Caen DT5519EM Manual - Electronic Instrumentation
CAEN
Electronic Instrumentation
DT55xxE Desktop HV Power Supply
14
• Select “File” > send file
• Browse the image file (for example DT55XXE.102)
• Select “open”
• Wait the upload to complete until this message is shown:
• Select “File” > disconnect
• unplug the USB cable
• connect once again to the module, via USB
• now the unit is ready to operate running the upgraded firmware
Format EEPROM
By typing F on Terminal Board Menu (Fig. 10) it is possible to access the format EEPROM menu.
Fig. 12: Format EEPROM Menu
Channels settings
By typing D on Terminal Board Menu (Fig. 10) it is possible to access channels settings.
To change one parameter: point the parameter with the “arrow keys”, and type the desired value, confirm
by pressing
Fig. 13: Channels Menu
By typing G, the channels are accessed in “group” mode (one setting applies to all channels).