask your dealer to help you load your vehicle the right way. If you put things inside your vehicle—like suitcases, tools, packages, or anything else—they go as fast as the vehicle goes. If you have to s...

  • Page 301: Towing

    Automatic level control the automatic level control rear suspension comes as a part of the road sensing suspension. See road sensing suspension on page 4-9. This type of level control is fully automatic and will provide a better leveled riding position as well as better handling under a variety of p...

  • Page 302: Trailer Recommendations

    Dinghy towing and dolly towing all-wheel drive vehicles your vehicle is not designed to be towed with any of the wheels on the ground. If your vehicle must be towed, see towing your vehicle on page 4-53. Notice: towing an all-wheel-drive vehicle with all four wheels on the ground, or even with only ...

  • Page 303

    Notice: pulling a trailer improperly can damage your vehicle and result in costly repairs not covered by your warranty. To pull a trailer correctly, follow the advice in this part, and see your dealer for important information about towing a trailer with your vehicle. To identify the trailering capa...

  • Page 304

    Tow/haul mode tow/haul is designed to assist while your vehicle is pulling a large or heavy load or trailer. Tow/haul is most useful while pulling such a load in rolling terrain, in stop-and-go traffic, or when you need improved low-speed control, such as when parking. The purpose of the tow/haul mo...

  • Page 305

    A light on the instrument panel will illuminate to indicate that tow/haul mode has been selected. The vehicle will automatically turn off tow/haul every time it is started. Driving with tow/haul activated without a heavy load or with no trailer will cause reduced fuel economy and unpleasant engine a...

  • Page 306

    Weight of the trailer how heavy can a trailer safely be? It depends on how you plan to use your rig. For example, speed, altitude, road grades, outside temperature and how much your vehicle is used to pull a trailer are all important. And, it can also depend on any special equipment that you have on...

  • Page 307

    Weight of the trailer tongue the tongue load (a) of any trailer is an important weight to measure because it affects the total or gross weight of your vehicle. The gross vehicle weight (gvw) includes the curb weight of the vehicle, any cargo you may carry in it, and the people who will be riding in ...

  • Page 308

    Total weight on your vehicle’s tires be sure your vehicle’s tires are inflated to the upper limit for cold tires. You’ll find these numbers on the certification label at the rear edge of the driver’s door or see loading your vehicle on page 4-47. Then be sure you don’t go over the gvw limit for your...

  • Page 309

    When using a weight-distributing hitch, the hitch must be adjusted so that the distance (a) remains the same both before and after coupling the trailer to the tow vehicle. If you’ll be pulling a trailer that, when loaded, will weigh more than 5,000 lbs (2 270 kg) be sure to use a properly mounted we...

  • Page 310: Caution:

    Driving with a trailer { caution: if you have a rear-most window open and you pull a trailer with your vehicle, carbon monoxide (co) could come into your vehicle. You can not see or smell co. It can cause unconsciousness or death. See engine exhaust on page 2-28. To maximize your safety when towing ...

  • Page 311

    Following distance stay at least twice as far behind the vehicle ahead as you would when driving your vehicle without a trailer. This can help you avoid situations that require heavy braking and sudden turns. Passing you’ll need more passing distance up ahead when you’re towing a trailer. And, becau...

  • Page 312: Caution:

    Driving on grades reduce speed and shift to a lower gear before you start down a long or steep downgrade. If you don’t shift down, you might have to use your brakes so much that they would get hot and no longer work well. You can tow in drive (d). You may want to shift the transmission to third (3) ...

  • Page 313

    When you are ready to leave after parking on a hill 1. Apply your regular brakes and hold the pedal down while you: • start your engine, • shift into a gear, and • release the parking brake. 2. Let up on the brake pedal. 3. Drive slowly until the trailer is clear of the chocks. 4. Stop and have some...

  • Page 314

    The seven-wire harness contains the following trailer circuits: • yellow: left stop/turn signal • dark green: right stop/turn signal • brown: taillamps • white: ground • light green: back-up lamps • red: battery feed • dark blue: trailer brake electric brake control jumper this harness may be includ...

  • Page 315

    Four-wire harness adapter this adapter may be included with your vehicle as part of the heavy-duty trailer wiring package. Use this adapter to connect a standard four-way round pin connector to the seven-wire harness on your vehicle. Connect the adapter with the tab pointing up. The flip cap on the ...

  • Page 316: Notes

    ✍ notes 4-68.

  • Page 317: Section 5

    Service ............................................................5-3 doing your own service work .........................5-4 adding equipment to the outside of your vehicle ...........................................5-4 fuel ................................................................5-5 gas...

  • Page 318: Section 5

    Inflation - tire pressure .................................5-67 tire pressure monitor system .........................5-68 tire inspection and rotation ...........................5-71 when it is time for new tires .......................5-73 buying new tires ............................................

  • Page 319: Service

    Service your dealer knows your vehicle best and wants you to be happy with it. We hope you will go to your dealer for all your service needs. You will get genuine gm parts and gm-trained and supported service people. We hope you will want to keep your gm vehicle all gm. Genuine gm parts have one of ...

  • Page 320: Caution:

    Doing your own service work if you want to do some of your own service work, you will want to use the proper service manual. It tells you much more about how to service your vehicle than this manual can. To order the proper service manual, see service publications ordering information on page 7-13. ...

  • Page 321: Fuel

    Fuel the 8th digit of your vehicle identification number (vin) shows the code letter or number that identifies your engine. You will find the vin at the top left of the instrument panel. See vehicle identification number (vin) on page 5-107. Gasoline octane if your vehicle has the 5.3l engine (vin c...

  • Page 322: California Fuel

    California fuel if your vehicle is certified to meet california emission standards (see the underhood emission control label), it is designed to operate on fuels that meet california specifications. If this fuel is not available in states adopting california emissions standards, your vehicle will op...

  • Page 323

    Gasolines containing oxygenates, such as ethers and ethanol, and reformulated gasolines may be available in your area to contribute to clean air. General motors recommends that you use these gasolines, particularly if they comply with the specifications described earlier. Notice: your vehicle was no...

  • Page 324: Filling Your Tank

    Filling your tank { caution: fuel vapor burns violently and a fuel fire can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the pump island. Turn off your engine when you are refueling. Do not smoke if you are near fuel or refueling your vehicle....

  • Page 325: Caution:

    Be careful not to spill fuel. Do not top off or overfill the tank and wait a few seconds after you have finished pumping before removing the nozzle. Clean fuel from painted surfaces as soon as possible. See washing your vehicle on page 5-103. When replacing the fuel cap, turn it to the right (clockw...

  • Page 326: Caution:

    Filling a portable fuel container { caution: never fill a portable fuel container while it is in your vehicle. Static electricity discharge from the container can ignite the gasoline vapor. You can be badly burned and your vehicle damaged if this occurs. To help avoid injury to you and others: • dis...

  • Page 327: Hood Release

    Hood release to open the hood do the following: 1. Pull the handle located inside the vehicle to the lower left of the steering wheel. 2. Then go to the front of the vehicle and pull up on the secondary hood release located near the center of the grille. 3. Lift the hood. Before closing the hood, be...

  • Page 328

    Engine compartment overview when you open the hood on the vortec™ 6000 high-output v8 engine, here is what you will see: 5-12.

  • Page 329: Engine Oil

    A. Engine air cleaner/filter. See engine air cleaner/filter on page 5-18. B. Coolant surge tank and pressure cap. See cooling system on page 5-29 and coolant surge tank pressure cap on page 5-26. C. Air filter restriction indicator (if equipped). See engine air cleaner/filter on page 5-18. D. Engine...

  • Page 330

    The engine oil dipstick handle is a yellow loop. See engine compartment overview on page 5-12 for the location of the engine oil dipstick. 1. Turn off the engine and give the oil several minutes to drain back into the oil pan. If you do not do this, the oil dipstick might not show the actual level. ...

  • Page 331

    • sae 5w-30 as shown in the viscosity chart, sae 5w-30 is best for your vehicle. These numbers on an oil container show its viscosity, or thickness. Do not use other viscosity oils such as sae 20w-50. Oils meeting these requirements should also have the starburst symbol on the container. This symbol...

  • Page 332: Engine Oil Life System

    You should look for this information on the oil container, and use only those oils that are identified as meeting gm standard gm6094m and have the starburst symbol on the front of the oil container. Notice: use only engine oil identified as meeting gm standard gm6094m and showing the american petrol...

  • Page 333

    How to reset the engine oil life system the engine oil life system calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior ...

  • Page 334: Engine Air Cleaner/filter

    Engine air cleaner/filter see engine compartment overview on page 5-12 for the location of the engine air cleaner/filter and the air filter restriction indicator, if equipped. When to inspect if your vehicle is equipped with an air filter restriction indicator, it lets you know when the engine air c...

  • Page 335

    Replacing the engine air cleaner/filter and resetting the air filter restriction indicator 1. Locate the air cleaner/filter assembly on the front corner of the engine compartment on the passenger’s side of the vehicle. 2. Loosen the screws on the cover of the housing and lift up the cover. 3. Remove...

  • Page 336: Caution:

    6. Reinstall the cover and tighten the screws. 7. Reset the air filter restriction indicator, if equipped, by pressing the top button on the indicator. { caution: operating the engine with the air cleaner/filter off can cause you or others to be burned. The air cleaner not only cleans the air; it he...

  • Page 337

    How to check because this operation can be a little difficult, you may choose to have this done at the dealership service department. If you do it yourself, be sure to follow all the instructions here, or you could get a false reading on the dipstick. Notice: too much or too little fluid can damage ...

  • Page 338

    Then, without shutting off the engine, follow these steps: the transmission dipstick handle with this graphic is located at the rear of the engine compartment, on the passenger’s side of the vehicle. See engine compartment overview on page 5-12 for more information on location. 1. Flip the handle up...

  • Page 339: Engine Coolant

    How to add fluid refer to the maintenance schedule to determine what kind of transmission fluid to use. See recommended fluids and lubricants on page 6-13. Add fluid only after checking the transmission fluid while it is hot. A cold check is used only as a reference. If the fluid level is low, add o...

  • Page 340: Caution:

    What to use use a mixture of one-half clean, drinkable water and one-half dex-cool ® coolant which will not damage aluminum parts. If you use this coolant mixture, you do not need to add anything else. { caution: adding only plain water to your cooling system can be dangerous. Plain water, or some o...

  • Page 341: Caution:

    Checking coolant the coolant surge tank is located in the engine compartment on the passenger’s side of the vehicle. See engine compartment overview on page 5-12 for more information on location. { caution: turning the surge tank pressure cap when the engine and radiator are hot can allow steam and ...

  • Page 342: Engine Overheating

    Coolant surge tank pressure cap the coolant surge tank pressure cap must be fully installed on the coolant surge tank. Notice: if the pressure cap is not tightly installed, coolant loss and possible engine damage may occur. Be sure the cap is properly and tightly secured. Engine overheating you will...

  • Page 343: Caution:

    If steam is coming from your engine { caution: steam from an overheated engine can burn you badly, even if you just open the hood. Stay away from the engine if you see or hear steam coming from it. Just turn it off and get everyone away from the vehicle until it cools down. Wait until there is no si...

  • Page 344: Operating Mode

    If you get the overheat warning with no sign of steam, try this for a minute or so: 1. If your air conditioner is on, turn it off. 2. Turn on your heater to full hot at the highest fan speed and open the windows as necessary. 3. If you are in a traffic jam, shift to neutral (n); otherwise, shift to ...

  • Page 345: Cooling System

    Cooling system when you decide it is safe to lift the hood, here is what you will see: a. Coolant surge tank b. Coolant surge tank pressure cap c. Electric engine cooling fan (if equipped) { caution: an electric engine cooling fan under the hood can start up even when the engine is not running and c...

  • Page 346: Caution:

    The coolant level should be at or above the full cold mark. If it is not, you may have a leak at the pressure cap or in the radiator hoses, heater hoses, radiator, water pump or somewhere else in the cooling system. { caution: heater and radiator hoses, and other engine parts, can be very hot. Do no...

  • Page 347: Caution:

    How to add coolant to the coolant surge tank if you have not found a problem yet, check to see if coolant is visible in the surge tank. If coolant is visible but the coolant level is not at or above the full cold mark, add a 50/50 mixture of clean, drinkable water and dex-cool ® coolant at the coola...

  • Page 348: Caution:

    { caution: you can be burned if you spill coolant on hot engine parts. Coolant contains ethylene glycol and it will burn if the engine parts are hot enough. Do not spill coolant on a hot engine. 1. You can remove the coolant surge tank pressure cap when the cooling system, including the coolant surg...

  • Page 349

    3. Fill the coolant surge tank with the proper mixture, to the full cold mark. 4. With the coolant surge tank pressure cap off, start the engine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine cooling fan. By this time, the coolant level inside the coo...

  • Page 350: Engine Fan Noise

    Engine fan noise if your vehicle is equipped with a clutched engine cooling fan, when the clutch is engaged, the fan spins faster to provide more air to cool the engine. In most everyday driving conditions, the fan is spinning slower and the clutch is not fully engaged. This improves fuel economy an...

  • Page 351: Windshield Washer Fluid

    How to check power steering fluid locate the cap with this symbol. See engine compartment overview on page 5-12 for more information on location. To check the power steering fluid, do the following: 1. Turn the key off and let the engine compartment cool down. 2. Wipe the cap and the top of the rese...

  • Page 352: Brakes

    Open the cap with the washer symbol on it. Add washer fluid until the tank is full. See engine compartment overview on page 5-12 for reservoir location. Notice: • when using concentrated washer fluid, follow the manufacturer’s instructions for adding water. • do not mix water with ready-to-use washe...

  • Page 353: Caution:

    So, it is not a good idea to top off your brake fluid. Adding brake fluid will not correct a leak. If you add fluid when your linings are worn, then you will have too much fluid when you get new brake linings. You should add or remove brake fluid, as necessary, only when work is done on the brake hy...

  • Page 354: Caution:

    What to add when you do need brake fluid, use only dot-3 brake fluid. Use new brake fluid from a sealed container only. See recommended fluids and lubricants on page 6-13. Always clean the brake fluid reservoir cap and the area around the cap before removing it. This will help keep dirt from enterin...

  • Page 355: Caution:

    Brake wear your vehicle has four-wheel disc brakes. Disc brake pads have built-in wear indicators that make a high-pitched warning sound when the brake pads are worn and new pads are needed. The sound may come and go or be heard all the time your vehicle is moving, except when you are pushing on the...

  • Page 356: Battery

    Replacing brake system parts the braking system on a vehicle is complex. Its many parts have to be of top quality and work well together if the vehicle is to have really good braking. Your vehicle was designed and tested with top-quality gm brake parts. When you replace parts of your braking system ...

  • Page 357: Jump Starting

    Jump starting if your battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely. { caution: batteries can hurt you. They can be dangerous because: • they contain acid that can burn you. • they contain ga...

  • Page 358

    4. Open the hoods and locate the positive (+) and negative ( − ) terminal locations of the other vehicle. Your vehicle has a remote positive (+) jump starting terminal and a remote negative ( − ) jump starting terminal. You should always use these remote terminals instead of the terminals on the bat...

  • Page 359: Caution:

    { caution: using a match near a battery can cause battery gas to explode. People have been hurt doing this, and some have been blinded. Use a flashlight if you need more light. Be sure the battery has enough water. You do not need to add water to the battery installed in your new vehicle. But if a b...

  • Page 360

    8. Now connect the black negative ( − ) cable to the negative ( − ) terminal of the good battery. Use a remote negative ( − ) terminal if the vehicle has one. Do not let the other end touch anything until the next step. The other end of the negative ( − ) cable does not go to the dead battery. It go...

  • Page 361: All-Wheel Drive

    To disconnect the jumper cables from both vehicles do the following: 1. Disconnect the black negative ( − ) cable from the vehicle that had the dead battery. 2. Disconnect the black negative ( − ) cable from the vehicle with the good battery. 3. Disconnect the red positive (+) cable from the vehicle...

  • Page 362: Rear Axle

    What to use refer to the maintenance schedule to determine what kind of lubricant to use. See recommended fluids and lubricants on page 6-13. Rear axle when to check lubricant it is not necessary to regularly check rear axle fluid unless you suspect there is a leak or you hear an unusual noise. A fl...

  • Page 363: Front Axle

    Front axle when to check and change lubricant it is not necessary to regularly check front axle fluid unless you suspect there is a leak or you hear an unusual noise. A fluid loss could indicate a problem. Have it inspected and repaired. How to check lubricant to get an accurate reading, the vehicle...

  • Page 364: Headlamp Aiming

    Headlamp aiming your vehicle has a visual optical headlamp aiming system equipped with horizontal aim indicators. The aim has been preset at the factory and should need no further adjustment. This is true even though your horizontal aim indicators may not fall exactly on the “0” (zero) marks on thei...

  • Page 365: Headlamp Horizontal Aiming

    The headlamp aiming devices are under the hood near the headlamps. If you believe your headlamps need horizontal (h) (left/right) adjustment, follow the horizontal aiming procedure. If you believe your headlamps need only vertical (v) (up/down) adjustment, follow only the vertical aiming procedure. ...

  • Page 366: Headlamp Vertical Aiming

    Headlamp vertical aiming notice: horizontal aiming must be performed before making any adjustments to the vertical aim. Adjusting the vertical aim first will result in an incorrect headlamp aim. To adjust the headlamp veritcal aiming, do the following: 1. Find the aim dot on the lens of the low beam...

  • Page 367: Bulb Replacement

    5. Turn the vertical aiming screw (v) until the headlamp beam is aimed to the horizontal tape line. The top edge of the cut-off should be positioned at the bottom edge of the horizontal tape line. 6. Repeat steps 4 and 5 for the opposite headlamp. Bulb replacement for the proper type of replacement ...

  • Page 368: Halogen Bulbs

    Halogen bulbs { caution: halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb. You or others could be injured. Be sure to read and follow the instructions on the bulb package. Headlamps a. Low-beam headlamp (hid) b. Daytime running lamp (drl) c. Sidemarker lamp d. ...

  • Page 369

    To replace a headlamp bulb, do the following: 1. Open the hood of the vehicle. See hood release on page 5-11 for more information. 2. Pry up the eight fastener plugs on the radiator cover and pull the fasteners out. 3. Lift off the radiator cover. 4. Pull the top left or right corner of the grill ou...

  • Page 370

    5. Remove the horizontal pin from the headlamp assembly by lifting the end of the pin upward until it unsnaps and then pulling it toward the center of the vehicle. 6. Remove the vertical pin from the headlamp assembly by turning the end of the pin away from you until it unsnaps and then pulling it u...

  • Page 371

    9. Remove the rubber, circular-shaped bulb cap of the affected bulb from the headlamp assembly. 10. Turn the bulb connector counterclockwise and remove it with the old bulb from the headlamp assembly. 11. Unplug the electrical connector from the old bulb. 12. Plug in the electrical connector to the ...

  • Page 372: Daytime Running Lamps

    Front turn signal, sidemarker and daytime running lamps a. Low-beam headlamp (hid) b. Daytime running lamp (drl) c. Sidemarker lamp d. High-beam headlamp e. Front parking/turn signal lamp to replace a front turn signal, sidemarker or drl bulb, do the following: 1. Remove the headlamp assembly as des...

  • Page 373: Taillamps

    Taillamps a. Turn signal/taillamp b. Stoplamp/taillamp c. Back-up lamp d. Sidemarker lamp to replace a taillamp bulb, do the following: 1. Remove the two screws from the lamp assembly. 2. Remove the lamp assembly. 3. Press the release tab and turn the bulb socket counterclockwise to remove it from t...

  • Page 374: Replacement Bulbs

    4. Pull the bulb straight out from the socket. 5. Press a new bulb into the socket, insert it into the taillamp housing and turn the socket clockwise into the taillamp housing until it clicks. The sidemarker lamp does not have a release tab and therefore will not click when it is installed. 6. Reins...

  • Page 375: Windshield Wiper Blade

    Windshield wiper blade replacement windshield wiper blades should be inspected at least twice a year for wear and cracking. See scheduled maintenance on page 6-4 for more information. Replacement blades come in different types and are removed in different ways. For proper type and length, see normal...

  • Page 376: Tires

    Tires your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever have questions about your tire warranty and where to obtain service, see your gm warranty booklet for details. For additional information refer to the tire manufacturer’s booklet included with your ...

  • Page 377: Tire Sidewall Labelling

    Tire sidewall labelling useful information about a tire is molded into the sidewall. The following illustrations are examples of a typical p-metric and a lt-metric tire sidewall. (a) tire size: the tire size code is a combination of letters and numbers used to define a particular tire’s width, heigh...

  • Page 378

    (a) tire size: the tire size code is a combination of letters and numbers used to define a particular tire’s width, height, aspect ratio, construction type and service description. See the “tire size” illustration later in this section for more detail. (b) tpc spec (tire performance criteria specifi...

  • Page 379

    (e) tire identification number (tin): the letters and numbers following dot code are the tire identification number (tin). The tin shows the manufacturer and plant code, tire size, and date the tire was manufactured. The tin is molded onto both sides of the tire, although only one side may have the ...

  • Page 380

    (a) light truck (lt-metric) tire: the united states version of a metric tire sizing system. The letters lt as the first two characters in the tire size means a light truck tire engineered to standards set by the u.S. Tire and rim association. (b) tire width: the three-digit number indicates the tire...

  • Page 381

    Curb weight: this means the weight of a motor vehicle with standard and optional equipment including the maximum capacity of fuel, oil and coolant, but without passengers and cargo. Dot markings: a code molded into the sidewall of a tire signifying that the tire is in compliance with the u.S. Depart...

  • Page 382

    Passenger (p-metric) tire: a tire used on passenger cars and some light duty trucks and multipurpose vehicles. Recommended inflation pressure: vehicle manufacturer’s recommended tire inflation pressure and shown on the tire placard. See inflation - tire pressure on page 5-67 and loading your vehicle...

  • Page 383: Inflation - Tire Pressure

    Inflation - tire pressure tires need the correct amount of air pressure to operate effectively. Notice: do not let anyone tell you that under-inflation or over-inflation is all right. It is not. If your tires do not have enough air (under-inflation), you can get the following: • too much flexing • t...

  • Page 384

    Remove the valve cap from the tire valve stem. Press the tire gage firmly onto the valve to get a pressure measurement. If the cold tire inflation pressure matches the recommended pressure on the tire and loading information label, no further adjustment is necessary. If the inflation pressure is low...

  • Page 385

    The tire and loading information label (tire information placard) shows the size of your vehicle’s original tires and the correct inflation pressure for your vehicle’s tires when they are cold. See inflation - tire pressure on page 5-67. For the location of the tire and loading information label, se...

  • Page 386

    5. Remove the valve cap from the valve cap stem. Activate the tpm sensor by increasing or decreasing the tire’s air pressure for 10 seconds, then stop and listen for a single horn chirp. The single horn chirp should sound within 15 seconds, confirming that the sensor identification code has been mat...

  • Page 387

    Federal communications commission and industry and science canada the tpm system operates on a radio frequency subject to federal communications commission (fcc) rules and with industry and science canada. This device complies with part 15 of the fcc rules and with rss-210 of industry and science ca...

  • Page 388: Caution:

    The purpose of regular rotation is to achieve more uniform wear for all tires on the vehicle. The first rotation is the most important. See scheduled maintenance on page 6-4. When rotating your tires, always use the correct rotation pattern shown here. Do not include the spare tire in your tire rota...

  • Page 389

    When it is time for new tires one way to tell when it’s time for new tires is to check the treadwear indicators, which will appear when your tires have only 1/16 inch (1.6 mm) or less of tread remaining. Some commercial truck tires may not have treadwear indicators. You need a new tire if any of the...

  • Page 390: Buying New Tires

    Buying new tires to find out what kind and size of tires you need, look at the certification/tire label or the tire and loading information label. See loading your vehicle on page 4-47 for more information about these labels and where they can be found on your vehicle. The tires installed on your ve...

  • Page 391: Caution:

    { caution: if you use bias-ply tires on your vehicle, the wheel rim flanges could develop cracks after many miles of driving. A tire and/or wheel could fail suddenly, causing a crash. Use only radial-ply tires with the wheels on your vehicle. Uniform tire quality grading quality grades can be found ...

  • Page 392: Wheel Replacement

    Traction – aa, a, b, c the traction grades, from highest to lowest, are aa, a, b, and c. Those grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked c may have poor traction per...

  • Page 393: Caution:

    Each new wheel should have the same load-carrying capacity, diameter, width, offset and be mounted the same way as the one it replaces. If you need to replace any of your wheels, wheel bolts or wheel nuts, replace them only with new gm original equipment parts. This way, you will be sure to have the...

  • Page 394: Tire Chains

    Tire chains { caution: do not use tire chains. There is not enough clearance. Tire chains used on a vehicle without the proper amount of clearance can cause damage to the brakes, suspension or other vehicle parts. The area damaged by the tire chains could cause you to lose control of your vehicle an...

  • Page 395: Caution:

    { caution: lifting a vehicle and getting under it to do maintenance or repairs is dangerous without the appropriate safety equipment and training. The jack provided with your vehicle is designed only for changing a flat tire. If it is used for anything else, you or others could be badly injured or k...

  • Page 396

    When you have a flat tire, use the following example as a guide to assist you in the placement of wheel blocks. The following information will tell you next how to use the jack and change a tire. Removing the spare tire and tools a. Retaining bracket and wing nut b. Tool kit and jack tools c. Jack d...

  • Page 397

    A. Knob b. Removable tray c. Retaining hook d. Retaining bracket and wing nut e. Tool kit and jack tools f. Mounting bracket g. Wing nut holding tire blocks h. Wheel blocks i. Jack for escalade, the equipment is located behind the left trim panel in the rear of the vehicle. Unlatch the release lever...

  • Page 398

    A. Spare tire (valve stem pointed down) b. Hoist assembly c. Hoist cable d. Tire retainer e. Hoist shaft f. Hoist end of extension tool g. Hoist shaft access hole h. Wheel wrench i. Jack handle extensions j. Hoist lock (if equipped) 1. Open the spare tire lock cover on the bumper and use the ignitio...

  • Page 399

    3. Insert the hoist end (open end) (f) of the extension through the hole (g) in the rear bumper. Be sure the hoist end of the extension connects to the hoist shaft (e). The ribbed square end of the extension is used to lower the spare tire. 4. Turn the wheel wrench (h) counterclockwise to lower the ...

  • Page 400: Installing The Spare Tire

    Removing the flat tire and installing the spare tire use the following pictures and instructions to remove the flat tire and raise the vehicle. The tools you’ll be using include the jack (a), the wheel blocks (b), the jack handle (c), the jack handle extensions (d), and the wheel wrench (e). 1. Remo...

  • Page 401

    2. Use the wheel wrench to loosen all the wheel nuts. Turn the wheel wrench counterclockwise to loosen the wheel nuts. Don’t remove the wheel nuts yet. These locations for the front (a) and rear (b) are the general area of jack placement. See text and art following for the exact jack placement. Jack...

  • Page 402: Caution:

    { caution: getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack. { caution: raising your vehicle with the jack improperly positioned can damage the vehicle and ...

  • Page 403: Caution:

    Rear tire flat: if the flat tire is on a rear tire of the vehicle, you’ll need to use the jack handle (c) and both jack handle extensions (d). Attach the wheel wrench to the jack handle extensions. Attach the jack handle to the jack. Use the jacking pad provided on the rear axle. 4. Turn the wheel w...

  • Page 404: Caution:

    6. Remove any rust or dirt from the wheel bolts, mounting surfaces and spare wheel. { caution: never use oil or grease on studs or nuts. If you do, the nuts might come loose. Your wheel could fall off, causing a serious accident. 7. Put the wheel nuts back on after mounting the spare, with the round...

  • Page 405: Caution:

    { caution: incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to come loose and even come off. This could lead to an accident. Be sure to use the correct wheel nuts. If you have to replace them, be sure to get new gm original equipment wheel nuts. Stop somewhere as soon as y...

  • Page 406: Secondary Latch System

    Secondary latch system your vehicle has an underbody-mounted tire hoist assembly equipped with a secondary latch system. It is designed to stop the spare tire from suddenly falling off your vehicle. For the secondary latch to work, the spare must be installed with the valve stem pointing down. See s...

  • Page 407

    4. Repeat this procedure at least two times. If the spare tire lowers to the ground, continue with step 5 of removing the spare tire and tools on page 5-80. 5. If the spare does not lower, turn the wrench counterclockwise until approximately 6 inches (15 cm) of cable is exposed. 6. Stand the wheel b...

  • Page 408: Caution:

    9. Position the center lift point of the jack under the center of the spare tire. 10. Turn the wrench clockwise to raise the jack until it lifts the end fitting. 11. Continue raising the jack until the spare tire stops moving upward and is held firmly in place. The secondary latch has released and t...

  • Page 409

    13. Disconnect the jack handle from the jack and carefully remove the jack. Use one hand to push against the spare while firmly pulling the jack out from under the spare tire with the other hand. If the spare tire is hanging from the cable, insert the hoist handle, extension and wheel wrench into th...

  • Page 410: Tools

    Storing a flat or spare tire and tools { caution: storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place. Notice: storing an aluminum wheel wit...

  • Page 411

    1. Put the tire on the ground at the rear of the vehicle with the valve stem pointed down and to the rear of the vehicle. 2. Tilt the retainer (d) downward and through the wheel opening. Make sure the retainer is fully seated across the underside of the wheel. 3. Attach the wheel wrench (h) and exte...

  • Page 412

    4. Insert the hoist end (f) through the hole (g) in the rear bumper and into the hoist shaft. 5. Raise the tire part way upward. Make sure the retainer is seated in the wheel opening. 6. Raise the tire fully against the underside of the vehicle by turning the wheel wrench clockwise until you hear tw...

  • Page 413

    To store the tools, follow these procedures: for escalade, do the following: 1. Put the tool kit and the jack tools in the tool bag and place in the retaining clip above the jack. 2. Tighten down with the wing nut. 3. Assemble wheel blocks and jack together with the wing nut and retaining hook. 4. P...

  • Page 414: Spare Tire

    A. Knob b. Removable tray c. Retaining hook d. Retaining bracket and wing nut e. Tool kit and jack tools f. Mounting bracket g. Wing nut holding tire blocks h. Wheel blocks i. Jack spare tire your vehicle, when new, had a fully-inflated spare tire. A spare tire may lose air over time, so check its i...

  • Page 415: Appearance Care

    Appearance care cleaning products can be hazardous. Some are toxic. Other cleaning products can burst into flames if a match is struck near them or if they get on a hot part of the vehicle. Some are dangerous if their fumes are inhaled in an enclosed space. When anything from a container is used to ...

  • Page 416

    Most stains can be removed with club soda water. To clean, use the following instructions: 1. For liquids: blot with a clean, soft, white cloth. For solids: remove as much as possible and then vacuum or brush. 2. Apply club soda water to a clean, soft, white cloth. Do not over-saturate; the cloth sh...

  • Page 417: Vinyl

    Stains caused by oil and grease can be cleaned with an approved gm cleaner and a clean, white cloth. 1. Carefully scrape off excess stain. 2. Clean with cool water and allow to dry completely. 3. If a stain remains, follow the “using cleaner on fabric” instructions described earlier. Vinyl use warm ...

  • Page 418: Speaker Covers

    Speaker covers vacuum around a speaker cover gently, so that the speaker will not be damaged. Clean spots with just water and mild soap. Glass surfaces glass should be cleaned often. Gm glass cleaner or a liquid household glass cleaner will remove normal tobacco smoke and dust films on interior glas...

  • Page 419: Washing Your Vehicle

    Washing your vehicle the paint finish on the vehicle provides beauty, depth of color, gloss retention, and durability. The best way to preserve the vehicle’s finish is to keep it clean by washing it often with lukewarm or cold water. Do not wash the vehicle in the direct rays of the sun. Use a car w...

  • Page 420: Blades

    Exterior painted surfaces are subject to aging, weather, and chemical fallout that can take their toll over a period of years. To help keep the paint finish looking new, keep the vehicle in a garage or covered whenever possible. Windshield, backglass, and wiper blades if the windshield is not clear ...

  • Page 421: Tires

    Use chrome polish only on chrome-plated wheels, but avoid any painted surface of the wheel, and buff off immediately after application. Notice: if you drive your vehicle through an automatic car wash that has silicone carbide tire cleaning brushes, you could damage the aluminum or chrome-plated whee...

  • Page 422: Underbody Maintenance

    Underbody maintenance chemicals used for ice and snow removal and dust control can collect on the underbody. If these are not removed, corrosion and rust can develop on the underbody parts such as fuel lines, frame, floor pan, and exhaust system even though they have corrosion protection. At least e...

  • Page 423: Vehicle Identification

    Description usage swirl remover polish removes swirl marks, fine scratches, and other light surface contamination. Cleaner wax removes light scratches and protects finish. Foaming tire shine low gloss cleans, shines, and protects in one step. No wiping necessary. Wash wax concentrate medium foaming ...

  • Page 424: Electrical System

    Service parts identification label you will find this label on the inside of the glove box. It is very helpful if you ever need to order parts. On this label, you will find the following: • vin • model designation • paint information • production options and special equipment be sure that this label...

  • Page 425

    Fuses and circuit breakers the wiring circuits in your vehicle are protected from short circuits by a combination of fuses, circuit breakers and fusible thermal links. This greatly reduces the chance of fires caused by electrical problems. Look at the silver-colored band inside the fuse. If the band...

  • Page 426

    Fuses usage rr wiper rear window wiper switch seo accy special equipment option accessory ws wpr windshield wipers tbc accy truck body controller accessory ign 3 rear heated seats module 4wd four-wheel drive switch, air suspension switch/module htr a/c not used lock power door lock relay (lock funct...

  • Page 427

    Fuses usage rr fog lp not used brake brake switch driver unlock power door lock relay (driver’s door unlock function) ign 0 brake transmission shift interlock, powertrain control module, transmission tbc ign 0 truck body controller veh chmsl vehicle and trailer high mounted stoplamp lt trlr st/trn l...

  • Page 428

    Center instrument panel fuse block the center instrument panel utility block is located underneath the instrument panel, to the left of the steering column. Device usage seo special equipment option/off-road lamps harness connector trailer trailer brake wiring upfit upfitter (not used) sl ride ride ...

  • Page 429: Underhood Fuse Block

    Underhood fuse block the underhood fuse block in the engine compartment is located on the driver’s side of the vehicle near the battery. Lift the cover for access to the fuse/relay block. To remove fuses if you don’t have a fuse extractor, hold the end of the fuse between your thumb and index finger...

  • Page 430

    5-114.

  • Page 431

    Fuses usage glow plug not used cust feed gasoline accessory power hybrid hybrid stud #1 accessory power/trailer wiring mbec 1 mid bussed electrical center power feed, front seats, right doors blower front climate control fan lbec 2 left bussed electrical center, door modules, door locks, auxiliary p...

  • Page 432

    Fuses usage 4ws vent solenoid canister rr hvac not used aux pwr auxiliary power outlet — console ign 1 pcm ignition pcm 1 powertrain control module etc/ecm electronic throttle control, electronic brake controller inj 1 ignition coil, fuel injectors-bank 1 inj 2 ignition coil, fuel injectors-bank 2 i...

  • Page 433

    Fuses usage drl daytime running lamps rvc regulated voltage control ipc/dic instrument panel cluster/driver information center hvac/ecas climate control controller/electronically controlled air suspension cig ltr cigarette lighter hi hdlp-rt high beam headlamp-right hdlp-low headlamp low beam relay ...

  • Page 434

    Auxiliary electric cooling fan fuse block the auxiliary electric cooling fan fuse block is located in the engine compartment on the driver’s side of the vehicle next to the underhood fuse block. Lift the cover for access to the fuse/relay block. Fuses usage cool/fan cooling fan cool/fan cooling fan ...

  • Page 435

    Capacities and specifications the following approximate capacities are given in english and metric conversions. See recommended fluids and lubricants on page 6-13 for more information. Application capacities english metric air conditioning refrigerant escalade escalade esv see refrigerant label loca...

  • Page 436

    Capacities and specifications engine vin code transmission spark plug gap vortec™ 5300 v8 t automatic 0.040 inches (1.01 mm) vortec™ 6000 h.O. V8 n automatic 0.040 inches (1.01 mm) 5-120

  • Page 437: Section 6

    Maintenance schedule ......................................6-2 introduction ...................................................6-2 maintenance requirements ..............................6-2 your vehicle and the environment ....................6-2 using your maintenance schedule ....................6...

  • Page 438: Maintenance Schedule

    Maintenance schedule introduction important: keep engine oil at the proper level and change as recommended. Have you purchased the gm protection plan? The plan supplements your new vehicle warranties. See your warranty and owner assistance booklet or your dealer for details. Maintenance requirements...

  • Page 439: Caution:

    Because of all the different ways people use their vehicles, maintenance needs vary. You may need more frequent checks and replacements. So please read the following and note how you drive. If you have any questions on how to keep your vehicle in good condition, see your gm goodwrench ® dealer. This...

  • Page 440: Scheduled Maintenance

    The proper replacement parts, fluids and lubricants to use are listed in recommended fluids and lubricants on page 6-13 and normal maintenance replacement parts on page 6-15. When your vehicle is serviced, make sure these are used. All parts should be replaced and all necessary repairs done before y...

  • Page 441

    Scheduled maintenance service maintenance i maintenance ii change engine oil and filter. See engine oil on page 5-13. Reset oil life system. See engine oil life system on page 5-16. An emission control service. • • lubricate chassis components. See footnote #. • • visually check for any leaks or dam...

  • Page 442

    Additional required services the following services should be performed at the first maintenance service ( i or ii ) after the indicated miles (kilometers) shown for each item. Additional required services service and miles (kilometers) 25,000 (41 500) 50,000 (83 000) 75,000 (125 000) 100,000 (166 0...

  • Page 443: Maintenance Footnotes

    Additional required services (cont’d) service and miles (kilometers) 25,000 (41 500) 50,000 (83 000) 75,000 (125 000) 100,000 (166 000) 125,000 (207 500) 150,000 (240 000) replace spark plugs and inspect spark plug wires. An emission control service. • engine cooling system service (or every 5 years...

  • Page 444

    (b) visually inspect front and rear suspension and steering system for damaged, loose or missing parts, signs of wear or lack of lubrication. Inspect power steering lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc. Visually check constant velocity joints, rubber boots and axl...

  • Page 445: Owner Checks And Services

    (i) drain, flush and refill cooling system. This service can be complex; you should have your dealer perform this service. See engine coolant on page 5-23 for what to use. Inspect hoses. Clean radiator, condenser, pressure cap and filler neck. Pressure test the cooling system and pressure cap. (j) a...

  • Page 446: At Least Once A Month

    Engine coolant level check check the engine coolant level and add dex-cool ® coolant mixture if necessary. See engine coolant on page 5-23 for further details. Windshield washer fluid level check check the windshield washer fluid level in the windshield washer tank and add the proper fluid if necess...

  • Page 447: Caution:

    Automatic transmission shift lock control system check { caution: when you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before you start, be sure you have enough room around the vehicle. It should be parked on a level surface. 2...

  • Page 448: Caution:

    Parking brake and automatic transmission park (p) mechanism check { caution: when you are doing this check, your vehicle could begin to move. You or others could be injured and property could be damaged. Make sure there is room in front of your vehicle in case it begins to roll. Be ready to apply th...

  • Page 449: Recommended Fluids And

    Recommended fluids and lubricants fluids and lubricants identified below by name, part number or specification may be obtained from your dealer. Usage fluid/lubricant engine oil engine oil which meets gm standard gm6094m and displays the american petroleum institute certified for gasoline engines st...

  • Page 450

    Usage fluid/lubricant transfer case dexron ® -iii automatic transmission fluid. Look for “approved for the h-specification” on the label. Front axle propshaft spline or one-piece propshaft spline (two-wheel drive with auto. Trans.) spline lubricant, special lubricant (gm part no. U.S. 12345879, in c...

  • Page 451

    Normal maintenance replacement parts replacement parts identified below by name, part number or specification can be obtained from your gm dealer. Part gm part number acdelco ® part number engine air cleaner/filter 5300 v8 5300 v8 (high capacity) and 6000 v8 25313349 25313348 a1518c a1519c oil filte...

  • Page 452: Maintenance Record

    Maintenance record after the scheduled services are performed, record the date, odometer reading, who performed the service and the type of services performed in the boxes provided. See maintenance requirements on page 6-2 in this section. Any additional information from owner checks and services on...

  • Page 453

    Maintenance record (cont’d) date odometer reading serviced by maintenance i or maintenance ii services performed 6-17.

  • Page 454

    Maintenance record (cont’d) date odometer reading serviced by maintenance i or maintenance ii services performed 6-18.

  • Page 455: Section 7

    Customer assistance and information ...............7-2 customer satisfaction procedure ......................7-2 online owner center ......................................7-4 customer assistance for text telephone (tty) users ................................7-4 customer assistance offices .............

  • Page 456: Customer Assistance And

    Customer assistance and information customer satisfaction procedure your satisfaction and goodwill are important to your dealer and to cadillac. Normally, any concerns with the sales transaction or the operation of your vehicle will be resolved by your dealer’s sales or service departments. Sometime...

  • Page 457

    Step three: both general motors and your dealer are committed to making sure you are completely satisfied with your new vehicle. However, if you continue to remain unsatisfied after following the procedure outlined in steps one and two, you should file with the bbb auto line program to enforce any a...

  • Page 458: Online Owner Center

    Online owner center the owner center is a resource for your gm ownership needs. Specific vehicle information can be found in one place. The online owner center allows you to: • get e-mail service reminders. • access information about your specific vehicle, including tips and videos and an electronic...

  • Page 459

    United states — customer assistance cadillac customer assistance center cadillac motor car division p.O. Box 33169 detroit, mi 48232-5169 1-800-458-8006 1-800-833-2622 (for text telephone devices (ttys) roadside assistance: 1-800-882-1112 fax number: 313-381-0022 from puerto rico: 1-800-496-9992 (en...

  • Page 460: Gm Mobility Reimbursement

    Gm mobility reimbursement program this program, available to qualified applicants, can reimburse you up to $1,000 toward eligible aftermarket driver’s or passenger’s adaptive equipment you may require for your vehicle, such as hand controls and wheelchair/scooter lifts. The offer is available for a ...

  • Page 461

    Cadillac owner privileges™ roadside service provides several cadillac owner privileges™ at “no charge,” throughout your cadillac warranty period — 48 months/50,000 miles (80 000 km). Emergency road service is performed on site for the following situations: • towing service • battery jump starting • ...

  • Page 462: Courtesy Transportation

    Roadside service for the hearing or speech impaired roadside service is prepared to assist owners who have hearing difficulties or are speech impaired. Cadillac has installed special telecommunication devices called text telephone (tty) in the roadside service center. Any customer who has access to ...

  • Page 463

    Transportation options warranty service can generally be completed while you wait. However, if you are unable to wait cadillac helps minimize your inconvenience by providing several transportation options. Depending on the circumstances, your dealer can offer you one of the following: shuttle servic...

  • Page 464: Data Recorders

    Additional program information courtesy transportation is available during the bumper-to-bumper warranty coverage period, but it is not part of the new vehicle limited warranty. A separate booklet entitled warranty and owner assistance information furnished with each new vehicle provides detailed wa...

  • Page 465

    Unlike the data recorders on many airplanes, these on-board systems do not record sounds, such as conversation of vehicle occupants. To read this information, special equipment is needed and access to the vehicle or the device that stores the data is required. Gm will not access information about a ...

  • Page 466: Reporting Safety Defects

    Reporting safety defects reporting safety defects to the united states government if you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the national highway traffic safety administration (nhtsa), in addition to notifying...

  • Page 467: Reporting Safety Defects

    Reporting safety defects to general motors in addition to notifying nhtsa (or transport canada) in a situation like this, we certainly hope you will notify us. Please call us at 1-800-458-8006, or write: cadillac customer assistance center cadillac motor car division p.O. Box 33169 detroit, mi 48232...

  • Page 468

    Service bulletins service bulletins give technical service information needed to knowledgeably service general motors cars and trucks. Each bulletin contains instructions to assist in the diagnosis and service of your vehicle. In canada, information pertaining to product service bulletins can be obt...

  • Page 469

    A accessory power outlets ................................. 3-21 adding equipment to your airbag-equipped vehicle ....................................................... 1-86 additives, fuel ................................................. 5-6 add-on electrical equipment ..............................

  • Page 470

    Audio system(s) (cont.) cd changer ............................................... 3-99 chime level adjustment ............................. 3-106 diversity antenna system ............................ 3-106 navigation/radio system .............................. 3-96 radio with cassette and cd .........

  • Page 471

    Care of (cont.) your cds and dvds .................................. 3-105 cargo cover .................................................. 2-44 cd changer ................................................... 3-99 center console storage area ........................... 2-42 center passenger position, s...

  • Page 472

    Coolant (cont.) surge tank pressure cap ............................. 5-26 cooled seats ........................................... 1-5, 1-10 cooling system .............................................. 5-29 cruise control lever ....................................... 3-11 cruise control light .......

  • Page 473

    Driving at night ..................................................... 4-31 city ........................................................... 4-36 defensive ..................................................... 4-2 drunken ....................................................... 4-2 freeway .............

  • Page 474

    Fluid (cont.) fog lamps .................................................... 3-16 front axle ...................................................... 5-47 fuel ............................................................... 5-5 additives ...................................................... 5-6 calif...

  • Page 475

    Heater ........................................................... 3-22 highbeam on light ......................................... 3-47 highway hypnosis ........................................... 4-39 hill and mountain roads .................................. 4-39 homelink ® transmitter .............

  • Page 476

    Light (cont.) low fuel warning ....................................... 3-48 low tire pressure warning light ................... 3-39 malfunction indicator .................................... 3-42 passenger airbag status indicator .................. 3-35 safety belt reminder ...........................

  • Page 477

    Mirrors (cont.) outside automatic dimming mirror with curb view assist ............................................. 2-35 outside convex mirror ................................. 2-34 outside heated mirrors ................................ 2-34 outside power mirrors .....................................

  • Page 478

    Power (cont.) retained accessory (rap) ............................ 2-19 seat ............................................................ 1-3 steering fluid ............................................. 5-34 windows .................................................... 2-15 programmable automatic do...

  • Page 479

    Restraint systems (cont.) replacing parts ........................................... 1-87 retained accessory power (rap) ...................... 2-19 right front passenger position, safety belts ...... 1-41 road sensing suspension ................................. 4-9 roadside service .................

  • Page 480

    Shifting into park (p) ....................................... 2-26 shifting out of park (p) ................................... 2-27 signals, turn and lane-change .......................... 3-8 spare tire ..................................................... 5-98 installing ...........................

  • Page 481

    Tires (cont.) storing a flat or spare tire and tools ............ 5-94 tire sidewall labelling .................................. 5-61 tire terminology and definitions .................... 5-64 uniform tire quality grading ......................... 5-75 wheel alignment and tire balance ................

  • Page 482

    W warning lights, gages and indicators ................ 3-31 warnings dic warnings and messages ........................ 3-53 hazard warning flashers ............................... 3-6 other warning devices .................................. 3-6 safety and symbols .....................................